Knape And Vogt 22 Inch Drawer Slides For Smooth Travel

Knape and Vogt 22 inch drawer slides 8405B 22 are unhanded side mount ball bearing slides that support drawers using a side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, which helps installers hit consistent reveals in cabinet runs. The 1 inch over-travel design lets the drawer extend past full extension, improving access to the back of the drawer in deeper cabinet applications. A height of 1-13/16 inch gives a compact profile that fits common cabinet and drawer box constructions. These 8405 Series slides use ball bearing construction, which allows drawers to move with controlled, even motion under load. The anochrome finish provides a uniform metal appearance that coordinates with typical cabinet hardware finishes. Non-handed construction means the same member works on either side of the drawer, simplifying layout and inventory for production or field installations.

Key Knape And Vogt 8405 Slide Details For Pros

• Model 8405 with 1 inch over-travel lets the drawer open beyond full extension, making it easier to reach tools, fasteners, or stored parts at the rear of the drawer.
• Side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side defines the required drawer-to-cabinet gap, supporting repeatable box sizing in shop setups and CNC programming.
• A height of 1-13/16 inch balances vertical strength with a low profile, helping these slides fit within standard side panels without crowding the drawer bottom or top rail.
• The 32 mm pattern aligns with system drilling practices, allowing straightforward integration into frameless cabinet production and jig-based drilling workflows.
• Lever disconnect allows the drawer member to release from the cabinet member, which simplifies installation, removal, and service when adjusting boxes or working inside the case.
• The ball retainer latch and polymer stop cushions work together to manage travel and contact points, helping drawers close to position with controlled impact in everyday use.

Side Mount Drawer Slide Fit And Mounting Details

These KV 8405 Series side mount ball bearing slides are designed as side mount drawer slides, so they align along the cabinet side panels and drawer sides in typical casework construction. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side translates directly into the drawer width sizing relative to the cabinet opening, supporting predictable fitting on production lines. A consistent height of 1-13/16 inch allows installers to position the slide vertically in relation to the drawer bottom or reference holes while staying inside standard cabinet side heights. The 32 mm pattern ties into metric system hole grids, which benefits shops using line boring machines or 32 mm layout jigs. Recommended fasteners are #7 x 1/2 inch Phillips pan head, providing a head style and length suited to engaging the slide holes without projecting excessively into the drawer space.

Where These KV 8405 Slides Fit And Why Specs Matter

Side Mount Ball Bearing Slides In Cabinet Use

The Knape and Vogt 8405B 22 slide is a side mount drawer slide in the 8405 Series, so it works in applications that call for ball bearing side mount performance rather than bottom or center mounting. The specified 22 inch length supports medium-depth cabinet drawers where full access is important, such as tool drawers, hardware storage, or shop casework. The 1 inch over-travel feature lets the drawer extend beyond the cabinet face, which helps when drawers are fitted under overhanging tops or face frames because stored items clear the front for easier reach. Non-handed construction means each slide can be used on either the left or right side, which simplifies parts management for installers who work with multiple cabinet layouts. The anochrome finish presents a uniform, neutral metal appearance, helping these slides blend with various cabinet interiors and hardware choices without calling attention to the slide hardware.

Details Supporting Repeatable Installation And Service

The 32 mm pattern on this 8405 Series slide aligns with standard system drilling, which supports accurate, repeatable hole placement when using line boring equipment or drilling jigs. That alignment helps drawers track square because the slide mounting points follow a consistent vertical pattern from cabinet to cabinet. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side gives a defined tolerance window, which supports reliable planning of drawer widths and reduces rework on boxes that must fit production case openings. Lever disconnect allows field removal of the drawer member from the cabinet member, which is useful during finishing, transport, or later service when access to slides or interiors is required. The ball retainer latch works with the ball bearing design to keep the moving components in place during operation, supporting smooth engagement along the full 22 inch travel. Polymer stop cushions engage at travel limits, softening contact when the drawer reaches the end of extension or closes to its stop point.

Common Questions About KV 8405B 22 Drawer Slides

Select KV 8405B 22 Slides For Precise Drawer Fit

The Knape and Vogt 8405B 22 anochrome side mount ball bearing slide combines a 22 inch length, 1 inch over-travel, and 1/2 inch plus 1/32 inch minus 0 inch side clearance to support accurate drawer sizing. With a 32 mm pattern, 1-13/16 inch height, lever disconnect, ball retainer latch, and polymer stop cushions, it aligns with production drilling methods while supporting smooth drawer operation in cabinet, shop, or storage installations.