
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Extra heavy duty shelf brackets are built as single slotted flanged brackets that support shelving on Reeve standards, so runs can carry substantial weight in closet, garage, or storage layouts. This Reeve Store Equipment Company model RV723 bracket is identified as a center bracket in the 10 inch length, so it works in the middle position between left and right brackets in a Reeve layout. The bracket is typically used with the RV700 series standard, so the engagement teeth and stabilizer tooth are matched to that upright profile in real use. Material is .085 inch thick tempered steel, which resists bending under load so shelving stays straighter over time. A Brillatone zinc finish is specified, which provides a tough metallic surface that stands up to normal shop and storage conditions while keeping the bracket looking consistent with other Reeve hardware.
This Reeve RV723 center bracket is defined at a 10 inch length, so it matches shelving depths built around that projection from the upright. The design is single slotted with a flange, so it engages in a compatible standard and then projects under the shelf for direct support. The flange carries keyhole slots, which lets the installer position shelf fasteners, drop the shelf into place, and seat it solidly to the bracket. The two engagement teeth and stabilizer tooth form the interface to the RV700 series standard, so the bracket locates in a repeatable position up and down the upright. This style of connection reduces sway at the standard, keeping shelves more stable when loads are added or removed.
The Reeve Store Equipment Company 723-C-10 bracket is called out as a center bracket in the RV723 model family, so it is intended to occupy the middle positions between left and right brackets in a shelving run. It is typically used with the RV700 series standard, meaning the tooth pattern and stabilizer tooth geometry are matched to that standard for a positive fit. Available lengths for this RV723 bracket line are listed as 10, 12, 14, 16, 18, 20, and 22 inches, so the 10 inch version aligns with shallower shelving where space or traffic aisles are tighter. The tempered steel construction and weight rating of 230-520 lb per pair, depending on length, give a clear performance envelope for planning loads across the system. Brillatone zinc finish supports use in closet, garage, or storage areas where a bright metallic finish coordinates with typical standards and other components.
The bracket flange is designed with keyhole slots for shelf mounting, so installers can set fasteners on the underside of a shelf, drop the shelf over the flange, and pull it tight, which speeds work when repeating the process across multiple levels. The two engagement teeth on the RV723 bracket bite into the RV700 series standard, while the stabilizer tooth reduces sway, so each bracket seats squarely and resists rocking when lateral forces are applied during everyday use. Using left, right, and this center flange type together keeps shelf edges aligned, since each bracket style is shaped for its specific run position. The .085 inch thick tempered steel material resists permanent deformation when used within the published pair weight range, so shelves stay level and spacing between brackets remains consistent. In practice, this combination of tooth engagement, stabilizer action, and steel thickness gives a predictable support behavior across a full wall of standards and brackets.
The Reeve 723-C-10 is an RV723 model center bracket in a 10 inch length, so it supports shelves in the middle positions of a Reeve heavy duty shelving layout.
The 723-C-10 bracket uses two engagement teeth and a stabilizer tooth into an RV700 series standard, creating a positive connection that reduces sway along the upright.
The bracket flange has keyhole slots for shelf mounting, allowing a shelf to be positioned over pre-set fasteners and drawn tight for a secure, repeatable connection.
The Reeve RV723 brackets carry a weight rating of 230-520 lb per pair, depending on length, so load planning can match the specific bracket size in the system.
The 723-C-10 bracket is made from .085 inch thick tempered steel with a Brillatone zinc finish, providing a sturdy profile with a bright metallic appearance.
The center flange type is shaped for mid-run support between left and right brackets, helping keep shelf edges aligned and evenly supported across wider spans.
The Reeve Store Equipment Company RV723 723-C-10 center bracket combines a 10 inch length, .085 inch tempered steel, and a 230-520 lb per pair weight rating range to support serious storage loads. Its Brillatone zinc finish and matched tooth design for the RV700 series standard give a consistent interface throughout a shelving run. When building out a Reeve-based system with left, right, and center flange types, this center bracket provides the mid-span support that keeps shelves level and stable under appropriate loading. For projects built around Reeve standards and heavy duty shelf requirements, this specific center bracket model offers the defined geometry and performance needed for repeatable layouts.
Sold In: 1 Each