Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kane appliance pull pairs a 18 inch (457 mm) center-to-center span with a 19-1/4 inch (489 mm) overall length, giving full-hand grip across larger panels. That dimensioning supports consistent alignment across tall doors and appliance fronts in the same run.
The pull is part of the Kane collection, so its profile and detailing match other Kane pieces, helping keep a unified look when mixing appliance pulls with smaller handles. That consistency matters when laying out long banks of cabinets or full-height panels.
A zinc material structure gives the pull a solid feel while keeping weight manageable on the door or panel, which is useful on oversized fronts where hardware weight adds up. The golden champagne finish provides a warm metallic tone, allowing the pull to coordinate visually with similar finishes in the space.
With a projection of 1-13/16 inch (46 mm) and a width of 1-1/4 inch (32 mm), the pull provides a defined gripping area that stands off from the surface, supporting hand clearance when operating heavier doors.
This Amerock Kane Series pull uses an 18 inch (457 mm) center-to-center mounting layout, so hole boring follows that spacing along the door or panel edge. That fixed dimension helps when setting up jigs or templates for repeat drilling across a run.
The 19-1/4 inch (489 mm) length defines how much linear space the pull occupies on the front, which is useful when balancing margins to panel edges or neighboring hardware. A 1-13/16 inch (46 mm) projection establishes the stand-off distance, supporting hand clearance against the face.
With a 1-1/4 inch (32 mm) width and base diameter, the pull seats over a compact footprint while still covering the bored holes, which is helpful when aligning the pull along narrow rails or stile widths.
The Amerock Kane Series Golden Champagne 18 inch center-to-center appliance pull is part of the Kane collection, so it fits projects where that collection is already specified for smaller handles and pulls. Using the same collection helps carry one profile and edge detail from cabinet doors to appliance fronts.
The 18 inch (457 mm) center-to-center span suits taller doors or wider panels where a longer pull balances the door proportions. This dimension also works when aligning multiple pulls along a bank of tall cabinets, maintaining equal spacing and visual rhythm.
The 19-1/4 inch (489 mm) overall length provides a long gripping bar that works well on full-height pantry doors or integrated appliance panels, where extra length gives several hand positions. The golden champagne finish supports projects calling for a warm-toned metal color on visible fronts.
The zinc material construction supports use in decorative hardware applications where a metal pull is required. With a width and base diameter of 1-1/4 inch (32 mm), the pull fits on many common rail widths while still covering the fastener area.
The defined 18 inch (457 mm) center-to-center dimension is critical when building drilling jigs for repetitive layouts, because installers can set stops and guides to that number and repeat it across an entire elevation.
A 1-13/16 inch (46 mm) projection provides consistent stand-off from the surface, which is important when aligning this pull with other Kane collection pieces so that grips feel similar from door to door.
The 1-1/4 inch (32 mm) width and matching base diameter help keep the footprint compact while still large enough to cover the bore area, giving some tolerance for minor layout variations without exposing edges around the bases.
The golden champagne finish designation ties directly to a specific color within Amerock offerings, which helps designers and installers coordinate this pull with other golden champagne items on the same job for uniform appearance.
The Amerock Kane appliance pull uses zinc material, giving a metal body that pairs with the decorative hardware and moldings category. This keeps it aligned with other metal handles and pulls in cabinet and appliance applications where material consistency is important.
The Amerock Kane appliance pull has a 18 inch (457 mm) center-to-center spacing, which sets the distance between mounting holes for drilling and layout.
The Amerock BP53806BBZ appliance pull length is 19-1/4 inch (489 mm), so it occupies that much linear space on the door or panel face.
This golden champagne appliance pull projects 1-13/16 inch (46 mm) from the surface, giving stand-off for hand clearance when operating doors or panels.
The Kane collection pull is made from zinc with a golden champagne finish, pairing metal construction with a warm metallic color tone.
The Amerock Kane pull has a width of 1-1/4 inch (32 mm), creating a defined gripping surface across its length.
This Kane Series appliance pull is identified by manufacturer part number BP53806BBZ, which ties to its 18 inch center-to-center and golden champagne finish.
The Amerock Kane appliance pull with 18 inch (457 mm) center-to-center spacing, 19-1/4 inch (489 mm) overall length, and golden champagne finish gives a defined option when specifying hardware across cabinets and appliance fronts. Zinc construction, 1-13/16 inch (46 mm) projection, and 1-1/4 inch (32 mm) width provide known dimensions for layout, drilling, and visual balance on tall doors or integrated panels.
