Amerock Kane Appliance Pull For Larger Fronts

Amerock Kane appliance pull gives a classic, understated grip for appliance-height doors using a 12 inch (305 mm) center-to-center layout, so it spans wider fronts cleanly and lines up with common appliance panel drilling. The 12-15/16 inch (329 mm) overall length lets the pull visually balance tall panels while leaving room at the ends for edge reveals on cabinetry. A 1-11/16 inch (43 mm) projection sets the handle out from the face, creating finger clearance for a solid grasp on heavier doors. The 1 inch (25 mm) width provides a broad, comfortable contact surface along the hand, which is helpful when operating built-in appliances or large pantry fronts. A matching 1 inch (25 mm) base diameter transitions from the door face to the grip, giving a consistent footprint that works with standard drilling patterns on many appliance-style panels.

Key Amerock Kane Appliance Pull Details

• The Kane collection design creates a classic and understated look, so the pull works well where a simple, timeless style is preferred across multiple cabinets or appliance fronts.
• Zinc die-cast construction forms the pull as a solid, molded piece, giving a precise shape around the 12 inch center-to-center layout while keeping overall weight manageable on door faces.
• The oil-rubbed bronze finish covers the zinc die-cast body, providing a dark, traditional appearance that coordinates with other bronze hardware on surrounding cabinetry.
• A 12 inch (305 mm) center-to-center dimension sets consistent mounting hole spacing, which helps when aligning multiple pulls in a row on appliances and tall cabinet doors.
• The 12-15/16 inch (329 mm) overall length extends beyond the mounting points, framing the panel visually and offering a long gripping area along the appliance or cabinet face.
• A 1-11/16 inch (43 mm) projection pulls the handle out from the surface, creating working knuckle space between hand and door when opening heavier or thicker fronts.
• The 1 inch (25 mm) width across the bar offers a stable gripping surface, distributing pressure across the hand during repeated opening and closing of large doors.
• The 1 inch (25 mm) base diameter at each end defines a neat footprint on the door face, helping the pull sit firmly over the drilled holes and align with adjacent hardware.

Mounting Dimensions For Appliance Panel Layout

This Amerock Kane appliance pull uses a standard 12 inch (305 mm) center-to-center measurement, so installers can lay out mounting holes accurately along the panel centerline for a balanced appearance. The 12-15/16 inch (329 mm) overall length means holes are set slightly inward from each end, which leaves consistent margins near panel edges when positioning the pull on wide doors. A 1-11/16 inch (43 mm) projection determines how far the grip stands off the surface, which matters when plotting clearances for adjacent doors or trim. The 1 inch (25 mm) base diameter helps define the flat contact area where the pull meets the panel, which is useful when marking hole locations relative to door rails and stiles.

Using This Kane Series Appliance Pull On Projects

Where The 12 Inch Center Spacing Works Best

The 12 inch (305 mm) center-to-center spacing on this Amerock Kane appliance pull suits wider fronts such as appliance panels or tall pantry doors, because the mounting points span a larger portion of the face. The 12-15/16 inch (329 mm) overall length gives the handle enough reach to look proportional on these larger surfaces, which helps the hardware match the scale of full-height cabinetry. With a 1 inch (25 mm) width, the pull offers a broader gripping area that pairs well with heavier doors often found on appliance installations. The 1-11/16 inch (43 mm) projection also supports this type of use by providing space for a full hand behind the bar, which is helpful when operating doors that carry additional appliance or storage weight.

Details That Support Consistent Alignment And Feel

The oil-rubbed bronze finish on the Kane series appliance pull establishes a consistent, dark tone across the full 12-15/16 inch length, so multiple pulls on adjacent doors present a unified look. Zinc die-cast material allows the manufacturer to keep tight control over the 12 inch center-to-center dimension and the 1 inch base diameter, which supports uniform drilling patterns from one door to the next. The 1-11/16 inch projection remains the same across installations, so the clearance between pull and door surface feels consistent wherever the pull is mounted in a kitchen or built-in run. The 1 inch width and matching 1 inch base diameter give the handle a steady contact footprint and grip profile, helping the pull feel the same in the hand whether used on an appliance panel, a tall pantry door, or other large cabinet fronts.

Common Questions About The Amerock Kane Appliance Pull

Selecting This Pull For Appliance-Style Fronts

The Amerock Kane appliance pull in oil-rubbed bronze combines a 12 inch (305 mm) center-to-center layout with a 12-15/16 inch (329 mm) overall length, matching the scale required for appliance-height doors and tall cabinets. Zinc die-cast construction with a 1 inch (25 mm) width and 1 inch (25 mm) base diameter delivers a consistent grip and footprint across multiple fronts. A 1-11/16 inch (43 mm) projection and the Kane collections understated styling help this BP53805ORB pull fit into traditional kitchens where a long, comfortable handle is needed on larger panels.