Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Extra heavy duty shelf standards single slotted - Reeve Store Equipment Company 710-7 are steel standards designed to support adjustable shelving runs in storage, closet, or garage layouts where higher loads are expected. The RV700 model uses a single slot pattern so matching Reeve brackets can lock into position along the entire length, giving consistent support for shelves. Each standard is 7/8 inch wide and 5/8 inch deep, so rows can be laid out with predictable spacing along walls or interior panels. The standards are made from 1/8 inch thick cold rolled steel, which provides a solid, rigid mounting surface for brackets in typical woodworking and shop environments. A Brillatone zinc finish is applied to the steel, giving a bright metal look while separating the steel from the surrounding environment. The RV700 model is offered in several lengths from 24 inch through 96 inch, so vertical runs can be sized to match project height.
The RV700 extra heavy duty shelf standard uses screw holes spaced 12 inches on centers, so fastening can follow a repeatable pattern down studs, blocking, or cabinet sides. The standards are designed to work with #10 wood screw fasteners, so installers can match this specification when securing into suitable substrates. The recommended fasteners reference RV700 Series, RV14RV710 Series, and #10 wood screw options, tying this standard directly to commonly used Reeve mounting hardware families. Adjustment in 2 inch increments along the slots lets brackets from the RV723 and RV766 series move up or down in defined steps, so shelf heights can be tuned after the standards are mounted. The 7/8 inch width and 5/8 inch depth help these standards sit neatly along wall planes while still giving enough depth for slot engagement.
The Reeve RV700 extra heavy duty shelf standard is typically used with RV723 and RV766 series brackets, creating a matched system between vertical standards and shelf supports. When the RV700 standard is mounted, RV723 or RV766 brackets engage the single slotted face so shelves can be carried at different levels along the run. Because the system adjusts in 2 inch increments, installers can step shelf heights up or down in even intervals, which is helpful when running several standards side by side in closets, store fixtures, or garage organization zones where shelf lines must match. Available lengths from 24 inch through 96 inch allow short or tall bays to be built from the same model, so a project can mix low runs under counters with full-height storage using consistent hardware. The 84 inch length option supports taller installations where multiple shelves are required over a larger vertical span.
The RV700 standard uses 1/8 inch thick cold rolled steel, giving each piece a solid feel so brackets have a robust surface to bear against when loaded in service. The Brillatone zinc finish on the steel provides a bright, clean metallic appearance that suits exposed shelving installations such as retail fixtures or open garage storage, while also separating the steel surface from direct environmental contact. Screw holes placed every 12 inches on centers simplify layout because each standard can follow the same pattern into studs or panel substrates, helping lines stay straight from top to bottom across multiple bays. The 7/8 inch width and 5/8 inch depth create a slim profile that still allows secure slot engagement for brackets without projecting too far into the storage area. When used with RV723 and RV766 brackets, the single slotted design supports a consistent, repeatable shelf adjustment pattern across an entire installation.
The RV700 is an extra heavy duty, single slotted shelf standard from Reeve Store Equipment Company, made from 1/8 inch thick cold rolled steel with a Brillatone zinc finish for adjustable shelving applications.
The RV700 shelf standard is typically used with RV723 and RV766 series brackets, so the brackets lock into the single slotted face and provide vertical adjustment for shelf positions.
The RV700 standard adjusts in 2 inch increments, allowing shelf brackets to be positioned at regular, repeatable levels, which helps align shelves evenly across multiple standards.
The RV700 standard measures 7/8 inch wide by 5/8 inch deep and is available in lengths of 24, 36, 48, 60, 72, 84, and 96 inches for different vertical spans.
The RV700 uses screw holes set 12 inches on centers and is designed for #10 wood screw fasteners, supporting a consistent fastening pattern along studs or solid panels.
The RV700 uses a Brillatone zinc finish on its cold rolled steel body, giving a bright metallic appearance suitable for visible storage and fixture applications.
The extra heavy duty shelf standards single slotted - Reeve Store Equipment Company 710-7 RV700 model combines 1/8 inch thick cold rolled steel, Brillatone zinc finish, and 2 inch adjustment increments to support adjustable shelving runs. With widths of 7/8 inch, depths of 5/8 inch, and lengths from 24 inch to 96 inch, these standards fit a range of wall and cabinet heights. Screw holes 12 inches on centers and #10 wood screw fastening give a clear fastening pattern. For projects using RV723 or RV766 series brackets, choosing RV700 standards aligns the vertical support system with the bracket family for consistent shelf adjustment.
Sold In: 1 Each
