KV8419 16" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8419P 16
Description
Knape And Vogt 16 Inch Drawer Slides For Smooth Travel
Knape and Vogt 16 inch drawer slides give you a side mount, ball bearing slide in the 8419 series that supports self closing action, so drawers pull in firmly at the end of travel for a controlled, finished feel on every use. The 1 inch overtravel lets the drawer extend beyond the cabinet front, improving access to the back of the drawer, which helps during loading and selection in deeper cabinet applications. An unhanded, side mount design means the same 8419P 16 slide works on either side, simplifying layout and keeping left and right installations consistent across a run. The slide height of 1-13/16 inches keeps the profile compact while still providing the internal ball bearing mechanism, which matters when fitting between fixed shelves or within narrow cabinet sides.
Key 8419P 16 Details That Support Daily Use
- The 1 inch overtravel allows the drawer to move past the cabinet face, which improves reach to stored items and reduces interference when accessing the back of the drawer cavity.
- The self closing feature draws the drawer closed at the end of travel, helping the front settle against the face and reducing partially open drawer positions in regular use.
- The 1/2 inch side clearance, plus 1/32 inch minus 0 inch each side, provides a defined fit window so cabinet and drawer widths can be sized accurately for consistent slide performance.
- The 32 mm pattern on the slide aligns with 32 mm system boring, which speeds installation in cabinets drilled on that system and supports repeatable mounting hole locations.
- The lever disconnect allows the drawer member to be separated from the cabinet member, which simplifies drawer removal for installation, adjustment, or service work.
- The ball retainer latch and polymer stop cushions stabilize the ball bearings and soften end travel, which supports smoother motion and reduced impact when opening and closing.
Side Mount Slide Fit, Clearance, And Fastener Setup
This side mount drawer slide is designed for a side clearance of 1/2 inch, plus 1/32 inch minus 0 inch on each side, giving a precise dimension for sizing drawers relative to the cabinet opening so the ball bearing members run properly under load. A slide height of 1-13/16 inches provides a known profile to work around fixed shelves or roll-out stacks during layout. Recommended fasteners are #7 x 1/2 inch Phillips pan head screws (WW44190), which match the mounting holes and help seat the slide securely against the cabinet side and drawer side for stable operation in service.
Using KV 8419 Slides In Cabinet Installations
Where These Side Mount Drawer Slides Are Applied
The KV Model 8419 16 inch slide is a side mount, ball bearing slide used in drawer and pull-out applications where 1 inch overtravel is beneficial, such as deeper cabinet storage where back access is important. Its unhanded design means the same member can be placed on either the left or right side of the drawer, which streamlines installation across multiple openings. The 32 mm pattern supports cabinets drilled on the 32 mm system, allowing installers to align the slides directly to existing holes and keep vertical spacing uniform. A slide height of 1-13/16 inches gives enough structure for the ball bearing mechanism while still fitting in common frameless and face-frame cabinet layouts that rely on limited side space.
Details That Help With Repeatable Drawer Performance
The 1 inch overtravel in the 8419 series lets the drawer clear the cabinet front, which keeps the back of the box visible and reduces reaching around the face frame or door plane during use. Self closing action brings the drawer fully home at the end of travel, which helps fronts line up along a bank of drawers and limits drift from vibration. The ball retainer latch keeps the bearings captured in position, supporting smoother movement over the life of the installation. Polymer stop cushions soften contact at travel limits, which reduces noise and impact when drawers are closed or fully opened. The Anochromek finish gives the slide a uniform coated surface, which supports consistent movement along the ball bearing races and presents a clean, finished appearance inside the cabinet.
Common Questions About 8419P 16 Drawer Slides
What slide length and model are these KV 8419 slides?
The KV 8419P 16 slide is a 16 inch length side mount ball bearing drawer slide, which sets the drawer travel distance and matches cabinets designed around that nominal depth.
How much overtravel do these drawer slides provide?
The 8419 series provides 1 inch overtravel, allowing the drawer to extend beyond the cabinet face so the rear of the drawer can be reached more easily.
What side clearance is required for the 8419P 16 slide?
The 8419P 16 slide uses 1/2 inch side clearance, plus 1/32 inch minus 0 inch on each side, which guides cabinet and drawer width sizing for proper fit.
How does the self closing feature affect drawer operation?
The self closing feature on the 8419 series pulls the drawer closed at the end of travel, helping fronts sit flush and reducing partially open positions in normal use.
What mounting pattern do these KV drawer slides use?
The 8419P 16 slide uses a 32 mm pattern, which aligns with 32 mm system boring so slides can mount to pre-drilled cabinet holes in that system.
Which screws are recommended for installing these slides?
The 8419P 16 slide is recommended to be installed with #7 x 1/2 inch Phillips pan head screws (WW44190), matching the hole design for secure side mounting.
Selecting KV 8419 Slides For Your Next Cabinet Run
The KV 8419P 16 side mount ball bearing slide combines 16 inch length, 1 inch overtravel, and self closing action, giving you defined travel and reliable closure in drawer installations. The 1/2 inch side clearance with a plus 1/32 inch minus 0 inch tolerance and 32 mm pattern support consistent casework sizing and straightforward mounting in system-drilled cabinets. An unhanded design, lever disconnect, ball retainer latch, polymer stop cushions, and Anochromek finish all work together to support smooth drawer operation on new builds or upgrades across a bank of cabinets.
