Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer FR 777A is a 38 inch full-extension ball bearing pantry pull-out slide set rated 441 lb, designed for pantry cabinets and tall pull-out applications where a standard drawer slide simply cannot carry the load. This set mounts at both the top and bottom of the pull-out assembly for the dual-rail stability that deep, heavily loaded pantry units require.
Pantry pull-outs are a different problem than a kitchen drawer. The cabinet is tall, the load is spread across multiple shelves, and the weight adds up fast once cans, bottles, and dry goods fill the unit. A standard 75 to 100 lb undermount or side-mount slide is not rated for this work. The FR 777A is engineered as a pantry-specific slide, with a 441 lb capacity and a dual-mount design that distributes that load across both the top and bottom rails rather than relying on a single pair of slides to manage the full depth and height of the pull-out. The result is a pull-out that opens smoothly and holds its alignment even when loaded unevenly.
The FR 777A runs on steel ball bearings for consistent, smooth travel across the full 38 inch extension. The steel members carry a white finish suited to painted interiors and white melamine casework, keeping the slide visually clean inside the cabinet. Motion is standard, meaning no soft-close or self-close mechanism — the pull-out stays wherever it is positioned, which suits pantry applications where a damped close could work against how a loaded pull-out is used.
Cabinet shops building tall pantry pull-outs, residential designers specifying high-capacity storage, and contractors retrofitting pantry units will all reach for this slide when the load count climbs past what standard hardware covers. The 38 inch length and white finish narrow the fit to deep painted or white-interior pantry cabinets specifically — for shorter cabinets, shallower pull-outs, or unpainted interiors, other lengths and finishes in the FR 777A family are the right call.
This is sold as one set, which includes the top-mount and bottom-mount slides needed to outfit one pantry pull-out unit.
Yes — the FR 777A is designed to mount at both the top and bottom of the pull-out tower. That dual-rail approach is what gives this slide its stability under tall, heavily loaded assemblies. Single-rail installation is not the intended use for this product.
This SKU uses standard motion — no damper or closing mechanism. If a damped close is a project requirement, check the FR 777A series for other motion variants, or confirm with your sales contact whether a soft-close configuration is available in this length.
The FR 777A mounts at the top and bottom of the pull-out, and the specific rear-support hardware required depends on the cabinet construction. In a face-frame build, confirm that the mounting locations at the top and bottom of the cabinet provide solid attachment points for the slide's rear ends before ordering.
When the pantry pull-out needs to carry real weight across a full 38 inches of travel, the FR 777A's 441 lb capacity and dual-rail design handle the job that standard kitchen hardware was never built for.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW46000 Mfr# 3670000235961 1000 | Würth #8 x 7/16" Truss Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000235961 1000 - 1000/Box |
