Solid Surface Saw Blade For Clean Cuts

Solid surface saw blade describes this Amana A.G.E. 14 inch diameter blade with 1 inch arbor and 96 teeth, which is built to cut double-sided plastic laminate, plexiglass, and solid-surface materials, so one blade can handle common surfacing tasks. The 96 tooth count works with the specified materials to give a fine cutting action, which helps reduce chipping on plastic laminate faces during straight cuts. The blade is identified as Manufacturer Part 614961, so shops can match this exact configuration when they need consistent performance across multiple machines. The blade is part of the Circular Saw Blades product class, which fits typical expectations for table and radial arm saw work in woodworking environments. The A.G.E. Series branding ties this blade to Amana A.G.E. solid surface tooling, which supports shops that like to keep the same line for similar surfacing materials.

Key Blade Details That Support Precise Work

• The 14 inch diameter pairs with a 1 inch arbor, so the blade fits machines designed for that larger capacity and gives reach suited to wider solid-surface and laminate panels.
• The 96 tooth configuration is specified for cutting double-sided plastic laminate, plexiglass, and solid-surface materials, so the tooth geometry is tuned for those materials rather than general framing lumber.
• The blade is listed for double-sided plastic laminate, which supports work on decorative panels where both faces must stay clean during crosscuts and rips.
• The blade is described for plexiglass up to 1/4 inch thick, matching typical display and guard applications where edge quality helps reduce post-cut finishing.
• The solid-surface use covers materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, and Fountainhead, so shops working across multiple brands can rely on one blade style.

Mounting And Hook Angle For Shop Saws

The 1 inch arbor size on this 14 inch circular saw blade sets it up for table saws and radial arm and similar type machines that accept that bore, so installation follows standard large-blade mounting procedures. The blade is suitable for table saws and radial arm machines due to its 0 degree hook angle, which means the tooth face sits neutral to the workpiece and supports controlled feeding in those fixed-station setups. The 0 degree hook angle works with triple chip (TC) grind described in the application notes to manage solid-surface and plastics cutting, which matters when operators want reduced grabbing as the blade enters brittle or decorative materials.

Using This 14 Inch Blade In Real Jobs

Where This Solid Surface Saw Blade Excels

The Amana A.G.E. solid surface saw blade is described for cutting double-sided plastic laminate, so it fits cabinet and casework jobs where decorative laminate panels need clean edges on both sides during sizing. Application notes stating use on plexiglass up to 1/4 inch thick position this blade for display components, guards, and similar acrylic work, so shops can process sheet plastics on the same table or radial arm saw. The blade is specified for solid-surface materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, and Fountainhead, tying it directly to common countertop and surfacing brands used in fabrication shops. The 14 inch diameter works with the supported machines to give cut capacity suited to wider tops and large panels, which helps when handling long solid-surface strips or backsplash sections.

Details That Help Repeatable Cuts And Finishes

The 0 degree hook angle called out as the reason this blade suits table saws and radial arm and similar type machines affects how the teeth meet the work, supporting controlled feed on solid-surface and plastic laminate so operators can guide stock steadily. The triple chip (TC) grind referenced in the description works with the 96 tooth count to manage brittle surfaces like double-sided laminate and plexiglass, helping reduce edge fractures that would otherwise need extra finishing. Using a blade identified specifically for solid-surface materials such as Dupont Corian and Wilsonart means the tooth form and geometry are matched to those dense composites, which supports consistent edge quality from cut to cut. The defined 1 inch arbor and 14 inch diameter allow shops to standardize on this Manufacturer Part 614961 when they want the same cut behavior across several compatible stationary saws.

Common Questions About The 614961 Solid Surface Blade

Select This Blade For Solid-Surface Cutting Work

The Amana A.G.E. 14 inch diameter, 1 inch arbor, 96 tooth solid surface saw blade, part 614961, is described for cutting double-sided plastic laminate, plexiglass up to 1/4 inch thick, and solid-surface materials such as Dupont Corian and Wilsonart. Its 0 degree hook angle and triple chip grind are specified as suitable for table saws and radial arm and similar type machines, which supports controlled cutting of decorative and composite panels. For shops needing a defined, repeatable blade choice for these materials, this model aligns directly with the stated applications.