Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Extra heavy duty shelf standards give shelving runs a rigid vertical track that supports brackets at repeatable heights, which helps installers build strong, uniform storage in closets, garages, and commercial fixtures. This Reeve Store Equipment Company 710-4 standard is part of the RV700 model family, so it matches the geometry typically used with RV723 and RV766 series brackets for coordinated layouts. The standard is 7/8 inch wide and 5/8 inch deep, so it sits tight to the wall while still providing enough depth for solid bracket engagement. An available 48 inch length lets installers span common cabinet and wall heights with one piece in many jobs. The single slotted design controls bracket position along the run, which keeps shelf rows aligned. Brillatone zinc finish gives the steel a bright look that suits exposed storage where appearance matters.
This RV700 model extra heavy duty shelf standard uses #10 wood screw mounting through holes spaced 12 inches on centers, which ties the 7/8 inch wide upright back into studs or solid backing at regular intervals. The 5/8 inch depth keeps the slotted face close to the wall, helping brackets sit snug to the structure once engaged. Adjustable slots in 2 inch increments run the usable length of the 48 inch standard, giving installers a regular grid to position RV723 and RV766 series brackets at matching heights across multiple uprights. The 1/8 inch thick cold rolled steel body supports the single slotted face so brackets nest firmly in place, which is important when building long shelf runs where alignment must stay consistent from one bay to the next.
The Reeve RV700 extra heavy duty shelf standard fits installations that call for a defined vertical track paired with RV723 and RV766 series brackets, such as closet walls, garage storage, and commercial shelving runs. Its 48 inch length works for many mid-height wall sections, so installers can create full-height support within that span using one continuous upright. The 7/8 inch width gives the standard enough bearing surface to sit flat on studs or blocking behind finished walls, which helps keep the slotted face plumb along its height. With screw holes every 12 inches, the standard lines up naturally with common stud patterns when planned against framing, supporting repetitive fastening on multi-upright layouts. The Brillatone zinc finish presents well in open storage, so these standards can be used where the hardware remains visible as part of the fixture.
The 1/8 inch thick cold rolled steel construction gives this shelf standard a rigid backbone, so the single slotted face can handle bracket engagement without twisting, which matters when shelves carry uneven loads. Adjustable slots in 2 inch increments create a predictable step for moving RV723 and RV766 series brackets up or down, letting installers align rows of shelving, bins, or displays with consistent spacing across an entire run. Screw holes drilled on 12 inch centers coordinate with RV700 and RV710 series fastener recommendations, allowing a repeating screw layout that speeds drilling and driving across multiple standards. The 5/8 inch depth positions the slotted channel close to the wall surface, which helps brackets bear directly against structure, improving the way load transfers into the backing. Together, these details support a clean, repeatable workflow for building adjustable shelving systems.
The 710-4 shelf standard is available in a 48 inch length, which suits many mid-height wall and cabinet applications where a single upright can support multiple shelf levels.
This extra heavy duty RV700 shelf standard is typically used with RV723 and RV766 series brackets, keeping bracket engagement and spacing consistent within the same Reeve system.
The RV700 shelf standard has screw holes set 12 inches on centers, which supports a regular fastening pattern when tying the upright into studs or solid backing.
The 710-4 standard is designed for use with #10 wood screws, so the mounting holes and thickness of the 1/8 inch cold rolled steel are sized for that fastener type.
The shelf standard slots are adjustable in 2 inch increments, allowing shelf brackets to move up or down in even steps to align storage levels across a run.
The 710-4 uses 1/8 inch thick cold rolled steel with a Brillatone zinc finish, giving a bright metallic appearance suitable for exposed shelving installations.
The Reeve Store Equipment Company 710-4 extra heavy duty shelf standard combines a 48 inch RV700 profile, single slotted face, and 2 inch adjustment increments to support adjustable shelving layouts with RV723 and RV766 series brackets. Its 7/8 inch wide by 5/8 inch deep body in 1/8 inch thick cold rolled steel provides a compact but solid track that ties back with #10 wood screws through 12 inch on-center holes. For closet, garage, or commercial storage projects needing a bright Brillatone zinc finish and coordinated bracket geometry, this standard offers a defined structure for building consistent, repeatable shelf runs.
Sold In: 1 Each
