Heavy duty shelf standards give installers a solid vertical track for building adjustable shelving runs in closets, garages, and storage walls. This Reeve Store Equipment Company model RV20 single slotted standard is designed to work with RV41, RV43, RV81, and RV83 series brackets, so it ties directly into a known bracket family many shops already stock. The standard is 11/16 inch wide and 7/16 inch deep, which helps it sit neatly along wall studs while still giving enough bearing surface for the bracket hooks. Material is 7/8 inch thick cold rolled steel, providing a rigid backbone for higher-load shelving layouts where deflection control matters. Adjustable slots are laid out in 1 inch increments, so installers can move shelves up or down in predictable steps without odd gaps. A Brillatone zinc finish gives the steel a clean, bright look that pairs well with typical closet and garage hardware.
The RV20 heavy duty shelf standard is laid out with screw holes on 12 inch centers, so fastener placement follows a simple vertical rhythm that pairs well with stud framing. Using #7 flat head screws matches the recommended fastener size to the existing holes, which helps the head seat cleanly and pull the 7/8 inch thick cold rolled steel tight to the wall. Slots are set in 1 inch increments along the length, so matching bracket positions across multiple standards becomes a straightforward counting exercise rather than a measurement chore. With an 11/16 inch width and 7/16 inch depth, the standard occupies a compact footprint that fits comfortably in tight closet returns while still leaving room for the RV41, RV43, RV81, or RV83 brackets to lock into the single slots.
The Reeve RV20 heavy duty shelf standard sits in the Shelf, Closet & Garage Organization category under Shelf Standards & Brackets, so it is geared toward built-in storage runs rather than light display work. The Brillatone zinc finish gives a bright, neutral appearance that works in open closets, utility rooms, and garage storage where hardware is fully visible. Available lengths of 24, 36, 48, 60, 72, 84, and 96 inches let installers match the standard height to the project, from short pantry bays to full-height wall units. Because the RV20 is typically used with RV41, RV43, RV81, and RV83 series brackets, it integrates into projects that already specify that Reeve bracket line. The 11/16 inch width and 7/16 inch depth keep the standard slim on the wall, which helps when running multiple verticals close together for narrow shelves or tight alcoves.
The RV20 shelf standard uses slots at 1 inch increments, giving a uniform pitch that makes it easy to repeat bracket heights along a run or across matching bays. This regular spacing is helpful when retrofit work calls for adding new shelves to an existing Reeve installation using the same RV41, RV43, RV81, or RV83 brackets. Screw holes placed on 12 inch centers help installers sync fasteners with typical stud layouts without measuring every point, supporting consistent anchoring on new construction and remodel work. The 7/8 inch thick cold rolled steel construction keeps the standard stiff under load, which supports predictable shelf alignment over time when brackets and shelves are repositioned. Available lengths from 24 through 96 inches give flexibility to cut or select standards that span from low utility shelving up to near-ceiling storage, keeping layout options open without changing hardware families. The Brillatone zinc finish on the steel provides a bright, metallic surface that visually matches other zinc shelving components, so replacements and extensions blend into existing Reeve Store Equipment Company installations.
The RV20 shelf standard is typically used with RV41, RV43, RV81, and RV83 series brackets, so those brackets hook into the single slots and carry the shelf loads.
The RV20 shelf standard has slots on 1 inch increments, so installers can step shelves up or down evenly and match bracket heights across multiple standards quickly.
The RV20 shelf standard is set up for #7 flat head screws, so the shank size and countersunk head suit the pre-punched holes for snug wall mounting.
The RV20 shelf standard has screw holes on 12 inch centers, which lines up well with typical framing layouts and simplifies vertical fastener placement.
The RV20 shelf standard is made from 7/8 inch thick cold rolled steel with a Brillatone zinc finish, giving a rigid body and a bright, metallic appearance.
The RV20 shelf standard is available in 24, 36, 48, 60, 72, 84, and 96 inch lengths, covering short utility sections through full-height storage walls.
This Reeve 20-2 RV20 heavy duty shelf standard from Wurth Baer Supply ties directly into RV41, RV43, RV81, and RV83 brackets, so it supports a complete adjustable shelving system. With 1 inch slot increments, 12 inch screw hole centers, and lengths from 24 to 96 inches, it adapts to short and tall runs in closets, garages, and storage walls. The 7/8 inch thick cold rolled steel body with Brillatone zinc finish delivers a compact, bright track at 11/16 inch wide by 7/16 inch deep that fits cleanly against the wall. Use this RV20 standard when a Reeve Store Equipment Company bracket layout and predictable, repeatable shelf adjustment are required across multiple bays.
Sold In: 1 Each
