Reeve 16-gauge steel cabinet leg 6" h x 1" square sat in zinc leg-6-znc

Reeve 16-Gauge Steel Cabinet Leg For Work Surfaces

Reeve 16-gauge steel cabinet leg gives you a 6 inch high, 1 inch square support for cabinets, work surfaces, and tables where a compact steel leg is needed. The leg is made of cold rolled steel, so it provides a solid, uniform section that resists deformation under normal cabinet and light work surface loads. The satin zinc finish covers the leg with a metallic coating that keeps the bare steel away from the environment, which matters in busy shops and interiors where moisture and handling can quickly affect unfinished steel parts. This leg is part of the Reeve Store Equipment Company table legs line, so it matches other Reeve legs in listed finishes and dimensions for consistent appearance on multi-leg runs and banks of cabinets.

Key Reeve Table Leg Details That Matter

• The leg uses 16 gauge cold rolled steel, giving a relatively thick wall that holds shape well in service and lets the welded mounting plate carry cabinet and work surface loads without distortion at the joint.
• The 6 inch height creates a low standoff beneath cabinets or work surfaces, providing practical toe or cleaning space while keeping the overall assembly close to the floor for a solid, furniture-like stance.
• The 1 inch square profile keeps the leg compact in footprint, so it fits under narrow cabinets or tight layouts while still presenting a straight, easy-to-align edge against casework components.
• The welded mounting plate measures 3 inches by 4 inches, creating a broad interface with the underside of the cabinet or top so loads are spread across more material rather than concentrated at a small point.
• The plate has four 3/16 inch diameter screw holes, giving four-point fastening that holds the leg in position and helps resist racking forces when the cabinet or table is pushed or shifted during use.
• The satin zinc finish provides a smooth metallic surface that visually coordinates with other zinc coated components and reduces direct exposure of the cold rolled steel to handling and typical indoor humidity.

Mounting Plate And Screw Hole Layout In Use

This Reeve 16-gauge steel cabinet leg mounts through its welded plate, which is permanently attached to the top of the 1 inch square tube. The 3 inch by 4 inch plate gives you a rectangular mounting footprint that lines up neatly along edges or cross members under cabinets and work surfaces. Four 3/16 inch diameter screw holes are already formed in the plate, so the leg is prepared to accept appropriately sized fasteners without further drilling on the plate itself. Because the plate is welded to the cold rolled steel leg, the load transfer from the cabinet down into the leg remains through a fixed metal joint rather than a loose or adjustable connection.

Using Reeve Satin Zinc Legs In Cabinet Projects

Where This 6 Inch Reeve Cabinet Leg Fits

This Reeve 16-gauge steel cabinet leg is specified at 6 inches in length with a 1 inch square tube, so it naturally fits cabinet and work surface builds that need a modest floor clearance while keeping the overall height controlled. In a run of cabinets or a table frame, multiple 6 inch Reeve legs can be placed at corners and intermediate points, and the 1 inch square profile allows them to sit close to cabinet sides or stretchers without taking much lateral space. The satin zinc finish matches other Reeve legs that are offered in the same satin zinc listing, which helps maintain a unified look when combining different leg heights within the same project or across adjacent installations.

Because the mounting plate is welded directly to the 1 inch square steel tube, the top of the leg presents a flat 3 inch by 4 inch interface ready to sit against the cabinet bottom panel or underside of a top. The four 3/16 inch diameter screw holes in the plate define the fastening pattern, so once their positions are referenced on a cabinet base, each matching leg fixes in a repeatable layout across a production run. Using cold rolled steel for both the tube and the welded connection supports consistent dimensions from leg to leg, which matters when you want aligned cabinet fronts and level work surfaces.

Why The Welded Plate And Gauge Support Results

The use of 16 gauge cold rolled steel in this Reeve cabinet leg gives the tube wall a thickness suited to carrying typical cabinet and work surface loads without excessive flex, which helps keep countertops and case bottoms feeling solid. The welded 3 inch by 4 inch mounting plate ties directly into that steel tube, creating a continuous steel path from the underside of the cabinet down to the floor so the structure behaves as one piece. Four 3/16 inch diameter screw holes at the plate corners or edges establish a stable, wide-based fastener pattern, which resists twisting when cabinets are pushed from the side or when tables are dragged slightly during use.

The satin zinc finish on the leg adds a metallic surface layer distinct from the underlying cold rolled steel, so handling, cleaning, and routine shop exposure act first on the zinc surface rather than on bare steel. That finish also gives a neutral, equipment-style appearance that suits work surfaces, shop tables, and service counters, allowing these Reeve Store Equipment Company legs to blend into professional environments. Because Reeve offers legs in 6, 18, 28, and 36 inch lengths with the same general construction and finish options noted in the description, a shop or installer can keep a consistent leg style across lower cabinets, standard-height tables, and taller work surfaces while choosing the length that suits each application.

Common Questions About This Reeve Cabinet Leg

Select This Reeve Leg For Consistent Cabinet Support

The Reeve 16-gauge steel cabinet leg in satin zinc gives you a 6 inch high, 1 inch square support with a welded 3 inch by 4 inch plate and four 3/16 inch diameter screw holes, so cabinet and work surface loads transfer through a defined steel path. Using this LEG-6-ZNC configuration across a project keeps mounting geometry and visual style consistent, whether you are outfitting a single cabinet or a full run of work surfaces. For cabinet and table builds that specify Reeve Store Equipment Company components, this satin zinc 6 inch leg provides the cold rolled steel structure and mounting layout described for dependable, repeatable installations.