Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 1300 drawer slide at 24 inch length is a side mount drawer slide that supports 3/4 extension, so drawers travel out far enough for access while staying guided inside the case. This 1300B ZC 24 model is part of the KV Model 1300 series, keeping it consistent with a proven euro slide platform when you standardize hardware across a run of cabinets. The slide is unhanded, so the same member works on either side of the drawer, simplifying layout and reducing sorting time at the bench. A side clearance of 1/2 inch is specified, giving a clear target when sizing drawer boxes to fit cabinet openings. The slide height of 3 inch matches common euro drawer layouts, which helps align with existing line boring and drawer side heights in production work.
This Knape and Vogt 1300 series piece is classified as a side mount drawer slide, so it is intended to sit along the drawer sides and cabinet interior walls rather than underneath. The specified side clearance of 1/2 inch tells you the total space that must exist between both drawer sides and the case, so the slide members can nest and move without binding. A 3 inch overall slide height gives a vertical footprint that coordinates with typical drawer side stock, allowing the slide to sit fully on the side surface. The 32 mm pattern noted in the description aligns with system holes in cabinet sides, streamlining layout when using 32 mm line boring for case construction.
The 24 inch 3/4 extension format suits drawers about that depth in base cabinets or utility pieces, so the hardware length and drawer length stay in balance. Because this product is in the Slides, Epoxy Coated Euro category and the Product Class notes Side Mount Drawer Slides, it works naturally in euro-style cabinet builds where slides sit between the drawer side and cabinet side. The side clearance of 1/2 inch can be built into cabinet planning for face frame or frameless designs, giving a predictable relationship between opening width and drawer box width. With a 3 inch slide height, the hardware covers a good portion of the drawer side height, which helps distribute loads along the side of the box during open and close cycles.
The 32 mm pattern reference means hole locations relate to the 32 mm system, so boring equipment or templates using this standard can position mounting points consistently from cabinet to cabinet. The ball bearing nylon roller movement offers a defined track for the drawer member, which supports smooth, repeatable travel each time the drawer is opened or closed. The positive stop lever that prevents accidental drawer removal keeps the drawer member engaged, which helps maintain alignment between front reveals over time because drawers do not lift off the slide in normal use. The stay close design works with that lever by holding the drawer near the fully closed position, limiting drift in lightly loaded drawers. Recommended #6 x 13/32 inch Phillips pan head screws (KV1300-83) match the slide hole sizing, helping screw heads seat correctly without interfering with the nylon roller or moving members.
The 1300B ZC 24 is a Knape and Vogt Model 1300 side mount drawer slide, so it installs along the drawer and cabinet sides instead of underneath the drawer box.
This slide is specified as 3/4 extension, so the drawer opens roughly three-quarters of its length, balancing access with continued support from the slide members.
The Knape and Vogt 1300 series description lists a side clearance of 1/2 inch, guiding the gap needed between drawer sides and cabinet sides for proper slide movement.
The slide height is specified as 3 inch, which sets the vertical space the hardware occupies on the drawer side and cabinet wall during layout.
The ball bearing nylon roller movement provides rolling contact between slide parts, promoting smooth opening and closing in typical cabinet use.
The web description recommends #6 x 13/32 inch Phillips pan head screws, referenced as KV1300-83, matching the hole design on the 1300B ZC 24 slide.
The 1300B ZC 24 combines a defined 24 inch length, 3/4 extension travel, and 1/2 inch side clearance, giving clear layout targets for drawer sizing and cabinet boring. With its Model 1300 euro slide design, 3 inch height, and side mount classification, it aligns with common shop construction methods. Using the specified 32 mm pattern and recommended #6 x 13/32 inch Phillips pan head screws, this Knape and Vogt 1300 drawer slide can be planned into cabinet runs where consistent mounting and smooth roller movement are priorities.
Sold In: 10 Set
