Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt #6 x 13/32" pan head installation screw is a dedicated hardware-mounting fastener sized for attaching European cup hinges, drawer slides, and other cabinet hardware to the interior faces of cabinet panels. Zinc-plated with a coarse thread, sharp point, and #2 Phillips drive, it is built for the repetitive fastening work that comes with cabinet production and installation.
This screw is sized and shaped for one job: driving through the pre-bored mounting holes in cabinet hardware and into the cabinet panel beneath. The 13/32" length is long enough to grip securely in the panel without penetrating through 3/4" stock, and the pan head sits flush against the hardware plate rather than countersinking into it. That combination keeps hardware seated correctly and prevents the head from pulling through the mounting hole in the bracket or slide. The coarse thread engages particleboard and MDF cleanly, which covers the majority of cabinet box material in production cabinetry. The sharp point self-starts in panel faces so the installer does not need to pre-drill each hole independently of the hardware's own pilot locations.
The zinc plating on this screw provides standard corrosion protection suited to dry, interior cabinet environments. It is the right finish for kitchen and bath cabinet interiors, closet systems, and furniture carcasses where the hardware and panel surfaces stay dry. For outdoor or high-moisture applications, a screw with a heavier corrosion-resistant coating is the better choice.
Any shop or installer working with Knape and Vogt drawer slides, European-style hinges, or similar hardware will use this screw repeatedly across every cabinet in a run. The 1000-count box supports production-volume work without constant restocking. Contractors installing pre-built cabinets on site will find the pan head and Phillips drive combination covers the most common installation scenario: a cordless driver with a #2 Phillips bit driving hardware screws into panel faces from inside the cabinet box.
This screw is sized for mounting European cup hinges, drawer slides, and similar cabinet hardware whose mounting plates include pre-bored holes sized for a #6 screw. It is the standard installation fastener for Knape and Vogt hardware and most comparable European-style cabinet hardware.
Hardware mounting plates are designed to be fastened with a pan head that bears flat against the plate surface. A countersunk flat head would seat into the plate hole rather than against it, which can misalign or damage the mounting bracket. The pan head keeps the hardware positioned correctly and distributes clamping load across the plate flange.
Yes. The coarse thread is well matched to particleboard and MDF, the most common materials for cabinet box construction. The sharp point self-starts in both substrates without a separate pilot hole step.
The sharp point and coarse thread work in softwood plywood and solid softwood panels as well. For very dense hardwood panels, a pilot hole is recommended to prevent the sharp point from deflecting and to reduce driving torque.
A standard #2 Phillips bit fits this screw. That is the most common driver bit in cabinet installation kits and production shop setups, so no special tooling is needed.
A box of 1000 means this screw is ready for the full job, whether that is a kitchen run, a closet build-out, or an ongoing production schedule. Size it once, stock it, and mount hardware without interruption.
Sold In: 1000 Each
