Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
16 inch heavy duty shelf bracket describes this Reeve Store Equipment Company RV766 model 16 shelf and hang rod bracket in satin zinc finish, so installers get a clear match for closet and shelving layouts. The bracket is made from 1/8 inch thick tempered steel, which supports demanding storage applications where deflection control and long-term strength matter. Its weight rating ranges from 675 to 1,325 lb per pair based on length, so paired brackets can be applied to substantial loads when matched to appropriate spans. This RV766 model is typically used with the RV700 series standard, giving closet and storage system installers a defined standard-and-bracket combination. The satin zinc, described as Brillatone zinc, provides a clean, uniform finish that suits exposed retail or residential closet installs where visible hardware needs a consistent look.
The RV766 heavy-duty shelf and hang rod bracket is typically used with the RV700 series standard, so installers can align bracket locations directly to that standard profile when laying out closet or storage uprights. The two engagement teeth on the bracket seat into the standard, setting the working angle of the 16 inch arm in a consistent plane for shelves. One tooth uses an uphook design, which adds an upward catch that helps resist pull-out forces when shelves are loaded outward. The built-in locknut thumb screw tightens the bracket toward the standard, reducing sway and movement that might otherwise occur under side loading. With its 1/8 inch thick tempered steel construction and 16 inch projection, the bracket supports shelf and hang rod layouts where both reach and strength need to be balanced.
The RV766 model shelf and hang rod bracket is typically used with the RV700 series standard, tying the bracket to a known standard profile for closet and storage systems. That defined pairing lets installers plan vertical spacing and shelf runs around the RV700 uprights while knowing the RV766 arm will engage properly. The two engagement teeth connect the bracket to the standard at two points, distributing forces into the upright rather than relying on a single hook. One engagement tooth features an uphook design, adding a rising catch that supports the bracket when downward and outward loads act on the shelf or hang rod. This engagement style helps the 16 inch tempered steel arm maintain stable support when users place heavier items or slide hangers along the rod. The satin zinc Brillatone finish on the bracket provides a consistent appearance that matches zinc-finished standards in visible installations.
The 1/8 inch thick tempered steel construction of the RV766 bracket provides a substantial arm section, which helps the 16 inch projection resist bending under working loads. The series is rated from 675 to 1,325 lb per pair depending on length, so the 16 inch version fits within a family designed for heavy-duty applications. That rating per pair gives installers a clear capacity reference when pairing brackets under a shelf or rod system. The bracket incorporates a locknut thumb screw that tightens against the RV700 series standard, reducing sway at the connection when side forces act on the shelf or hanging garments. By limiting movement, the locknut feature helps maintain squareness between shelf surfaces and the standard, which is useful where straight lines and consistent reveals are important. Together, the tempered steel, dual-tooth engagement, and locking thumb screw support repeatable performance across multiple bracket locations in a run.
The RV766 16 inch model is a heavy-duty shelf and hang rod bracket from Reeve Store Equipment Company, so it supports both shelving and hanging storage in closet and organization systems.
The RV766 shelf and hang rod bracket is typically used with the RV700 series standard, giving installers a matched standard-and-bracket combination for closet and storage layouts.
The RV766 bracket is made from 1/8 inch thick tempered steel, which provides a strong arm section for supporting shelf and hang rod loads in storage applications.
The RV766 series shelf brackets have a weight rating of 675 to 1,325 lb per pair, depending on length, so bracket pairs can be applied to high-load shelving when spans align with that rating.
The RV766 bracket has a locknut thumb screw that tightens to reduce sway at the standard connection, helping shelves and hang rods feel more solid when loaded or moved.
The RV766 bracket uses two engagement teeth, with one tooth featuring an uphook design, which increases stability and holding power at the RV700 series standard connection.
The 16 inch RV766 heavy-duty shelf and hang rod bracket in satin zinc finish offers a defined arm length, tempered steel construction, and a rated per-pair load capacity from the RV766 series. Its typical pairing with the RV700 series standard, two-tooth engagement with an uphook design, and locknut thumb screw for reduced sway provide a clear hardware choice when planning closet, retail, or storage shelving where both hanging and shelf support are needed.
Sold In: 1 Each
