10 Inch Solid Surface Saw Blade For Precise Cuts

10 inch solid surface saw blade describes this A.G.E. Series circular saw blade designed for solid-surface and plastic-laminate work on table saws and radial arm machines. The 10 inch diameter establishes a familiar size for shop setups, so it fits common cutting stations without changing cutting habits. The 30mm arbor centers the blade securely on machines built for metric arbors, which stabilizes the blade during cuts. The 72 tooth count works with the solid-surface grind to create a fine cutting action, which supports smooth edges on finished parts. The blade is described for cutting double-sided plastic laminate, so it serves well on decorative panels used in cabinetry and fixtures. It is also described for cutting plexiglass up to 1/4 inch thick, giving installers one blade option for both sheet acrylic and solid-surface components.

Key Blade Details That Support Clean Results

• The 72 tooth configuration spreads the cutting load across many teeth, which helps produce smoother edges on double-sided plastic laminate surfaces during straight or cross cuts.
• The blade is described for cutting solid-surface materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, Fountainhead, so one setup can handle popular solid-surface brands in countertop and panel fabrication.
• The blade is listed for plexiglas up to 1/4 inch thick, so the tooth geometry supports controlled cuts in thinner acrylic panels used for doors, guards, or decorative elements.
• The circular saw blade belongs to the A.G.E. Series, so it aligns with the Amana A.G.E. naming and helps shops match this blade with other blades from the same family when standardizing tooling.
• The manufacturer part number 610721-30 identifies this exact 10 inch, 72 tooth, 30mm arbor solid surface blade, which simplifies reordering when a specific cut quality on laminate and solid-surface work has been proven in the shop.

Installation Fit For Table And Radial Arm Saws

The blade is described as suitable for table saws and radial arm and similar type machines, so it is intended to mount on stationary shop equipment rather than handheld tools. The 30mm arbor dimension defines the bore size the machine must support, which guides blade selection for metric-arbor saws. The 10 inch diameter works within the capacity range commonly found on cabinet shop table saws and radial arm saws, which helps maintain familiar cutting heights and fence positions. The 0 degree hook angle specified for this blade shapes how the teeth meet the material, supporting controlled feed on machines where the workpiece is pushed or pulled through a fixed blade path.

How This Solid Surface Blade Works In The Shop

Where This 10 Inch 72 Tooth Saw Blade Is Used

This circular saw blade is identified as a solid-surface saw blade for cutting double-sided plastic laminate, so it fits directly into countertop, cabinet, and fixture fabrication where laminated panels are common. The description also lists solid-surface materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, and Fountainhead, so it covers a range of branded sheet goods used for tops, work surfaces, and architectural elements. The blade is further specified for plexiglas up to 1/4 inch thick, which places it in workflows that combine solid-surface parts with thin acrylic faces, guards, or display components. Being in the Table and Radial Arm saw blade category aligns it with machines already used for panel processing, which helps keep solid-surface and laminate operations on familiar equipment.

Details That Support Repeatable Solid Surface Cutting

The description notes a triple chip (TC) grind, which alternates chamfered and flat teeth along the edge, distributing cutting forces across the tooth pattern to manage dense solid-surface and laminate layers. This triple chip geometry interacts with the 72 tooth count to create small, controlled chips, supporting edge quality on decorative faces. The blade is further described as having a 0 degree hook angle, so the teeth meet the work more neutrally, which helps moderate feed tendencies on table saws and radial arm saws when cutting solid-surface sheets or laminate-faced panels. The 10 inch to 12 inch 0 degree hook reference shows this grind and hook concept applies within that diameter range, and this specific blade sits at the 10 inch end, which suits many cabinet shop saws. The combination of solid-surface focus, triple chip grind, and 0 degree hook angle works together to manage both laminate and solid-surface edges without aggressive self-feeding, supporting steady passes in production or installation trimming.

Common Questions About This Solid Surface Saw Blade

Choose This Blade For Solid Surface Panel Work

This A.G.E. Series 10 inch diameter blade with 30mm arbor and 72 teeth is identified specifically for double-sided plastic laminate, plexiglas up to 1/4 inch, and solid-surface materials such as Dupont Corian, Wilsonart, Gilbralter and SSV, and Fountainhead. The 0 degree hook angle, triple chip grind, and suitability for table saws and radial arm and similar type machines support controlled cutting on the stationary equipment already in many woodworking and fabrication shops. When a job combines laminate-faced panels, solid-surface sheets, and thin acrylic, this blade provides a single part number, 610721-30, that addresses that described material range.