766 Series 8" Single Slotted Shelf Bracket Zinc

766 Series 8 Inch Single Slotted Shelf Bracket Use

766 Series 8 inch single slotted shelf bracket is an 8 inch Reeve Store Equipment Company bracket designed for shelf, closet, and garage organization projects where a single slotted standard is used. The bracket is Reeve Model RV766, identified as manufacturer part 766-8, so it matches projects built around this specific model line. The bracket is typically used with the RV700 series standard, which keeps layouts consistent when you are building or extending a Reeve standard-and-bracket system. The bracket is made from 1/8 inch thick tempered steel, giving the arm a solid cross-section that supports heavier loads in typical shelving applications. Its Brillatone zinc finish provides a zinc surface that suits store fixtures or utility shelving where a clean metallic look is preferred. The 8 inch length fits shallow to medium-depth shelves within the broader RV766 series, which also covers longer lengths when projects call for deeper runs.

Key Shelf Bracket Details That Support Loads

• The 1/8 inch thick tempered steel material provides a robust arm that resists bending under properly distributed loads, which is important when building store fixtures or garage shelving that must hold weight without drift.
• The bracket has a stated weight rating of 675 to 1,325 lb per pair, based on length, so the RV766 series is engineered for heavy duty shelving applications where high load capacity per pair of brackets is required.
• A locknut thumb screw is standard on the bracket, and this screw reduces sway by tightening the bracket against the standard, which helps shelves feel solid during use and reduces movement in merchandising or storage setups.
• The bracket has two engagement teeth, giving it two contact points in the standard, which helps distribute force into the standard slots and supports stable engagement when the shelf is loaded.
• One of the engagement teeth has an uphook design that adds stability and holding power in the standard, which helps resist lift-out forces when shelves are bumped or loaded and unloaded repeatedly.

Mounting Behavior With RV700 Series Standards

This Reeve Model RV766 8 inch bracket is typically used with the RV700 series standard, so both parts are designed to work as a coordinated system in shelving runs. The two engagement teeth drop into the single slotted standard, then the uphook style tooth engages upward, so the bracket seats securely into the standard when weight is applied. The locknut thumb screw then tightens the bracket against the RV700 series standard, reducing sway along the upright. Because the bracket length is 8 inches, it suits shorter shelf depths, allowing tighter aisle layouts in store fixtures or compact wall storage runs in closets and garages.

Using The RV766 Bracket In Heavy Duty Layouts

Where This RV766 Shelf Bracket Fits Best

This Reeve 766-8 shelf bracket belongs to the RV766 series, which is used in shelf, closet, and garage organization installations built around standards and brackets. Being typically used with the RV700 series standard means it fits projects already using that upright style, such as retail gondolas or wall standards in storage rooms. The 8 inch length is suited to shallower shelves where floor footprint is limited, like narrow aisles or wall-mounted utility shelving. Its Brillatone zinc finish presents a bright zinc look that works in visible store fixtures, while still being practical in back-of-house storage or workshop shelving. Because the weight rating per pair for the RV766 series ranges from 675 to 1,325 lb depending on length, the series is built for heavy duty use where high load capacity per shelf is part of the layout design.

Design Details That Support Stable Shelving

The 1/8 inch thick tempered steel construction gives the bracket arm a solid, repeatable stiffness, so matching brackets along a run share similar deflection under load. The two engagement teeth give the bracket more than one anchor point in the standard, so the load transfers into multiple slots, supporting stable alignment across uprights. The uphook design on one tooth adds a vertical catch, helping resist upward dislodging when shelves are nudged or product is handled roughly. The locknut thumb screw, supplied as a standard feature on the bracket, is tightened against the standard to reduce sway, which is valuable when shelving supports tall loads or where customers or staff contact the shelving frequently. When shelving is laid out with the appropriate number of these brackets per shelf, the high per-pair weight rating of the RV766 series supports confident planning of heavy duty shelf runs.

Common Questions About The 766-8 Shelf Bracket

Choosing This Heavy Duty Zinc Shelf Bracket

The heavy duty zinc shelf bracket described here is the Reeve Model RV766 in an 8 inch length, with a Brillatone zinc finish and 1/8 inch thick tempered steel construction. Its typical use with the RV700 series standard, combined with dual engagement teeth and an uphook tooth design, supports secure seating in standard-and-bracket shelving systems. The stated 675 to 1,325 lb per pair weight rating range for the RV766 series highlights its role in heavy duty layouts. When an 8 inch arm length, tempered steel body, and sway-reducing locknut thumb screw match the shelving plan, this 766-8 bracket provides a focused solution within the RV766 system.