Knape And Vogt 10 Inch Over Travel Slides

Knape and Vogt 10 inch over travel drawer slides use the KV 8405 Series design to give drawers an extra 1 inch of over-travel, allowing the drawer to extend beyond the cabinet front so the rear of the box is easier to access during use. The side mount configuration fits standard casework where a side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side is designed in, helping installers hit predictable reveals and smooth action in face-frame or frameless layouts built to that clearance. A height of 1-13/16 inch sets a consistent profile along the drawer side, which matters when laying out drawer heights and clearances in stacked banks. The ball bearing construction supports a smooth running action under load, which helps finished drawers feel precise when opened and closed repeatedly in everyday cabinet applications.

Key KV 8405 Slide Details For Cabinet Work

• The 1 inch over-travel function lets the 10 inch slide move the drawer slightly past full extension, which helps users see and reach items at the back of shallow drawers without shifting their stance at the cabinet.
• A side clearance spec of 1/2 inch plus 1/32 inch minus 0 inch per side gives builders a clear machining target, which reduces fitting time and helps banks of drawers track consistently from cabinet to cabinet.
• The 1-13/16 inch slide height creates a defined footprint on the drawer side, allowing installers to align multiple slides vertically and maintain consistent margins between drawer boxes in a stack.
• Lever disconnect lets the drawer member separate from the cabinet member, which speeds installation and later service because drawers can be removed or reinstalled without disturbing the cabinet member alignment.
• The ball retainer latch and polymer stop cushions are built into the slide action, helping the drawer stay in position at the end of travel and softening the stop point for a more controlled feel during regular use.
• The anochrome finish on the slide provides a uniform metallic appearance, which suits professional cabinet interiors where exposed hardware lines need to look consistent from project to project.

Side Mount Installation And Fastener Choices

These Knape and Vogt 8405B 10 side mount drawer slides are specified as side mount units, so they fasten directly to the cabinet side and drawer side in typical casework construction. The recommended fasteners are #7 x 1/2 inch Phillips pan head screws, which match the slide hole design and help installers secure the members without protruding above the hardware surface. The 32 mm pattern noted for this model supports layouts that follow 32 mm system drilling, giving shop crews a straightforward way to integrate the slides into line-bored cabinet sides. With the side clearance set at 1/2 inch plus 1/32 inch minus 0 inch each side, case and drawer construction can be planned around this measurement so slides run smoothly once installed.

Using KV 8405B 10 Slides In Real Projects

Where These 8405 Series Slides Fit Best

The Knape and Vogt 8405B 10 drawer slides are part of the 8405 Series, identified in the SAP description as a 10 foot drawer slide with zinc over-travel, and sized here as a 10 inch length suitable for shorter drawer boxes. Their side mount, ball bearing design fits cabinet and furniture projects where a 10 inch slide length matches the depth of the drawer and a 1/2 inch plus 1/32 inch minus 0 inch side clearance is part of the layout. The 32 mm pattern allows them to integrate cleanly into cabinets produced with 32 mm line boring, which is common in commercial and shop-built casework. With a height of 1-13/16 inch, the slides align well along drawer sides that have enough vertical surface, keeping hardware centered and giving the bank a uniform appearance along the rails.

Details That Support Repeatable Slide Performance

The 1 inch over-travel built into the KV Model 8405 slide means drawers travel slightly beyond the cabinet front, so the rear corners of a 10 inch drawer can clear the face and be fully visible, which helps end users work more efficiently in shallow storage spaces. Lever disconnect lets installers attach the cabinet member first, then mount the drawer member to the drawer box and reconnect, which streamlines production because drawers can be tested or adjusted without resetting the fixed members. The ball retainer latch contributes to stable operation by helping the ball bearings stay positioned within the raceway, so the slide maintains consistent movement over its life in the cabinet. Polymer stop cushions at the end of travel absorb contact between moving members, which reduces harsh metal-on-metal impact and supports a smoother feel at full extension or retraction. The anochrome finish adds a consistent look across multiple slides on a project, an advantage when drawers are opened regularly in residential or commercial cabinetry. Together, these details help the Knape and Vogt 8405B 10 slide deliver predictable movement that supports repeatable results from installation through long-term use.

Common Questions About KV 8405B 10 Slides

Selecting KV 8405B 10 Slides For Your Project

The Knape and Vogt 8405B 10 over travel drawer slide combines a 10 inch length, 1 inch over-travel, and 1/2 inch plus 1/32 inch minus 0 inch side clearance to suit short drawers in precision-built cabinets. With side mount installation, a 1-13/16 inch height, lever disconnect, ball bearing action, 32 mm pattern, and anochrome finish, these 8405 Series slides offer a defined set of dimensions and features installers can match to cabinets designed around the same measurements.