extra heavy duty shelf brackets from Reeve Store Equipment Company provide a single slotted flanged bracket design that supports demanding shelving where strong, repeatable engagement with standards is required. The 723-C-16 bracket uses the Reeve Model RV723 profile, so it matches RV723 installations where a 16 inch length is needed. The SAP description identifies this part as a center bracket, heavy duty 16 foot, which distinguishes it from left and right flange types during layout. Material is .085 inch thick tempered steel, giving the bracket a solid, rigid body that resists bending under rated loads. Available lengths from 10 inch through 22 inch allow the same bracket family to be used across shallow to deeper shelves, so runs stay consistent. The available Brillatone zinc finish presents a bright plated surface that suits shop, closet, and garage organization environments where steel brackets are exposed.
The 723-C-16 bracket is identified in the web description as typically used with the RV700 series standard, so its two engagement teeth and stabilizer tooth are shaped for that standard profile. This matching interface guides the teeth into the single slotted uprights, then the stabilizer tooth reduces sway when shelves are loaded or bumped. The flange keyhole slots on the bracket face give a fixed pattern for mounting shelf material, allowing pilot locations to be repeated from shelf to shelf. Available lengths ranging from 10 inch to 22 inch let the same RV723 style layout serve different shelf depths while keeping alignment along the run. Using the center flange type within the three flange options supports bracket placement between uprights when designing multi-support shelves.
The product sits in the Shelf, Closet & Garage Organization category, under Shelf Brackets & Standards and the Shelf Standards & Brackets class, so it is suited to fixed shelf systems in those spaces. The web description states that Reeve Model RV723 is typically used with RV700 series standard, placing this bracket in Reeve vertical standard systems rather than free-standing uses. Available lengths of 10, 12, 14, 16, 18, 20, and 22 inches give installers shelf depth choices within one coordinated bracket line, which supports consistent hardware appearance across closets, garages, and shop walls. The center flange type described in the three flange types - left, right, and center - positions this specific 723-C-16 for use along the interior of a shelf span where a center support is needed between standards.
The weight rating of 230-520 lb per pair, based on length, ties load capacity directly to bracket size, so shorter brackets in this family support higher pair ratings than longer versions while sharing the same general construction. The material callout of .085 inch thick tempered steel means each bracket section is formed from relatively thick, tempered stock, which helps the pair meet the stated load range in shelf and closet installations. Two engagement teeth with a stabilizer tooth are designed to secure the bracket to the standard, so the teeth seat into the single slotted upright while the stabilizer tooth reduces side motion that can loosen loads over time. The Brillatone zinc finish gives the steel a plated surface appropriate for visible garage or closet shelving, tying into the Shelf, Closet & Garage Organization category where appearance and corrosion resistance both matter in day-to-day storage.
The 723-C-16 is an extra heavy duty single slotted flanged bracket in the Shelf Standards & Brackets class, so it is built for fixed shelf standards in storage layouts.
The Reeve Model RV723 bracket is typically used with the RV700 series standard, meaning its engagement teeth and stabilizer tooth are shaped for that standard profile.
The Reeve 723-C-16 is identified as a 16 inch length within the RV723 family, fitting shelf depths that match that projection in closet, shop, or garage runs.
The extra heavy duty shelf brackets have a weight rating of 230-520 lb per pair, based on length, so shorter brackets in the series support higher pair capacities.
The bracket is made from .085 inch thick tempered steel with an available Brillatone zinc finish, which provides a bright plated surface suited to exposed shelving.
The bracket has two engagement teeth and a stabilizer tooth to secure it to the standard, so the stabilizer tooth reduces sway during loading and everyday use.
The Extra Heavy Duty Shelf Brackets Single Slotted Flanged Brackets - Reeve Store Equipment Company 723-C-16 gives a center flange bracket in the RV723 line, matched to RV700 series standards and built from .085 inch thick tempered steel for heavy storage runs. With its 16 inch length, 230-520 lb per pair weight rating range for the family, and Brillatone zinc finish option, it fits garage, closet, and shop shelving that relies on standards and brackets. Use this center bracket where a defined RV723 interface and center support position are needed within a single slotted Reeve storage layout.
Sold In: 1 Each
