Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Heavy-duty shelf hang rod bracket describes the 20 inch RV766 bracket from Reeve Store Equipment Company, which supports shelving and hang rod applications where higher load capacity is needed. This bracket is part of the RV766 line and is typically used with the RV700 series standard, giving installers a matched component for standard-based shelving layouts. The bracket length is 20 inches, so it suits deeper shelves or closet sections that need more reach and storage depth. The material is 1/8 inch thick tempered steel, which provides a rigid support arm for demanding retail, closet, or storage runs. A satin zinc, also called Brillatone zinc, finish is applied, which offers a clean metallic look suitable for exposed standards and brackets in open installations. The manufacturer part number 766-20 clearly identifies this specific 20 inch size in the RV766 family for planning and reordering.
The Reeve RV766 model is typically used with the RV700 series standard, so its engagement teeth geometry is matched to that standard style for straightforward mounting. The weight rating of 675 to 1,325 pounds per pair, depending on length, means that when pairs are placed on RV700 series standards the shelf or hang rod system is designed to handle high static loads along the run. The locknut thumb screw is built into the bracket, and when tightened against the standard it reduces sway so the bracket resists rocking during stocking or daily use. The two engagement teeth, with one tooth incorporating an uphook design, work together to anchor the bracket securely into the standard slots and help keep the bracket seated during vertical or lateral loading on the shelving. The 20 inch length gives a defined projection that can be matched to shelf depth across a run.
The 20 inch RV766 heavy-duty shelf hang rod bracket from Reeve Store Equipment Company fits projects laid out around RV700 series standards, because it is typically used with that standard family. The 20 inch length aligns with deeper shelf layouts in closets, stockrooms, or retail fixtures where standard spacing is already set and a consistent projection is needed. The bracket belongs to a range that also covers 8, 10, 12, 14, 16, 18, 20, 22, and 24 inch lengths, so the 20 inch size can be combined with shorter or longer brackets from the same RV766 family on different levels while keeping a common engagement design. The high weight rating of 675 to 1,325 pounds per pair, depending on length, supports dense product storage or garment hanging along runs where brackets are set at regular intervals on RV700 series standards.
The two engagement teeth on the RV766 bracket, with one tooth using an uphook design, provide multiple contact points in the RV700 series standard slots, which helps maintain consistent bracket height and reduces the chance of uneven shelf lines along a wall run. The uphook tooth contributes additional stability and holding power, supporting repeatable positioning when multiple brackets of the same length are installed. The built-in locknut thumb screw is designed to reduce sway once tightened, which steadies the bracket under load and helps keep shelves and hang rods from shifting during stocking or day-to-day use. The 1/8 inch thick tempered steel construction supports the stated weight capacity and gives installers a predictable structural section when laying out heavy-duty applications. The satin zinc, or Brillatone zinc, finish presents a uniform appearance when multiple RV766 brackets and RV700 standards are installed in visible areas. The clearly defined 20 inch length and manufacturer part number 766-20 simplify specifying the same bracket on drawings and reordering matching parts during expansion or maintenance.
The Reeve RV766 766-20 bracket has a 20 inch length, which sets the shelf or hang rod projection and allows planning for deeper storage or closet sections.
The RV766 heavy-duty bracket has a weight rating of 675 to 1,325 pounds per pair based on length, providing capacity for demanding shelving or hang rod runs.
The RV766 bracket is typically used with the RV700 series standard, so its engagement teeth are designed to work with that style of upright standard.
The RV766 bracket is made from 1/8 inch thick tempered steel with a satin zinc, described as Brillatone zinc, finish for a uniform metallic appearance.
The RV766 bracket has a locknut thumb screw to reduce sway, which stabilizes the bracket on the standard so shelves and hang rods stay steadier under load.
The RV766 bracket uses two engagement teeth, and one tooth has an uphook design, adding stability and holding power to resist pull-out forces in service.
The 20 inch RV766 heavy-duty shelf hang rod bracket with locknut and satin zinc finish provides a defined 20 inch projection, high weight rating per pair, and a design tailored to RV700 series standards. The combination of 1/8 inch thick tempered steel, two engagement teeth with an uphook tooth, and a locknut thumb screw creates a bracket configured for heavy-duty shelving and hang rod layouts. For projects built around RV700 series standards that call for deeper shelves or higher capacity runs, selecting the Reeve RV766 766-20 bracket keeps the layout within a matched family and supports consistent performance across the installation.
Sold In: 1 Each
