Undermount 450 lb Ball Bearing Slides Full Extension Pantry Pull-Out Slides White 24" Length - 1 Set

Undermount 450 Lb Ball Bearing Slides For Pantry Use

Undermount 450 lb ball bearing slides define these Fulterer USA, Inc. pantry drawer slides as a heavy-duty undermount solution for pantry pull-out applications. Full extension movement lets the pantry pull-out travel the entire slide length, so the 24 inch depth can be used across its full range. The pantry drawer slides in this 7704 series design sit in the undermount position, which keeps the sides of the pantry pull-out clear for uninterrupted storage surfaces. The pantry drawer slides belong to the Pantry Drawer Slides product class, so they are intended for pantry-style pull-out structures rather than small utility drawers. The 4-51/64 inch height gives the slide a tall profile, which supports the pantry pull-out along a larger vertical area. A white available finish allows the undermount slides to visually match white pantry carcasses or blend into light cabinet interiors.

Key Pantry Slide Details For Real-World Projects

• The full extension design lets the pull-out travel the full 24 inch slide length, so the pantry contents can be reached from the front without leaving items hidden at the back during everyday use.
• The undermount configuration supports the pantry pull-out from beneath, which leaves the sides clear and helps preserve a clean interior appearance while still carrying pantry loads.
• The 450 lb reference in the name identifies these slides as suited to heavier pantry pull-out structures, which supports robust pantry frames that often carry dense stored items.
• The 4-51/64 inch slide height creates a tall bearing structure along the cabinet side, which spreads support over more vertical area on the pantry pull-out frame.
• The white finish option lets the slides visually coordinate with white cabinetry, which keeps hardware from standing out when the pantry pull-out is opened.
• The Fulterer USA, Inc. 7704 designation ties the slides to a specific manufacturer part number, which aids repeat ordering when multiple pantry units use the same undermount system.

Installation Details For 7704 Undermount Pantry Slides

The 32 mm pattern reference describes a mounting pattern aligned to 32 mm system boring, which allows these pantry drawer slides to integrate into cabinet sides laid out on that system. Side clearance of 3/4 inch defines the lateral spacing between the pantry pull-out and cabinet wall, which sets the build dimension for the pull-out frame width. Vertical tilt adjustment is built into the design, allowing the pantry pull-out to be tilted within the slide hardware to fine-tune how the front aligns relative to the cabinet. A top adapter plate for wood in steel frames is part of the feature set, so wood elements can connect at the top into steel frame structures used in pantry pull-outs. Recommended fasteners are #8 x 7/16 inch Phillips pan head screws labeled as WW46000, which gives an exact screw style and length that suits the slide mounting points.

Using Fulterer 7704 Slides In Pantry Pull-Out Work

Where These Pantry Drawer Slides Are Applied

The pantry drawer slides in this 7704 series are identified as Pantry Drawer Slides, placing them firmly in tall pantry pull-out work rather than short drawer projects. The 24 inch length suits pantry cabinets built around that internal depth, so the slide travel matches the cabinet carcase size. The undermount layout keeps the slide hardware below the pull-out, which is common in pantry towers where visible side hardware is not desired. Side clearance of 3/4 inch sets the structural relationship between the pantry pull-out frame and the cabinet interior, so frames can be sized to move freely without lateral rub. The 4-51/64 inch height creates a relatively tall slide component, which is suited to taller pantry frames that benefit from broad vertical guidance as they move.

Details That Support Accurate Fit And Alignment

The vertical tilt adjustment feature gives the installer a way to adjust the angle of the pantry pull-out front relative to the cabinet, which is important for getting a flush, even front line when multiple pantry or drawer fronts share the same elevation. The 32 mm pattern allows mounting holes to line up with 32 mm system boring, which simplifies placement in cabinet sides drilled on that standard. Full extension travel means the 24 inch slide opens fully, so clearances at the front of the cabinet can be planned knowing the pantry pull-out will project to its full length. The white finish option allows these undermount pantry slides to visually coordinate with white pantry frames, which keeps the hardware visually quiet when the unit is extended. The Fulterer USA, Inc. manufacturer designation and 7704 part number together identify a consistent slide geometry, which is useful when building multiple pantry units that must operate and align the same way.

Common Questions About 7704 Pantry Drawer Slides

Selecting These Slides For Pantry Pull-Out Builds

The combination of undermount layout, full extension, and the Pantry Drawer Slides product class positions the Fulterer USA, Inc. 7704 slides as a focused solution for pantry pull-out projects. The 24 inch length, 3/4 inch side clearance, and 4-51/64 inch height define the cabinet and frame dimensions that pair correctly with this hardware. Vertical tilt adjustment and the 32 mm pattern give the installer tools to fine-tune alignment and integrate with system-bored cabinet sides. The white finish option ties into light cabinet interiors, supporting visually consistent pantry installations. For pantry pull-outs built around these dimensions and mounting details, selecting the 7704 undermount 450 lb ball bearing slides connects the project directly to a defined Fulterer slide platform.