Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
extra heavy duty shelf standards create a strong vertical track for brackets, so you can build adjustable shelving runs that stay aligned from floor to ceiling. This Reeve Store Equipment Company model 710-5 is a single slotted standard, so each slot only accepts one bracket leg, which helps keep bracket positioning consistent along the wall. The standard is 7/8 inch wide and 5/8 inch deep, so it sits close to the wall while still giving enough bearing for heavy brackets. It is made from 1/8 inch thick cold rolled steel, giving the upright a robust section for loads typically seen in closet, garage, or store fixture shelving. The Brillatone zinc finish covers the steel, so the surface has a bright zinc appearance that fits exposed retail or storage layouts while providing a coated surface wherever the standard is installed.
The RV700 shelf standard uses screw holes drilled on 12 inch centers, so each foot of vertical run has a defined fastening point for #10 wood screws where that size is specified. This repeating pattern keeps layout straightforward when you are lining up multiple standards along a wall, because each one fastens on the same spacing. The standard is 7/8 inch wide, so it presents a narrow face that lands cleanly on typical studs or solid blocking while still giving room for the screw line. With the 5/8 inch depth and single slotted profile, brackets seat within the channel while remaining close to the wall, which helps shelves sit near flush to the surface they are mounted against.
The RV700 shelf standard is listed as extra heavy duty, so it is set up for shelving applications where stronger steel uprights are required, such as closet storage, garage shelving, or store fixture runs. It is typically used with RV723 and RV766 series brackets, so those brackets can be dropped into the single-slotted track wherever a slot lines up on the 2 inch vertical grid. The 60 inch length suits mid-height walls or sections below ceilings in many residential or commercial spaces, so one continuous standard can cover the usable height for multiple shelves. With available lengths ranging from 24 to 96 inches, RV700 standards can follow different wall heights across a project, so shorter standards can be used under windows or over workbenches while taller standards run up full-height walls.
The 1/8 inch thick cold rolled steel material gives the RV700 standard a solid cross-section, so the upright resists bending when brackets and shelves are loaded in normal shelving layouts. Because adjustment happens in 2 inch increments, shelf levels across several standards line up on the same vertical pitch, which helps when you are running long shelves that bridge between multiple uprights. The single slotted design means each bracket engages one slot width, so the bracket location remains predictable along the upright, which helps keep shelf edges straight. The Brillatone zinc finish covers the face and slot edges, so the surface has a bright metallic appearance that matches many metal bracket finishes while providing a coated surface on the steel in typical indoor shelving environments.
The RV700 shelf standard is typically used with RV723 and RV766 series brackets, so those bracket models are set up to engage the single slotted track on this upright.
This version of the extra heavy duty shelf standard is 60 inches long, so it provides five feet of vertical adjustment for shelving layouts that fit that height.
The RV700 shelf standard is adjustable in 2 inch increments, so bracket positions follow a regular vertical grid when setting shelf heights.
The RV700 standard has screw holes on 12 inch centers and is associated with #10 wood screws, so fasteners land at regular intervals along the upright.
The RV700 shelf standard measures 7/8 inch wide by 5/8 inch deep, so it sits close to the wall while still presenting a stable face for brackets.
The RV700 shelf standard is made from 1/8 inch thick cold rolled steel with a Brillatone zinc finish, so it combines a solid steel section with a bright zinc surface.
This Reeve Store Equipment Company RV700 extra heavy duty shelf standard pairs a 60 inch length with 2 inch adjustment and screw holes on 12 inch centers, so it fits shelving runs that need regular bracket spacing over a five foot height. The 7/8 inch by 5/8 inch profile in 1/8 inch thick cold rolled steel with Brillatone zinc finish suits closet, garage, or store fixture projects that specify RV723 or RV766 series brackets. For shelving layouts that match these dimensions and components, this standard offers a consistent track to support the run.
Sold In: 1 Each
