Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer FR 777A is a 34 inch pantry pull-out slide finished in Pure White powder coat, rated 441 lb per pair on full-extension ball bearings. It mounts at both the floor and the top of the cabinet opening, making it the right slide for tall pantry and utility pull-out installations that carry real weight.
Pantry pull-outs are a different job than kitchen drawers. The load is taller, heavier, and more front-heavy — canned goods, oil bottles, small appliances — and the pull-out frame has to stay straight under that weight through thousands of cycles. The FR 777A addresses this by mounting at two points: the floor of the cabinet and the top rail. That top-and-floor geometry keeps the pull-out from racking forward as it opens, which is exactly the failure mode that standard side-mount slides experience in tall applications. The 441 lb capacity means you are not managing a weight budget when loading the shelves; the slide handles a fully stocked unit without complaint.
The Pure White powder coat is baked onto the steel members, giving the slide a surface that holds up to the repeated contact that happens in a busy pantry. Because the slide is visible in use on a tall pull-out, the finish matters more here than on a concealed undermount — the white coat keeps the hardware visually quiet against white melamine or painted interiors. Underneath the finish, steel construction and ball bearings in formed raceways carry the load; no plastic rollers, no ramp close, just a free-sliding steel mechanism built for the capacity it is rated to.
Cabinet shops building pantry units for residential kitchens are the core buyer. A 34 inch slide length suits deep base pantry cabinets and full-height pantry towers where the pull-out needs support at both ends of its travel. The Pure White finish pairs naturally with white-box production runs — no finish mismatch to manage. Designers and contractors specifying pantry hardware for heavy-use kitchens will find the 441 lb rating gives a real margin of safety compared to standard drawer slides pressed into pantry service. The standard motion means no soft-close mechanism to service or replace; the pull-out stays where it is left, open or closed.
Per pair. Load ratings in this product class are stated for the installed pair of slides, not per individual member.
Tall pantry pull-outs generate significant forward torque when loaded and extended. Top-and-floor mounting distributes that force across the full height of the cabinet opening, keeping the pull-out tracking straight. Side mounting alone cannot provide the same resistance against racking on a tall, heavy unit.
Not on this model. The FR 777A uses standard motion — no damper or self-close mechanism. The pull-out stays wherever it is left. If a damped close is required, look for a soft-close pantry slide configuration in the FR series.
Slide length and actual drawer travel are separate numbers. This is a full-extension slide, so the pull-out travels approximately the full 34 inches — but confirm your cabinet's interior depth provides clearance behind the slide before ordering.
Verify the sold-as unit on the product listing — pantry slides in this series may be sold as a set or as individual members. Confirm the quantity before adding to your order to avoid a short shipment.
When the pantry unit is tall, the load is heavy, and the finish has to match white cabinetry, the FR 777A 34 inch in Pure White is the direct answer — 441 lb of rated capacity, full extension, and top-and-floor support in a finish that disappears into the cabinet interior.
Sold In: 1 Set
