
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Fulterer pantry pull-out slides provide an undermount slide solution for tall pantry projects where smooth extension and stability are required. The pantry drawer slides design supports pull-out storage in cabinet applications that benefit from full-length slide support along the pantry height. A 44 inch length gives coverage for tall cabinet interiors, so the pull-out structure remains guided over a long travel distance during opening and closing. The 441 lbs loading reference signals a heavy-duty pantry slide class, so the system suits substantial pantry frameworks built to handle significant stored weight. Top and floor mounting points tie the pull-out framing to both cabinet ceiling and base, which distributes forces through the cabinet structure during operation. Pure white powder coated surfaces present a clean, uniform appearance that coordinates well in light interior cabinet designs where slide visibility matters when the pantry is open.
The patented slide-on system used with these Fulterer pantry pull-out slides enables a quick and easy installation approach, so the pantry frame engages the undermount runners through a defined slide-on connection rather than loose alignment steps. Integrated lateral and height adjustment features within the slide system provide built-in fine tuning capability, so the installed pantry frame can be shifted side-to-side and vertically to correct small cabinet variances after mounting. Recommended maximal cabinet height of 2,500 mm, or 98.43 in., defines an upper project size for which these slides are suited, guiding cabinet design when planning tall pantry cases. A recommended maximum cabinet width of 600 mm, or 23.62 in., gives a target span for the pull-out frame, which supports predictable slide performance by keeping the structure within a width suited to the slide geometry.
These pantry drawer slides are aimed at tall pantry cabinet applications where a 44 inch slide length aligns with the cabinet interior height. With a recommended maximal cabinet height of 2,500 mm, or 98.43 in., the system suits full-height pantry runs that approach standard room heights. The recommended maximum cabinet width of 600 mm, or 23.62 in., focuses use on relatively narrow, deep pantry frames, which matches common tall pantry proportions in kitchen and utility cabinetry. Because the slides mount at both the top and floor, they are applied in cases where a fixed cabinet ceiling and base are present to receive those mounting points. The undermount classification positions them in projects where side walls of the pull-out are reserved for storage design rather than side-mounted slide hardware.
The no deflection in fully extended position statement indicates the slide system is designed so the pantry frame remains supported at full travel, which matters when heavy contents are stored near the front of the pull-out and operational feel must remain consistent. The top and floor mounting approach helps counter tipping forces by anchoring the pull-out at both ends, supporting a stable motion path even under the 441 lbs load reference. Integrated lateral and height adjustment make it possible to correct small racking or reveal issues after the pantry is hung, which reduces rework when cabinets or floors introduce minor dimensional variation. The pure white powder coated finish not only defines appearance but also presents a consistent surface along visible slide sections, which is important when pantry sides leave the runners partly exposed. The Easy Close Device FR 777A ECD can be ordered optionally under Item No. 7719, so projects that call for a soft-closing experience can pair this device with the pantry slide system for a closing feel that matches higher-end pantry expectations.
The Fulterer pantry pull-out slides are recommended for cabinet heights up to 2,500 mm (98.43 in.) and cabinet widths up to 600 mm (23.62 in.), aligning the slide geometry with tall, relatively narrow pantry cases.
The pantry drawer slides mount at both the top and floor of the cabinet, tying the pull-out structure into the cabinet ceiling and base so forces are transferred through the full cabinet height.
No deflection in fully extended position means the slide system is designed so the pantry frame stays supported at full travel, which helps maintain alignment when the pull-out is loaded.
The patented slide-on system connects the pantry frame to the runners through a defined slide-on action, which simplifies positioning steps during installation in tall cabinets.
The Fulterer 7713 pantry slides provide integrated lateral and height adjustment, allowing side-to-side and vertical fine tuning so the pull-out aligns with cabinet fronts and reveals.
The pantry pull-out slides can pair with the Easy Close Device FR 777A ECD, referenced as Item No. 7719, adding an easy-close function to the pantry motion.
The Fulterer USA, Inc. pantry pull-out slides with 44 inch length, undermount design, and top and floor mounting give a defined framework for tall pantry construction. Using the recommended cabinet height and width as design targets aligns the pantry structure with the slide system capabilities. The patented slide-on installation method and integrated lateral and height adjustment support efficient fitting work when hanging and aligning the pull-out. For cabinet shops and serious DIY builders planning heavy-capacity tall storage, these pantry drawer slides provide a clear specification path when selecting slides for a stable, full-height pantry project.
Sold In: 1 Set