Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Extra Heavy Duty Shelf Brackets Single Slotted Flanged Brackets - Reeve Store Equipment Company 723-C-12 are designed as center brackets for demanding shelving runs, so they support heavier loads where standard brackets would be stressed. The Reeve Model RV723 designation ties this bracket directly to a proven commercial standard system, which matters when matching to existing store fixtures. This center bracket is typically used with the RV700 series standard, giving installers a clear pairing between bracket and upright when laying out straight, aligned shelving. The 12 inch length matches common shelf depths, so brackets sit close to the front edge for better leverage without wasting capacity. The bracket uses a single slotted design that works with RV700 series standards, keeping engagement consistent along the run. As part of Reeve Store Equipment Companys shelf standards and brackets line, this center bracket fits into a coordinated system for store, closet, or garage organization layouts.
This Reeve 723-C-12 center bracket uses a flanged design with keyhole slots, so shelves can be mounted directly to the flange while keeping the vertical load routed back into the RV700 series standard. The center flange type is intended for positions between left and right ends, which matters when laying out continuous shelving where intermediate supports carry part of the span. The single slotted engagement into the standard, combined with two teeth and a stabilizer tooth, creates a defined connection geometry, allowing installers to repeat the same bracket spacing across multiple bays. The 12 inch length is one of several available lengths in the RV723 line - 10, 12, 14, 16, 18, 20, and 22 inches - so shelf depth choices can follow the same bracket design for consistent fit.
The Reeve RV723 723-C-12 center bracket sits within a shelf, closet, and garage organization category, so it serves in applications where adjustable shelves carry significant weight across standards and brackets. In store equipment layouts, this model is typically used with the RV700 series standard, placing the bracket as a mid-span support along uprights so bay widths can be adjusted while keeping shelf lines straight. The center flange configuration complements separate left and right flange types in the same series, allowing designers to specify matched components for end positions and interior supports. Available lengths of 10, 12, 14, 16, 18, 20, and 22 inches give planners flexibility to choose shelf depths while keeping the same engagement style, so a run can mix shallow and deep shelves without changing bracket families. Within a shelf standards and brackets system, this center bracket helps distribute loads back to the RV700 series standards, supporting organized product displays or storage zones.
The .085 inch thick tempered steel construction gives the Reeve RV723 bracket a predictable structural backbone, so installers can rely on a consistent deflection behavior across all matching lengths. A weight rating of 230-520 lb per pair, based on length, ties each bracket size to a defined load range, which simplifies planning for heavy merchandise or dense stored materials. The two engagement teeth and stabilizer tooth combine to secure the bracket to the RV700 series standard, reducing sway so shelves stay square to the uprights even when bumped or restocked. The Brillatone zinc finish protects the steel and maintains a uniform appearance, which is important when multiple brackets line a wall and need to look consistent from bay to bay. Because three flange types - left, right, and center - exist within this bracket family, a full run can use the same RV723 design while assigning each flange type to its specific position, helping installers repeat layouts across multiple locations with predictable results.
The bracket carries the Reeve Store Equipment Company manufacturer part number 723-C-12 and Reeve Model RV723 designation, so it matches that specific extra heavy duty single slotted flanged center bracket.
The RV723 center bracket uses a single slotted engagement with two teeth and a stabilizer tooth, so it locks into the RV700 series standard and resists sway during everyday loading.
The extra heavy duty bracket has a weight rating of 230-520 lb per pair, based on length, which supports planning for heavy shelving loads within that defined range.
The 723-C-12 bracket uses .085 inch thick tempered steel with a Brillatone zinc finish, giving it a robust structure and a protected metallic surface for visible shelving.
This center bracket is typically used with the Reeve RV700 series standard, so it fits into that specific upright system in store or organization layouts.
The Reeve RV723 bracket family offers three flange types - left, right, and center - so each position along a shelving run can use the flange style suited to that location.
The Reeve 723-C-12 extra heavy duty center bracket gives you a defined 12 inch support in the RV723 series, so shelf depth and loading can follow known values. Its use with the RV700 series standard, .085 inch thick tempered steel, and Brillatone zinc finish align this bracket with demanding shelving runs. The combination of two engagement teeth, a stabilizer tooth, and keyhole slots in the flange turns a simple component into a precise support point that helps hold straight, level shelves. For projects that call for coordinated left, right, and center flanged supports, this center bracket lets you build a consistent Reeve RV723-based system.
Sold In: 1 Each
