Fulterer 28" Bottom Mount/Top Mount Full Extension 450 lb Pantry Drawer Slide, White, 7706

450 lb Capacity And Full-Extension Access for Serious Pantry Pull-Outs

The Fulterer 7706 is a full-extension ball-bearing pantry pull-out slide built for loads that would overwhelm a standard undermount drawer slide. At 28 inches long and rated 450 lb per set, it is sized for the deep, heavily stocked pantry cabinets where capacity and reach matter most. Sold as one complete set.

Key Features

• 450 lb weight capacity per set — handles the full weight of a loaded pantry pull-out, from canned goods to small appliances.
• Full extension — the entire pull-out travels out to the cabinet face, so nothing stays buried at the back.
• Ball-bearing construction — hardened steel bearings carry heavy loads smoothly through years of daily cycles.
• Dual mounting positions — installs at the bottom and top of the pull-out box, giving the frame the support a 450 lb load demands.
• White powder-coat finish — blends with white melamine and painted cabinet interiors.
• 28 inch slide length — matched to standard full-depth pantry base cabinets.

Where This Slide Earns Its Place

Standard kitchen drawer slides top out at 90 to 110 lb per pair — a fraction of what a fully stocked pantry pull-out actually weighs. Canned goods, bulk dry goods, and heavy appliances stored in a tall pantry base can push the load well past 200 lb, and that load must cycle reliably every time someone reaches for dinner. The Fulterer 7706 addresses that gap with a 450 lb per-set rating on a full-extension, ball-bearing mechanism that brings the entire pull-out to the cabinet face. Nothing stays out of reach at the back of a 28 inch deep pantry box.

The dual mounting position — both bottom and top of the pull-out carcase — is the engineering answer to torsion and racking under heavy, off-center loads. A single bottom-mounted slide pair would flex under that kind of weight; the top and bottom rail combination distributes the load across the full height of the pull-out frame.

Construction Built for the Weight

Steel members with hardened ball bearings carry the load through the full travel cycle without the shimmy or hesitation that nylon rollers show under heavy loads. The white powder-coat finish holds up in the interior of a pantry cabinet where the hardware will be handled frequently and loaded hard. Because this is a standard-motion slide — no soft-close or self-close mechanism — the pull-out travels freely and stays where it is positioned, which suits pantry configurations where the user needs both hands free to load or unload shelves.

Who Specifies This Slide

Cabinet shops building tall pantry base units for kitchens that do serious cooking and storage work. Contractors retrofitting existing pantry cabinets with pull-out systems that need to carry a real load over years of use. Designers specifying hardware for clients who treat the pantry as a working storage system, not just a cosmetic feature. The 3/4 inch side clearance per side means the pull-out box must be sized accordingly — plan the box width from the cabinet opening using that clearance on each side.

Frequently Asked Questions

The Right Slide for a Pull-Out That Works Hard

When the pantry cabinet needs to carry a full load and open completely, the Fulterer 7706 provides the capacity and full-extension travel to make that happen reliably, one set per pull-out.