Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kane knob pairs a 1-3/16 in (30 mm) diameter with a simple round profile, so it functions as a compact pull point on cabinet doors and drawers where a modest footprint is preferred. The Kane collection is described as combining timeless beauty with utilitarian design, which positions this knob as a straightforward option for cabinets that need a clean, understated look rather than a showpiece. The weathered nickel finish gives the zinc die-cast knob a muted metallic appearance, supporting projects that call for a softer metal tone instead of a bright, reflective surface. A 1-3/16 in (30 mm) projection places the gripping surface away from the door face, helping fingers clear the cabinet edge during everyday use. With a base diameter of 11/16 in (17 mm), the knob meets the door at a smaller footprint, which can be useful when spacing multiple knobs along narrow rails or smaller drawer fronts.
The Amerock Kane Series Weathered Nickel 1-3/16 in (30 mm) Diameter Knob uses its stated dimensions to guide drilling and layout on cabinet fronts. The 1-3/16 in (30 mm) diameter and width indicate the overall face size, helping installers visualize clearances between adjacent knobs. A 1-3/16 in (30 mm) projection defines how far the knob stands off the door or drawer, which influences how deep fronts can be recessed without crowding the handhold. The base diameter of 11/16 in (17 mm) sets the footprint against the surface, providing a reference when aligning the knob centerline with rails, stiles, or decorative profiles. Screw size is specified as 8-32 x 1 in, which directs the threaded hole interface in the knob to that machine screw size for fastening through typical cabinet door and drawer thicknesses.
The Amerock Kane Series Weathered Nickel 1-3/16 in (30 mm) Diameter Knob is part of the Kane collection, which is described as delivering a classic and understated look. That description positions the knob for cabinet runs where the hardware is meant to support the overall design without drawing primary attention. The 1-3/16 in (30 mm) diameter works on standard cabinet doors and medium-width drawer fronts, because the face size stays proportional without overwhelming narrow panels. A matching 1-3/16 in (30 mm) projection suits typical face-frame and frameless cabinets, giving users a comfortable grip when opening doors that sit flush or near-flush to the frame. The weathered nickel finish defines its appearance within decorative hardware, pairing well with other weathered nickel elements so that door and drawer fronts read as a cohesive set.
The Kane collection description emphasizes utilitarian design, and the given dimensions translate that into predictable layout work. With the knob diameter, width, and projection all specified at 1-3/16 in (30 mm), installers can use a single size reference when planning hole locations along rails and drawer fronts. This consistency helps cabinet shops standardize drilling jigs around the knob center, reducing layout variation across multiple fronts. The 11/16 in (17 mm) base diameter determines how much flat surface is needed around the mounting point, which is helpful when knobs are set close to panel edges or raised profiles. The zinc die-cast construction creates a uniform metal body around the threaded mounting point, supporting repeatable tightening of the 8-32 x 1 in screw without changing the basic installation approach from one knob to the next. Together, these details let shops and installers execute cabinet runs with a repeated, familiar hardware setup.
The Amerock Kane knob has a 1-3/16 in (30 mm) diameter, a 1-3/16 in (30 mm) projection, and an 11/16 in (17 mm) base diameter, which guide drilling layout and clearance planning on cabinet fronts.
The weathered nickel finish gives the knob a muted metal look, helping it coordinate with other weathered nickel decorative hardware for a unified appearance across doors and drawers.
The Amerock BP53700WN knob is made from zinc die-cast, providing a solid metal body that supports typical repeated pulling on cabinet doors and drawers in everyday use.
The Kane series knob has a 1-3/16 in (30 mm) projection, setting the gripping surface away from the door face so fingers can pull without pressing tightly against the cabinet.
The Amerock Kane knob is specified with an 8-32 x 1 in screw size, indicating the threaded connection used to fasten the knob through standard cabinet doors and drawer fronts.
The Kane collection is described as having timeless beauty with utilitarian design, indicating a classic and understated knob style that supports rather than dominates cabinet aesthetics.
The Amerock Kane Series Weathered Nickel 1-3/16 in (30 mm) Diameter Knob, BP53700WN, combines a compact round profile with a weathered nickel finish, giving cabinet projects a defined yet understated pull point. The specified zinc die-cast material and detailed dimensions - including diameter, projection, width, and base diameter - translate directly into predictable drilling and layout on doors and drawers. For installers and shops planning consistent runs of decorative hardware, these clearly stated measurements and the classic Kane collection styling support a straightforward hardware choice when setting up cabinet fronts.
Sold In: 1 Each
