Amerock Rochdale 3-3/4" (95 mm) Center to Center Satin Nickel Cup Pull, BP53716G10

Amerock Rochdale Cup Pull For Drawer Projects

Amerock Rochdale cup pull gives drawers a defined 3-3/4 in (95 mm) center-to-center grip that sets consistent spacing across a run of cabinets. The satin nickel finish presents a neutral metal tone that aligns easily with many hinge and appliance finishes, helping projects land on a coordinated look without custom finishing work. Zinc die-cast construction creates a solid, single-piece form that supports everyday drawer use in residential cabinetry. The cup pull shape gives fingers a protected recess to grab, which helps users open heavier drawers with a confident pull. A projection of 3/4 in keeps the profile tight to the drawer front while still giving enough clearance for a comfortable handhold. With a total length of 5-3/8 in and a width of 7/8 in, this pull covers typical previous screw marks from similar-size hardware during retrofit work.

Key Rochdale Cup Pull Details For Projects

• The Rochdale Collection design uses rivet accents and masculine lines, giving casework an industrial-inspired appearance that suits loft-style and utility cabinetry where a stronger visual statement is desired.
• A 3-3/4 in (95 mm) center-to-center dimension ties directly to common drilling patterns, allowing existing 96 mm layouts to be reused on many replacement or upgrade jobs without redrilling drawer fronts.
• Satin nickel finish provides a soft metallic sheen that works in both light and dark color schemes, making it practical for multi-room projects that need one pull style across kitchen, bath, or built-ins.
• Zinc die-cast material produces a rigid, molded body that resists flex under pull force, supporting reliable use on frequently opened drawers and helping hardware stay aligned over time.
• The 5-3/8 in overall length gives the front of the pull enough coverage to visually balance standard drawer front widths, helping finished installations look proportionate on common cabinet lineups.

Mounting Dimensions That Support Straight Installs

The 3-3/4 in (95 mm) center-to-center measurement on this Amerock BP53716G10 pull lines up with one of the most widely used drawer drilling patterns, simplifying layout work when measuring and boring new fronts. A projection of 3/4 in sets the cup pull off the surface just enough for a solid grip without catching on passing traffic in tighter kitchens or shop spaces. With a width of 7/8 in, the pull occupies minimal vertical space on the drawer, leaving room above or below for reveals and trim while still giving clear handle definition. The 5-3/8 in overall length helps installers align the pull visually to rail widths and panel breaks, creating straight sightlines along a bank of cabinetry.

Why This Amerock Rochdale Cup Pull Fits Real Work

Industrial Rochdale Styling For Cabinet Runs

The Rochdale Collection styling on this cup pull uses visible rivet cues and strong lines, which gives cabinets a utilitarian character suited to workshop-themed, industrial, or transitional interiors. That design approach lets installers deliver a distinctive look using standard drilling patterns rather than custom metalwork. The satin nickel finish tones down reflections while still reading as metal, so it pairs smoothly with many stock satin nickel hinges and other decorative hardware within the same space. Because the pull spans 5-3/8 in in length, it visually anchors both narrow and medium-width drawers, helping runs of base cabinets look consistent from end to end. The 7/8 in width keeps the hardware from dominating the drawer face, so door styles and wood grain still show clearly in the finished installation.

Dimensions That Help Repeatable Layout And Retrofits

The 3-3/4 in (95 mm) center-to-center spacing on this zinc die-cast cabinet cup pull matches a common 96 mm layout, which supports efficient repeat drilling with jigs and templates on larger jobs. For replacements, that same center distance often lines up with many existing holes, which can reduce surface repair work on drawer fronts. A 3/4 in projection defines how far the cup stands off the surface, helping installers predict clearances near countertop overhangs or adjacent doors when planning handle placement. The 5-3/8 in length and 7/8 in width give known coverage dimensions, useful when checking that the pull will span old mark patterns or decorative details on the face. Zinc die-cast construction gives the pull a consistent casting shape, supporting uniform alignment when multiple units are installed in a row.

Common Questions About Amerock BP53716G10 Pull

Select This Cup Pull For Matching Layouts

The Amerock Rochdale cup pull with 3-3/4 in (95 mm) center-to-center spacing gives installers a defined layout that coordinates with many cabinet drilling jigs. Satin nickel finish and zinc die-cast construction streamline both design and performance choices on drawer runs. For projects calling for industrial-inspired hardware within familiar mounting dimensions, this Rochdale Collection pull aligns visual style and practical measurements in a single part number.