Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kane appliance pull combines a classic look with a practical grip, giving large cabinet doors and appliances a consistent handle point. The 8 inch (203 mm) center-to-center mounting spreads the load across the door, which helps when you are moving heavier fronts. Overall length of 8-7/8 inches (225 mm) provides ample hand clearance along the bar, useful on tall pantry or integrated appliance panels. The 1-5/8 inch (41 mm) projection sets the pull off the surface, creating space for fingers while keeping the handle tight to the face. A 7/8 inch (22 mm) width offers a substantial feel in the hand without crowding adjacent hardware. Matching 7/8 inch (22 mm) base diameter at each end gives a stable footprint on the door, which supports solid mounting and a clean, finished appearance on face frames or frameless cabinetry.
The Amerock Kane appliance pull is drilled at 8 inches (203 mm) center-to-center, so hole layout follows a simple, even spacing along the rail of a door or panel. With an overall length of 8-7/8 inches (225 mm), the pull extends slightly past the mounting points at each end, giving clear visual reference when aligning to stiles and edges. The 1-5/8 inch (41 mm) projection defines the standoff from the face, which helps when planning for door swings near walls or adjacent handles. A 7/8 inch (22 mm) width and 7/8 inch base diameter define the bearing area on the surface, so you can plan clearances between neighboring pulls or trim details.
The Kane series appliance pull from Amerock is part of a decorative hardware and moldings lineup focused on handles and pulls, so it suits cabinet doors and appliance fronts that need a strong, central grip. Its classification as an appliance pull signals use on larger or heavier fronts where a longer handle helps distribute force. The oil-rubbed bronze finish ties into traditional or transitional cabinet schemes, carrying the same tone across doors, panels, and trim. With 8 inch (203 mm) center-to-center mounting, the pull fits layouts where hardware needs to track consistently up tall doors, allowing a straight visual line. Length of 8-7/8 inches (225 mm) gives proportion on wider rails, which helps the pull look balanced on full-height pantry doors or integrated appliance panels.
The 8 inch (203 mm) center-to-center dimension provides a fixed drilling reference, which helps installations stay repeatable across a bank of cabinets or multiple appliance panels. Using the same spacing with an 8-7/8 inch (225 mm) overall length ensures that the overhang past each screw line remains even, which supports consistent sight lines. The 1-5/8 inch (41 mm) projection keeps the gripping surface away from the door face, reducing knuckle contact and helping finished surfaces stay cleaner during regular use. Width and base diameter at 7/8 inch (22 mm) focus the bearing load into a known area, which is useful when aligning pulls over rail-and-stile joinery or panel details. The zinc die-cast construction maintains precise edges and profiles, supporting uniform appearance when multiple Kane pulls are installed in the same project.
The Amerock Kane appliance pull has an 8 inch (203 mm) center-to-center dimension, which sets the hole spacing for drilling and keeps hardware layout uniform across multiple doors.
The Amerock BP53804ORB Kane pull measures 8-7/8 inches (225 mm) overall, so it visually fills wider rails and appliance fronts while matching the 8 inch center-to-center drilling.
The Kane appliance pull is zinc die-cast, creating a solid, consistent body that supports frequent opening and closing on cabinets and appliance panels.
This Amerock Kane pull has an oil-rubbed bronze finish, giving a dark, classic look that coordinates with similar bronze decorative hardware.
The Kane appliance pull projects 1-5/8 inches (41 mm) from the surface, providing finger clearance behind the handle while keeping the profile close to the door.
The Amerock Kane appliance pull is 7/8 inch (22 mm) wide with a 7/8 inch base diameter, which defines its footprint and helps plan spacing between adjacent pulls.
The Amerock Kane appliance pull BP53804ORB pairs an 8 inch (203 mm) center-to-center layout with an 8-7/8 inch (225 mm) length that suits tall doors and appliance fronts. Its zinc die-cast construction and oil-rubbed bronze finish align appearance and function across a project. Defined projection, width, and base diameter give clear planning dimensions when you are laying out multiple handles. For projects calling for a coordinated, traditional pull in a known Amerock Kane series size, this appliance pull is a practical choice to match your cabinet or appliance layout.
Sold In: 1 Each
