Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
14 inch RV723 heavy duty shelf bracket sets up a 14 inch long support arm for shelving, so you can plan closet or storage runs around a known projection. The bracket is part of the Reeve Store Equipment Company RV723 model line, giving consistency when you match it with other RV723 brackets in a project. This 723-L-14 version has a left flange type, which orients the flange to work on the left side of a shelf run or bay. The bracket is in the Shelf Standards & Brackets class and is typically used with the RV700 series standard, so it fits into standard-and-bracket layouts that use RV700 uprights. A satin zinc Brillatone finish gives the bracket a bright zinc appearance, which helps it blend with common commercial standards while resisting typical shop and storage area conditions.
The RV723 model bracket is typically used with the RV700 series standard, so its engagement teeth and stabilizer tooth are shaped to lock into RV700-style slots along the upright. The two engagement teeth carry the primary vertical load into the RV700 standard, giving the bracket a direct load path to the wall-mounted standard. The stabilizer tooth helps resist sway, so the 14 inch arm stays steadier when shelving is loaded or unloaded. The flange has keyhole slots for shelf mounting, allowing the shelf to be fastened down through those openings so the shelf remains tied to the steel arm in regular storage use.
This 14 inch RV723 heavy duty shelf bracket from Reeve Store Equipment Company fits shelf, closet, and garage organization projects built around standards and brackets. The RV723 model is typically used with the RV700 series standard, so it suits installations where RV700 uprights are already mounted or specified. The 14 inch length suits medium-depth shelving, giving enough projection for typical closet or storage shelves without extending into aisle space more than needed. This 723-L-14 left flange configuration aligns the flange on the left side of a run, so it works well at the left end of a shelf or at positions where a left-oriented flange matches your shelving layout. Across the RV723 line, the availability of left, right, and center flange types lets you repeat the same material family while tailoring bracket positions along longer shelving spans.
The weight rating of 230-520 lb per pair, based on length, shows that the RV723 bracket design is developed for heavy-duty use when brackets are paired under a shelf. For the 14 inch version, this rating framework guides how the bracket participates in supporting loaded shelving in storage environments. The .085 inch thick tempered steel material adds cross-section and strength to the bracket arm, helping it resist bending when substantial loads are placed on the shelf. The two engagement teeth and stabilizer tooth secure the bracket into the RV700 series standard, so vertical loads flow into the standard while side-to-side sway is reduced during normal use. The flange with keyhole slots for shelf mounting ties the shelf surface to the steel bracket, so the shelf stays located on the arm when loads shift. The satin zinc finish protects the steel and provides a consistent appearance with zinc-finished standards, supporting a uniform look across a full storage system.
The 14 inch RV723 heavy duty shelf bracket is typically used with the RV700 series standard, so its teeth and stabilizer tooth engage that style of upright in standard-and-bracket layouts.
The bracket in this listing is 14 inches long, so it supports shelf depths designed around a 14 inch projection in closet, garage, or general storage installations.
The manufacturer part number 723-L-14 identifies a Reeve RV723 bracket with a left flange type and 14 inch length, helping align this bracket with matching pieces in the same system.
The Reeve RV723 bracket has a weight rating of 230-520 lb per pair, based on length, so paired brackets provide heavy-duty support when sized correctly for shelf depth.
The RV723 bracket uses two engagement teeth and a stabilizer tooth to secure into the RV700 series standard, which helps transfer load and reduce sway in use.
This Reeve RV723 bracket is made from .085 inch thick tempered steel with a satin zinc Brillatone finish, giving steel strength with a bright zinc appearance.
The 14 inch RV723 heavy duty shelf bracket in satin zinc from Reeve Store Equipment Company pairs with RV700 series standards, so it fits standard-based storage layouts using that upright family. The 723-L-14 left flange type lets you place this bracket where a left-oriented flange matches your run. With .085 inch thick tempered steel construction and a weight rating of 230-520 lb per pair, based on length, the bracket is built for demanding shelf loads. Use this bracket when a 14 inch projection, satin zinc finish, and RV700 standard interface are all part of the same shelving plan.
Sold In: 1 Each
