Amerock Kane Series Polished Nickel 18" (457 mm) Center to Center Appliance Pull, -BP53806PN

Amerock Kane Appliance Pull For Large Fronts

Amerock Kane appliance pull pairs a 19-1/4 inch length with an 18 inch center-to-center mount, so the handle spans appliance or tall cabinet fronts while lining up with standard 18 inch drilling. The polished nickel finish creates a bright, reflective surface that matches polished nickel appliance trim and decorative hardware finishes. Zinc construction forms the body of the pull, giving a solid metal feel for repeated opening and closing. A 1-13/16 inch projection sets the gripping surface away from the door or panel, providing finger clearance during use. The 1-1/4 inch width gives a substantial profile across the front, helping the pull stand out visually on wider doors. A 1-1/4 inch base diameter at each end creates defined mounting points that visually frame the handle on the surface.

Key Amerock Kane Appliance Pull Details

• The 18 inch center-to-center dimension positions mounting holes on a long spread, matching layouts designed for appliance fronts or wide cabinet doors.
• The 19-1/4 inch overall length extends beyond the hole spread, giving extra gripping area at both ends for hands of different sizes.
• The 1-13/16 inch projection holds the hand away from the door face, which supports clearance when operating thicker appliance or cabinet doors.
• The 1-1/4 inch width provides a broad front surface, helping the pull read in scale with taller or wider faces.
• The 1-1/4 inch base diameter at each mounting point creates a defined footprint that visually anchors the pull to the cabinet or appliance panel.
• The polished nickel finish delivers a smooth, reflective appearance that coordinates with other polished nickel decorative hardware in the same space.
• The zinc material gives the pull a metal construction, supporting a consistent feel across multiple doors using the same series.

Mounting Dimensions For Appliance And Cabinet Fit

The 18 inch center-to-center mounting dimension sets fixed hole spacing from one end of the Amerock Kane Series pull to the other, guiding drilling layouts on appliance panels or tall cabinet doors. The 19-1/4 inch overall length places the ends of the pull slightly beyond the holes, framing the handle across the surface. A 1-13/16 inch projection sets how far the pull stands off the face, which affects door swing clearance against adjacent surfaces. The 1-1/4 inch width and 1-1/4 inch base diameter define how much front surface the pull covers, helping plan spacing relative to door edges, moldings, or neighboring hardware in the same run.

Using The Kane Series Appliance Pull In Projects

Where This 18 Inch Center Pull Performs Best

The 18 inch center-to-center measurement positions this Amerock Corporation appliance pull for applications that call for a long handle across the face, such as wide cabinet doors or appliance-style fronts that visually align with an 18 inch spread. The 19-1/4 inch length lets the pull extend past the mounting points, so on taller doors it visually bridges more of the panel surface. The 1-13/16 inch projection gives depth off the surface, which helps when hands approach from the side on deeper cabinet runs. The 1-1/4 inch width and 1-1/4 inch base diameter proportion the pull so it does not disappear on larger faces, supporting consistent scale when repeating the Kane Series across multiple fronts.

Why These Amerock Dimensions Support Consistent Results

The fixed 18 inch center-to-center spacing on the BP53806PN model from Amerock Corporation standardizes drilling from project to project, limiting variation when setting up multiple doors or panels with the same Kane Series layout. The 19-1/4 inch overall length then aligns visually with that spacing, maintaining equal reveal beyond each hole so runs of hardware appear uniform. A 1-13/16 inch projection establishes a repeat depth for the handle line, which helps align pulls on adjacent cabinets and appliance fronts in a straight visual plane. The 1-1/4 inch width and matching base diameter simplify layout near door edges, because the pull occupies a known amount of surface from side to side. The polished nickel finish keeps each piece looking consistent within the Kane collection, supporting a continuous appearance across a full installation.

Common Questions About BP53806PN Fit And Use

Select The Amerock Kane Pull For Defined Layouts

The Amerock Kane Series polished nickel appliance pull brings an 18 inch center-to-center layout, 19-1/4 inch length, and zinc construction together for appliance-style and wide cabinet applications. The 1-13/16 inch projection, 1-1/4 inch width, and 1-1/4 inch base diameter give predictable coverage and clearance on each front. The polished nickel finish ties the pull to matching decorative hardware and fixtures. Select this BP53806PN model when a consistent Kane Series appearance and fixed 18 inch mounting spread support the overall hardware plan.