Amana A.G.E. 16" Diameter with 1" Arbor 108 Tooth M-TCG Solid Surface Saw Blade, 616109

Solid Surface Saw Blade For Precise Cutting

Solid surface saw blade describes this 16 inch diameter Amana A.G.E. Series circular saw blade built for engineered sheet goods. The blade is designed for cutting double-sided plastic laminate, plexiglass up to 1/4 inch thick, and solid-surface materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, and Fountainhead. The 108 tooth count works to deliver a fine cut on these materials, which helps keep solid-surface seams tight and laminate edges clean. The 1 inch arbor matches larger table and radial arm saw setups, supporting stable mounting during long rips and crosscuts. As part of the A.G.E. Series, this circular saw blade fits professional woodworking and surfacing workflows where consistent finish on solid-surface and laminate is critical.

Key Details That Support Clean Solid-Surface Cuts

• The 16 inch diameter provides reach and capacity for larger solid-surface and laminate panels, so full-depth cuts on typical countertop and panel sizes can be handled in one pass.
• The 108 tooth configuration is intended for fine cutting of double-sided plastic laminate and solid-surface materials, which helps reduce chipping at the laminate face and solid-surface edges.
• The blade is specified for plexiglass up to 1/4 inch thick, aligning tooth geometry to delicate plastics so edges stay smoother and require less sanding.
• The 1 inch arbor specification fits machines built for larger blades, giving a solid mount that supports accurate tracking on table and radial arm saws.
• The triple chip grind br tooth design is described for this blade, pairing well with 0 degree hook to manage hard solid-surface sheets with controlled feed and reduced tooth loading.
• The 0 degree hook angle is noted as suitable for table saws and radial arm and similar type machines, helping these saws cut solid-surface and laminate with a more neutral, controlled feed.

Installation And Fit On Table And Radial Arm Saws

This 16 inch diameter circular saw blade with 1 inch arbor is suited to table saws and radial arm and similar type machines, which means it is sized for saws designed to run larger blades on a 1 inch shaft. The stated 0 degree hook angle is specifically called out as suitable for these machines, so feed forces stay more neutral on both push-through table saw cuts and pull-type radial arm cuts. The combination of diameter, arbor size, and hook angle lets installers put the blade into solid-surface and laminate cutting service on shop saws already configured for 1 inch arbor blades.

Using The Blade On Solid-Surface And Laminate Jobs

Where This Solid Surface Saw Blade Excels

This solid surface saw blade is described for cutting double-sided plastic laminate, plexiglass up to 1/4 inch thick, and solid-surface materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, and Fountainhead. On laminate work, that scope covers panel sizing and edge trimming cuts on double-sided plastic laminate sheets where both faces need a clean finish. On solid-surface materials, the description points to brands commonly used for countertops and surfacing, so the blade fits cutting tops, splash pieces, and build-up strips from full sheets. When used on plexiglass up to 1/4 inch thick, the specified capability lets shops process display panels and protective screens that fall within that thickness without changing to a different blade.

Details That Support Consistent Cutting Results

The 108 tooth count on this 16 inch diameter blade is specified for these engineered materials, so the tooth density works with the triple chip grind br geometry to produce a fine, controlled cut. That configuration matters on brittle laminates and solid-surface sheets because the cutting action tends to leave a smoother edge that requires less secondary finishing. The 0 degree hook angle referenced in the application notes is important on table saws and radial arm and similar type machines, since a neutral hook reduces self-feeding tendencies on these saw types when cutting dense solid-surface or laminate. The 1 inch arbor supports secure mounting on professional machines built for larger blades, which helps keep the blade running true during long cuts in full-size solid-surface and laminate panels.

Common Questions About This Solid Surface Saw Blade

Choose This Blade For Solid-Surface And Laminate Work

This Amana A.G.E. Series 16 inch diameter, 108 tooth circular saw blade with 1 inch arbor is described for cutting double-sided plastic laminate, plexiglass up to 1/4 inch thick, and solid-surface materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, and Fountainhead. The stated 0 degree hook angle and triple chip grind br suit table saws and radial arm and similar type machines processing these sheet goods. For shops working regularly with solid-surface and laminate, this defined combination of diameter, tooth count, hook angle, and material scope offers a targeted blade choice.