
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 26 inch drawer slides in the 8419 Series are side mount, ball bearing slides with 1 inch overtravel and self closing action, so drawers extend past the cabinet face while still pulling themselves shut for a controlled close. The slides are classified as side mount drawer slides, so they sit on the cabinet sides and support drawers along the length for straightforward layout in new cabinets or retrofits. An unhanded design means each slide can be used on either side of the drawer, simplifying layout and reducing sorting on the bench. The ball bearing construction supports smooth travel along the full 26 inch length, which helps keep movement consistent under normal drawer loads. A height of 1-13/16 inches gives a defined profile to work with when planning drawer box dimensions and clearances within the opening.
The KV Model 8419 slide is a side mount design with a specified side clearance of 1/2 inch plus 1/32 inch, minus 0 on each side, so drawer box widths can be sized accurately to fit the cabinet opening. This defined clearance helps installers set predictable gaps between the drawer and cabinet sides, which supports smoother operation when both slides share the same spacing. The slide height of 1-13/16 inches provides a fixed vertical envelope along the drawer side, assisting with rail placement and notch layouts where needed. A 32 mm pattern is provided, so mounting holes follow a regular system that aligns well with drilling setups based on the 32 mm system. The manufacturer recommends #7 x 1/2 inch Phillips pan head fasteners, giving a specific screw size and head style to match the mounting slots and holes.
The Knape and Vogt 8419P 26 slide, with its 26 inch length, suits drawers that require a full-depth extension plus 1 inch overtravel, so the back of the drawer clears the cabinet face for better reach. The side mount configuration fits cabinets where there is a defined 1/2 inch plus 1/32 inch, minus 0 space per side, allowing installers to size drawer boxes to a clear formula based on the opening. The 32 mm pattern aligns with cabinet systems laid out on that grid, which is common in many shop-built and modular cabinet constructions. An anochromek finish on the slides provides a consistent surface treatment over the slide members, offering a uniform appearance inside the cabinet and a treated surface along the working parts.
The 1 inch overtravel on the KV Model 8419 slide lets the drawer extend beyond the cabinet front, so hardware at the back of the drawer or stored items are less obstructed by the face frame or edge. Self closing action near the end of travel helps draw the slide into its fully seated position, which supports a consistent front alignment once the slide is mounted square. Ball bearing construction along the slide path supports smooth movement across the 26 inch length, which can reduce drag as drawers are opened and closed in regular use. The lever disconnect aids in separating the drawer from the cabinet member, making it easier to handle heavy or finished drawers during fitting or finishing steps. Polymer stop cushions in the slide absorb part of the energy as the drawer reaches closed position, reducing direct metal contact at the stop. The ball retainer latch helps keep the bearing elements in position, supporting repeatable slide engagement cycle after cycle in typical cabinet service.
The KV 8419P 26 is a side mount, ball bearing drawer slide with self closing action, so it supports the drawer from the cabinet sides while providing smooth movement and pull-in at the end of travel.
The 8419 Series slide provides 1 inch overtravel, allowing the drawer to extend beyond the cabinet front so the rear of the drawer is easier to access during use.
The KV Model 8419 requires 1/2 inch plus 1/32 inch, minus 0 clearance on each side, guiding drawer box width calculations relative to the cabinet opening.
The 8419P 26 slides are unhanded, so each slide can be used on either the left or right side, which simplifies layout and stocking for installers.
The 8419 slides use a 32 mm pattern, aligning with drilling systems based on 32 mm spacing and supporting consistent hole placement on cabinet sides.
The recommended fasteners are #7 x 1/2 inch Phillips pan head screws, which match the slide mounting holes and provide a defined screw size for installation.
The Knape and Vogt 26 inch drawer slides in the 8419 Series combine side mount installation, ball bearing movement, 1 inch overtravel, and self closing action, so they address access and closing control in cabinet drawers. The defined 1/2 inch plus 1/32 inch, minus 0 side clearance, 1-13/16 inch height, and 32 mm pattern give installers clear dimensions and hole locations for planning drawer construction. When a project calls for 26 inch side mount ball bearing slides with these characteristics, the 8419P 26 format from Wurth Baer Supply offers a focused option ready for integration into shop or field workflows.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | KV8419P-14 Mfr# 8419P 14 | KV8419 14" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8419P 14 | ||||
Sold in: 1 Set | KV8419P-22 Mfr# 8419P 22 | KV8419 22" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8419P 22 | ||||
Sold in: 1 Set | KV8419P-18 Mfr# 8419P 18 | KV8419 18" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8419P 18 | ||||
Sold in: 1 Set | KV8419P-16 Mfr# 8419P 16 | KV8419 16" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8419P 16 | ||||
Sold in: 1 Set | KV8419P-24 Mfr# 8419P 24 | KV8419 24" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8419P 24 | ||||
Sold in: 1 Set | KV8419P-20 Mfr# 8419P 20 | KV8419 20" Over Travel Self-Close Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8419P 20 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8404-B Mfr# 8404B | Face Frame Bracket for 8400 Slides, Front-Mount, Zinc | ||||
Sold in: 1 Each | KV8404 Mfr# 8404 | Face Frame Bracket for 8400 Series Slides, Front Mount, Zinc |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8403 Mfr# 8403 | Rear Mounting Brackets for 8417 & 8419 Slides, Zinc |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8404-KIT Mfr# 8404B KIT | Face Frame Bracket kit for 8400 Series Slides, Zinc |