Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 18 inch 1300 drawer slide defines a side mount drawer slide setup with a known 18 inch length, which lets you plan cabinet depth and drawer box length around a consistent slide dimension for repeatable casework layouts on a run of cabinets. The slide belongs to the KV Model 1300 series, so it matches that family of euro slides when you need the same operating feel and geometry across multiple drawer sizes in a project. This product is a side mount drawer slide, which places the members on the drawer sides and cabinet sides, helping align with typical frameless or face-frame construction that is already set up for side mounting. The slide is part of the Knape and Vogt brand, giving it a defined manufacturer part number and series that tie back to published patterns and fitting expectations. The slide is described as unhanded, meaning each pair works on either side, which simplifies stocking and layout.
This slide lists a side clearance of 1/2 inch, which tells you the required gap between the drawer side and cabinet side, allowing you to size drawer boxes so the slide runs freely without binding or racking. The slide height is 3 inches, giving a fixed profile that helps when stacking drawers vertically inside a cabinet, because you can calculate clearances between drawers and face rails using that known height dimension. The 32 mm pattern reference ties the slide to a 32 mm system layout, which aligns well with line-bored cabinet sides and lets fabricators use existing drilling patterns and boring machines without custom layouts for this hardware.
This Knape and Vogt side mount drawer slide is identified with an 18 inch length, so it suits cabinet depths that support that nominal slide size for standard drawers in kitchens, baths, shop storage, or office casework. Being an epoxy coated euro slide, it works in euro-style cabinetry where a coated track and roller action are preferred instead of concealed undermounts, matching expectations for appearance when the drawer is open. The 1/2 inch side clearance spec aligns with many standard drawer box formulas that subtract 1 inch from the cabinet opening, which simplifies cutting lists and reduces layout changes when integrating this slide into an established shop workflow. Its 3 inch height offers a substantial bearing surface along the cabinet side, which helps support drawer motion over the length of the travel within the rated geometry of the slide profile.
The slide is described as a 3/4 extension hold-in/hold-out epoxy coated euro slide, meaning the drawer travels to approximately three-quarters of its length while the hold-in/hold-out behavior manages how the drawer stays in position at the closed or extended points. This series uses ball bearing nylon roller movement, which pairs a ball bearing action with a nylon roller so the drawer moves along the track with a controlled, guided feel rather than metal-on-metal contact. A positive stop lever prevents accidental drawer removal, providing a defined stop point during extension that keeps the drawer from coming free under normal use, which is useful in busy environments. The design is noted as stay close, signaling that the slide geometry resists drifting open, so drawers remain closed until they are intentionally pulled, supporting neat cabinet faces in kitchens or work areas. Recommended fasteners are given as #6 x 13/32 inch Phillips pan head (KV1300-83), which directs installers toward a screw that matches the slide holes and thickness, helping maintain grip and alignment along the length of the member.
The 1300B ZC 18 is a Knape and Vogt Model 1300 side mount drawer slide, so it mounts to the drawer sides and cabinet sides for a familiar euro-style installation layout.
This slide uses 1/2 inch side clearance, which means drawer boxes are sized 1 inch narrower than the cabinet opening to give space for the slide members on both sides.
The slide height is 3 inches, giving a known profile that helps plan vertical drawer spacing and face-frame or frameless clearances when stacking multiple drawers.
The slide provides 3/4 extension, so the drawer extends to roughly three-quarters of its length, balancing access to contents with support from the remaining slide engagement.
The 1300 series uses ball bearing nylon roller movement, guiding the drawer on a coated track so opening and closing feel controlled and consistent under everyday loads.
The positive stop lever prevents accidental drawer removal, keeping the drawer captured on the slide during normal extension and retraction, which supports safety and alignment.
This Knape and Vogt 18 inch 3/4 extension hold-in/hold-out euro slide, with 1/2 inch side clearance, 3 inch height, and 32 mm pattern, gives cabinetmakers a defined hardware choice that fits euro-style casework layouts and predictable drawer sizing. Using the KV Model 1300 series details and the 1300B ZC 18 identifier, projects can standardize on this side mount drawer slide wherever this length and operating feel are needed, keeping installations consistent across kitchens, baths, and built-ins.
Sold In: 10 Set
