Reeve round steel single table leg 1-1/4" dia. x 28" h sat in zinc leg-28-znc-r

Reeve Round Steel Single Table Leg For Work Surfaces

Reeve round steel single table leg is a 1-1/4 inch diameter, 28 inch high leg in a satin zinc finish from Reeve Store Equipment Company, giving you a defined size and look for consistent bench or table builds. The leg is made of cold rolled steel, so the support comes from a defined material and gauge instead of mystery stock, which matters when you are standardizing on a leg for multiple installs. The welded mounting plate on the top of the leg creates a fixed interface between leg and plate, helping hold alignment during layout and fastening. The 16 gauge construction, called out in the description, ties the wall thickness to predictable strength and drilling behavior. This leg is classified under work surface and table legs, so it is aimed at supporting horizontal surfaces rather than light decorative use.

Key Table Leg Details That Support Workflow

• The 1-1/4 inch diameter leg establishes a consistent footprint, which helps when laying out corners and clearances across multiple tables in the same run.
• The 28 inch height lines up with typical work surface and table dimensions, reducing layout adjustments when matching existing counters or benches.
• The satin zinc finish provides a defined surface appearance, which helps when matching visible legs across a project where appearance needs to stay uniform.
• The leg is made of cold rolled steel, so cutting or drilling happens in a known material, important when you are tying legs into custom frames or stiffeners.
• The 16 gauge specification identifies the wall thickness, which helps installers plan load expectations and choose fastening strategies to suit the leg structure.
• The product is identified by manufacturer part number LEG-28-ZNC-R, giving purchasing and field teams a single reference when reordering the same leg.

Mounting Plate And Screw Hole Layout For Installation

The welded mounting plate on this Reeve table leg measures 3 inches by 4 inches, giving a rectangular footprint for connection to the underside of a top. Four 3/16 inch diameter screw holes in the plate provide specific points for mechanical fastening, so installers can pre-drill tops or jigs to match the plate pattern. Because the plate is welded to the leg, the interface between vertical leg and plate stays fixed, which helps keep legs square to the top once located. The combination of plate size, hole count, and hole diameter gives installers defined geometry to repeat across multiple tables or stations without re-measuring every location.

Using This 28 Inch Satin Zinc Table Leg In Builds

Where This Reeve Table Leg Works Best

This Reeve round steel single table leg is categorized under work surface and table legs, so it is oriented toward supporting horizontal worktops, counters, or tables. The 28 inch height suits table-style and bench-height builds where a standard dimension helps align with adjoining surfaces. With a 1-1/4 inch diameter, the leg offers a compact profile, which can be helpful in tighter layouts where knee space or equipment clearance matters. The satin zinc finish gives the leg a defined appearance, allowing it to be used in open-view applications where legs remain visible under the top. Because glides are sold separately, the bare leg ends in steel, which allows the installer to match the glide style or height adjustment component to the floor conditions and leveling needs of the space.

Details That Support Repeatable Table Construction

The 3 inch by 4 inch mounting plate, welded directly to the leg, creates a fixed reference surface for attaching to the underside of a top, making it easier to repeat leg placement from one unit to the next. Four 3/16 inch diameter screw holes give installers a regular pattern, which can be transferred to templates or drilling fixtures for batch production. The leg is made of cold rolled steel in 16 gauge, pairing a known material with a defined wall thickness, so cutting, drilling, or welding operations can be planned with predictable results. The product is also offered in 6 inch and 28 inch lengths, giving shops a way to use the same basic leg style across both low and standard-height applications. Identifying the part as LEG-28-ZNC-R helps coordinate between purchasing and installation crews, so identical legs are used across a run of tables or stations.

Common Questions About The Reeve LEG-28-ZNC-R Table Leg

Selecting This Reeve Table Leg For Your Project

This Reeve round steel single table leg combines a 28 inch height, 1-1/4 inch diameter, and satin zinc finish with a welded 3 inch by 4 inch plate and four 3/16 inch diameter screw holes, giving you defined geometry for repeatable work surface construction. The cold rolled, 16 gauge steel structure and Reeve LEG-28-ZNC-R part number keep the material and specification consistent from order to installation. For projects needing a standardized leg across multiple tables or benches, this leg provides clear dimensions and mounting details that help align shop planning with field installation.