Amana 612841 Saw Blade For Solid Surfaces

Amana 612841 saw blade is a 12 inch diameter circular saw blade from the A.G.E. Series that is designed for general purpose cutoff work, giving installers one blade for common plastic laminate, plexiglass and solid surface jobs. The blade has a 1 inch arbor, so it mounts on saws with a matching 1 inch spindle, which keeps the blade running true during precise cutoff work. With 84 teeth, it is optimized for fine cutting, so plastic laminates and solid-surface materials are cut with a smooth edge. The blade uses a triple chip grind, so alternating flat and chamfered teeth break up the cut, which helps reduce chipping at the edges of laminate and solid surface panels. It is specified for double-sided plastic laminate, plexiglas up to 1/4 inch thick, and solid-surface brands such as Dupont Corian, Wilsonart Gilbralter, SSV and Fountainhead, giving shops coverage across typical surfacing materials.

Key Cutting Advantages For Installers

• The 12 inch diameter size supports cutting larger solid surface and laminate panels in a single pass, which helps maintain straight, square edges on countertop and panel sections.
• The 1 inch arbor interface centers the blade securely on compatible saws, which supports accurate tracking along fences and guides during cutoff operations.
• The 84 tooth count focuses the blade on general purpose cutoff, producing a clean edge in double-sided laminates and solid surfaces that is ready for further fitting or finishing.
• The triple chip grind tooth geometry is specified for these materials, so the teeth share cutting load and help limit edge damage in dense or brittle surfacing products.
• The 0 degree hook angle matches table saws and radial arm and similar machines, giving controlled feed and reducing self-feeding tendencies when cutting plastics and solid surfaces.

Installation And Saw Setup Details

This A.G.E. Series circular saw blade is built for use on table saws and radial arm and similar type machines, so it fits directly into common shop workflows for cutting countertop and panel components. The 1 inch arbor specification aligns with saws that use a 1 inch spindle, allowing the blade to be clamped firmly between flanges so it runs concentric for accurate cuts. Its 0 degree hook angle is matched to these saw types, so the teeth meet the work more neutrally, which helps maintain control when feeding double-sided plastic laminates, plexiglas up to 1/4 inch thick, and solid-surface sheets. With a 12 inch diameter and 84 teeth in a triple chip configuration, the blade is set up for controlled cutoff rather than rapid ripping, which suits trimming solid surface and laminate sections to final size.

Using This General Purpose Cutoff Blade Effectively

Where This A.G.E. Solid Surface Blade Excels

This A.G.E. Series 12 inch diameter blade is specified for cutting double-sided plastic laminate, so it serves well on laminate countertops, panels and components where both faces need clean edges. It is also specified for plexiglas up to 1/4 inch thick, so installers can cut clear or colored acrylic sheets within that thickness range for panels, guards or inserts. The solid-surface focus extends to brands such as Dupont Corian, Wilsonart Gilbralter, SSV and Fountainhead, so the blade can handle common solid-surface countertop blanks and backsplashes made from those materials. Being suitable for table saws and radial arm and similar type machines, it can stay on a primary shop saw used for sizing surfacing materials, which supports consistent results across repeated cuts in the same setup.

Details That Support Clean, Repeatable Cutoff Work

The general purpose cutoff designation reflects the 84 tooth count, which gives closely spaced teeth that remove smaller chips per tooth, helping to leave a smoother edge on plastic laminates and solid-surface materials. Its triple chip grind uses alternating chamfered and flat-topped teeth, which spreads cutting forces and helps protect more delicate laminate faces and plexiglas edges from chipping. The 0 degree hook angle keeps the blade from pulling aggressively into the work on table saws and radial arm and similar machines, so feed pressure stays manageable when trimming finished pieces. With the 1 inch arbor connecting this 12 inch blade securely to compatible saws, the cutting edge remains stable through the cut, supporting accurate miters, crosscuts and length trims in countertop and panel sections made from the specified laminates, plexiglas up to 1/4 inch thick, and solid-surface materials.

Common Questions About The 612841 Saw Blade

Selecting This Blade For Solid Surface Jobs

The Amana A.G.E. 12 inch diameter 612841 blade gives shops a general purpose cutoff option tailored to double-sided plastic laminate, plexiglas up to 1/4 inch thick, and named solid-surface materials, so one blade can cover frequent surfacing cuts. Its 84 tooth triple chip grind and 0 degree hook angle are configured for table saws and radial arm and similar machines used in countertop and panel fabrication, supporting smooth edges in those materials. Selecting this blade allows installers and fabricators to align saw setup with the specified laminates, plexiglass and solid-surface brands they work with on a daily basis.