Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
14 inch heavy duty shelf bracket from Reeve Store Equipment Company provides combined shelf and hang rod support for closet, storage, or garage layouts where high load capacity is critical. The RV766 model in the 14 inch length is part of Reeve shelf standards and brackets hardware, so it functions as a main load-carrying arm in a standard-based system. Its satin zinc finish creates a bright metal look on exposed runs, helping it blend with typical closet and retail hardware. As a shelf and hang rod bracket, it supports both a horizontal shelf and a hanging tube in the same footprint, allowing denser storage on the same section of standard. This bracket is typically used with the RV700 series standard, so it slots into that track style for straightforward layout changes or additions along a run.
This Reeve RV766 heavy duty shelf and hang rod bracket is typically used with the RV700 series standard, so it is dimensioned to seat into that style of slotted vertical track. The two engagement teeth interface with the RV700 slots, setting the bracket angle and depth along the standard. Because one tooth features an uphook design, the bracket resists lift-out forces when loads shift on the shelf or hang rod. The locknut thumb screw works at the standard connection, so the installer tightens it by hand to pull the bracket closely against the standard face. In practice, this combination of teeth engagement and locknut pressure creates a stable support point for a 14 inch deep shelf and hang rod layout along the run.
The Reeve RV766 model in 14 inch length fits shelf, closet, and garage organization projects that use Reeve-style shelf standards and brackets. Because it is typically used with the RV700 series standard, it suits installations where that specific standard series defines the vertical structure. The 14 inch depth allows a reasonably deep shelf, so it supports folded garments, storage bins, or retail merchandise in front of the standard line. At the same time, its hang rod capability lets a tube sit under the shelf, so one bracket supports two storage planes in a compact footprint. Available lengths in this model family range from 8 to 24 inches, so the 14 inch version sits mid-range for projects needing moderate depth without extending too far into the room.
The 675 to 1,325 lb weight rating per pair sets this RV766 bracket in a heavy duty class, so installers can design sections knowing that each pair carries significant static shelf and rod loads. The use of 1/8 inch thick tempered steel provides the structural backbone for this rating, so deflection under normal loads is minimized compared to thin-gauge alternatives. The two engagement teeth share forces into the RV700 series standard, so loading does not concentrate on a single point in the track. The uphook design on one tooth adds mechanical resistance against uplift, so accidental upward knocks on the shelf front or hang rod are better controlled at the connection. The locknut thumb screw further reduces sway by clamping the bracket toward the standard, so side-to-side movement under shifting loads is diminished. With a satin zinc, or Brillatone, finish on that tempered steel, the bracket carries its rated loads in typical indoor environments while presenting a clean metallic appearance on exposed installations.
The 14 inch RV766 heavy duty shelf and hang rod bracket supports a shelf above and a hang rod below, so one bracket serves both storage surfaces in a closet or garage run.
The bracket locknut thumb screw tightens the arm toward the standard, so sway is reduced when loads shift on the shelf or hanging rod.
The Reeve RV766 bracket is typically used with the RV700 series standard, so it is suited to projects built around that specific Reeve standard system.
The RV766 bracket uses two engagement teeth so the load transfers into the standard at two points, improving strength and resistance to twisting in the track.
The uphook design on one engagement tooth increases stability and holding power, so upward forces on the shelf or rod are resisted at the standard connection.
The RV766 bracket is made from 1/8 inch thick tempered steel with a satin zinc, or Brillatone, finish, so it offers strength with a bright metallic appearance.
The 14 inch RV766 heavy duty shelf and hang rod bracket with satin zinc finish and 1/8 inch thick tempered steel construction gives installers a defined 675 to 1,325 lb weight rating per pair. Its typical pairing with the RV700 series standard, two engagement teeth with an uphook design, and locknut thumb screw deliver a secure connection for closet, garage, and storage layouts. For projects calling for a mid-depth shelf and integrated hang rod on a Reeve standard system, this RV766 14 inch length offers a practical, heavy duty support option ready to drop into the run.
Sold In: 1 Each
