Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
extra heavy duty shelf standards single slotted give you a strong, repeatable way to support adjustable shelving runs where load capacity and layout flexibility both matter. This Reeve Store Equipment Company RV700 model is part of their extra heavy duty line, so it is built for demanding shelf, closet, and garage organization layouts that rely on metal standards and brackets rather than fixed cleats. The single slotted design works with Reeve RV723 and RV766 series brackets, so the standard, bracket, and shelf act together as a coordinated system. The bar measures 7/8 inch wide by 5/8 inch deep in cross-section, which keeps the profile slim while still leaving enough steel around the slot pattern for strength. The piece is 96 inches long, which suits full-height wall runs and tall storage bays. Brillatone zinc finish on cold rolled steel provides a hard metallic surface, which matters in shop, garage, and closet environments where abrasion resistance and a clean, bright appearance are important over time.
This RV700 extra heavy duty shelf standard is designed around No. 10 screw holes on 12 inch centers, so wall fastening follows a regular vertical spacing that aligns with common practice in closet and storage builds. The 7/8 inch wide face gives enough room to drive No. 10 wood screws through the pre-punched pattern while still leaving metal around the holes, which supports pull-out resistance when brackets and shelves are loaded. The 96 inch length allows the standard to span from low to high shelving positions in one continuous piece, so there is no joint in the upright where bracket loads shift. Adjustable slots in 2 inch increments let the installer or shop technician fine-tune shelf heights by simply moving RV723 or RV766 series brackets up or down instead of altering the wall structure.
This extra heavy duty shelf standards single slotted RV700 model is specified for shelf, closet, and garage organization projects that depend on metal standards and brackets. The 96 inch length suits full-height walls in closets and storage rooms where shelves need to start low and rise close to ceiling level. Being typically used with RV723 and RV766 series brackets, the RV700 standard forms the vertical backbone of a coordinated Reeve Store Equipment Company system, so the slots align with the bracket lugs from top to bottom. The 7/8 inch wide by 5/8 inch deep profile keeps the standard close to finished wall surfaces, which matters when shelves run near doors, trim, or casework. The 1/8 inch thick cold rolled steel section gives the upright enough mass to support heavy-duty shelf brackets in commercial or workshop storage layouts where load-bearing expectations are high.
The RV700 extra heavy duty shelf standard uses slot spacing in 2 inch increments, so shelf elevations can be laid out on a simple 2 inch grid from the floor to the top of the run, which supports consistent spacing between multiple bays. Screw holes on 12 inch centers for No. 10 wood screws let the installer follow a predictable fastening rhythm up the stud, so each standard is secured at regular intervals that line up well with many substrate conditions. The combination of 1/8 inch thick cold rolled steel and a Brillatone zinc finish means the upright has a strong steel core with a protective zinc surface, so the bar maintains its shape while presenting a hard, bright finish in day-to-day use. At 96 inches long, each standard covers a tall vertical span in one piece, so every RV723 or RV766 bracket location is supported by a continuous length of metal without breaks that could shift under load. Together, these details support repeatable shelf layouts across multiple walls or units built to the same pattern.
The RV700 extra heavy duty shelf standard is 96 inches long, so it covers tall wall sections and allows a wide range of shelf heights along a single continuous upright.
The RV700 shelf standard is typically used with RV723 and RV766 series brackets, so those bracket lines are designed to fit the single slotted pattern along the standard.
The RV700 shelf standard has adjustable slots in 2 inch increments, so shelf heights change by moving RV723 or RV766 brackets up or down one or more slot positions.
The RV700 shelf standard is made from 1/8 inch thick cold rolled steel with a Brillatone zinc finish, so it combines solid steel strength with a zinc-coated metallic surface.
The RV700 shelf standard uses screw holes on 12 inch centers sized for No. 10 wood screws, so fasteners follow a regular vertical pattern up the wall or backing.
The RV700 shelf standard measures 7/8 inch wide by 5/8 inch deep, so it presents a compact face while still providing area for slots and screw holes.
The Reeve Store Equipment Company RV700 extra heavy duty shelf standard in Brillatone zinc combines a 96 inch length, 7/8 inch by 5/8 inch profile, and 1/8 inch thick cold rolled steel to support demanding shelf, closet, and garage organization layouts. Slots in 2 inch increments and screw holes on 12 inch centers for No. 10 wood screws give a predictable pattern that lines up well with repeatable shelf spacing and wall fastening. Pairing this RV700 model with RV723 and RV766 series brackets keeps the system within a single Reeve standard-and-bracket family designed to work together along the full height of the run.
Sold In: 1 Each
