Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12 inch RV766 heavy duty shelf bracket describes a Reeve Store Equipment Company bracket designed to support shelving and a hang rod from a standard. The bracket length of 12 inches positions the shelf depth and rod reach for typical closet and storage layouts, so installers can plan spacing and clearances with predictable geometry. The bracket is part of the Reeve Model RV766 line, which is typically used with the RV700 series standard, giving store fixture and closet builders a consistent system when laying out uprights and brackets. A satin zinc finish on the bracket creates a Brillatone zinc appearance that blends with common commercial standards and hang rods, helping projects match existing Reeve hardware. The bracket design supports shelf loads when paired correctly, so closets, garages, and retail runs can use a familiar standard-and-bracket system.
The RV766 heavy duty shelf and hang rod bracket uses two engagement teeth to connect into the standard, so the bracket seats positively into the RV700 series upright. One of these engagement teeth has an uphook design, adding additional stability and holding power by resisting downward and outward forces at the connection. The bracket also has a locknut thumb screw, which tightens against the standard to reduce sway in the bracket during everyday use. This thumb screw feature helps shelves and hang rods feel firm when garments or stored items are moved. The 1/8 inch thick tempered steel body resists deformation at the connection points, supporting repeatable engagement over multiple repositionings. The satin zinc finish presents a consistent surface that interfaces cleanly with matching standards and hang rods.
The RV766 heavy duty shelf and hang rod bracket is part of a shelf, closet, and garage organization system, placing it naturally in closets, storage rooms, and similar spaces that use standards and brackets. Within the RV766 line, the available lengths from 8 to 24 inches give planners options for shallow accessory shelves or deeper storage shelves using the same style of bracket. The 12 inch length on this model positions shelves at a depth that works well for typical hang rod clearance below, letting installers coordinate rod location and garment reach. Because this RV766 bracket is typically used with RV700 series standards, projects already built around those standards can continue with consistent geometry. The satin zinc Brillatone finish matches other zinc-finished components, so open installations in closets or retail fixtures maintain a uniform visual line along walls and uprights.
The 1/8 inch thick tempered steel construction of the RV766 bracket contributes to its weight rating of 675 to 1,325 pounds per pair within the series, giving shelving runs the strength needed for heavier loads in storage or merchandising. The two engagement teeth in the bracket seat into the standard at multiple points, distributing load and helping the bracket stay aligned under weight. The uphook design on one of the teeth adds a mechanical catch that resists pull-out, supporting consistent performance when shelves are loaded or bumped. The locknut thumb screw is designed to bear against the standard, reducing bracket sway and lateral movement, so shelves and hang rods feel more secure when items are placed or removed. Together, these details help installers achieve repeatable, stable results when laying out RV700-based systems, from single closets to continuous wall runs.
The RV766 12 inch model is a heavy duty shelf and hang rod bracket from Reeve Store Equipment Company, used in shelf, closet, and garage organization projects that rely on standards and brackets.
The RV766 shelf bracket is typically used with the RV700 series standard, keeping the bracket and upright within the same Reeve system for consistent fit across an installation.
The RV766 bracket locknut thumb screw tightens against the standard to reduce sway, helping shelves and hang rods feel more solid when items are loaded, removed, or shifted.
The two teeth, with one tooth having an uphook design, increase stability and holding power at the standard, resisting pull-out forces and helping the bracket stay seated under load.
This RV766 bracket uses 1/8 inch thick tempered steel with a satin zinc Brillatone finish, combining structural strength with a uniform zinc appearance in visible installations.
The RV766 bracket series is rated at 675 to 1,325 pounds per pair depending on length, supporting heavy-duty shelving where higher load capacity is required.
The 12 inch RV766 heavy duty shelf bracket with satin zinc finish ties shelf depth, hang rod position, and load capacity into a single Reeve component that integrates with RV700 series standards. The 1/8 inch thick tempered steel body, two engagement teeth with an uphook, and a locknut thumb screw work together to give stable support for closets, garage storage, or retail shelving that demands higher capacities. Choosing this RV766 bracket length within the available 8 to 24 inch series helps designers match shelf projection to garments or stored items while maintaining a consistent Brillatone zinc look across the run. For projects already using RV700 standards, this RV766 bracket keeps the system unified from planning through installation.
Sold In: 1 Each
