Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch heavy-duty shelf bracket is a Reeve Store Equipment Company RV766 model bracket designed for shelf and hang rod support in closet and organization layouts. The 18 inch length gives installers reach for deeper shelves, which helps when building storage that needs both hanging space and solid shelving. The bracket is 1/8 inch thick tempered steel, so the arm resists bending under load, supporting long-term performance in busy residential or commercial closet runs. A satin zinc finish provides a clean metallic look that matches typical zinc-coated standards and hardware, helping jobs maintain a consistent appearance across multiple brackets and sections. The bracket belongs to the Shelf Standards and Brackets product class, aligning with standard shelf standard layouts where repeat spacing and alignment are critical. This configuration keeps layouts straightforward when planning multiple bays across closet or storage walls.
This RV766 heavy-duty shelf bracket is designed for use with the RV700 series standard, so the engagement points and back profile are formed to sit in that standard's slots for secure support. The bracket comes with a locknut thumb screw, which tightens against the RV700 series standard to reduce sway along the vertical track, important when shelves are loaded or when hang rods are in use. Two engagement teeth interface with the standard, and one tooth has an uphook design that helps the bracket resist pull-out forces and upward movement. This tooth arrangement helps keep brackets seated during loading and unloading. Taken together, the RV700 series standard fit, locknut thumb screw, and dual-tooth engagement give installers a shelf and hang rod support that stays put once positioned in the standard.
The RV766 heavy-duty shelf bracket from Reeve Store Equipment Company sits in the Shelf, Closet & Garage Organization category, so it aligns with closet and storage layouts that rely on standards and brackets. Its typical use with the RV700 series standard means it is suited for vertical standard systems where multiple brackets support a continuous shelf and hang rod. With available lengths from 8 to 24 inches, the 18 inch size fits mid-to-deep shelf depths, which helps in closets where folded items on shelves sit above hanging garments on rods. The 1/8 inch thick tempered steel construction supports the design weight rating range of 675 to 1,325 pounds per pair, so the bracket helps carry substantial distributed loads when integrated into a properly designed shelving run using pairs of brackets at regular spacing.
The RV766 heavy-duty shelf bracket incorporates two engagement teeth that set into the RV700 series standard, and one tooth has an uphook design that positively captures the slot for additional stability. This tooth geometry assists with consistent seating from bracket to bracket, which supports level shelves across multiple bays. The bracket's locknut thumb screw is part of the standard configuration and tightens against the RV700 series standard, helping to reduce sway at the connection point when hang rods are active or when shelves are heavily loaded. The satin zinc Brillatone finish gives the bracket a uniform metallic surface that coordinates across the RV766 length range, supporting visual consistency in multi-section installations. Combined with the tempered steel body and defined weight rating per pair, these details help installers repeat bracket placement with predictable structural behavior in closet and garage organization projects.
The RV766 heavy-duty shelf bracket is typically used with the RV700 series standard, so its teeth and back profile are formed to engage that standard's slot pattern for stable support.
The RV766 shelf bracket uses a locknut thumb screw that tightens against the RV700 series standard, reducing bracket sway, which helps shelves and hang rods feel solid during everyday use.
The RV766 bracket has a weight rating of 675 to 1,325 pounds per pair, depending on length, indicating capacity for heavier storage loads when brackets are used as rated.
The RV766 bracket uses 1/8 inch thick tempered steel, giving the arm stiffness and strength so it resists bending, supporting shelving and hang rod loads over time.
The RV766 bracket has two engagement teeth, one with an uphook design, which helps the bracket seat securely in the RV700 series standard and resist upward pull-out forces.
The RV766 bracket uses a satin zinc Brillatone finish that gives a bright metallic look, helping coordinate with zinc standards and other closet hardware for a consistent appearance.
The 18 inch RV766 heavy-duty shelf and hang rod bracket from Reeve Store Equipment Company pairs with the RV700 series standard, giving closet and storage layouts a defined bracket-standard combination with high published weight ratings per pair. Its 1/8 inch thick tempered steel construction, dual engagement teeth with an uphook design, and integrated locknut thumb screw all work together to provide stable shelf and rod support in closet and garage organization projects. The satin zinc Brillatone finish keeps the bracket visually aligned with zinc standards and related components across a run. For projects that call for a defined 18 inch bracket within a coordinated RV766 series range, this model offers a consistent option to build out shelf and hang rod sections.
Sold In: 1 Each
