Reeve 16-Gauge Steel Table Leg 6 In Use
Reeve 16-gauge steel table leg 6 in provides a short, rigid support for work surfaces that need a compact, steel-based structure. The table leg is made of cold rolled steel, so the material starts straight and consistent for predictable layout in shop or commercial installations. The leg is 1 inch square, which creates a compact profile that fits tight corners while still presenting solid contact with the floor. The 6 inch height works for low platforms or stepped work surfaces where only a modest rise is needed under cabinets, fixtures, or equipment frames. The black powder coated finish covers the steel with a uniform layer that helps the surface resist wear in normal shop or retail environments. Reeve branding and the LEG-6-BK-16 part number give a specific reference when matching this leg across multiple stations or future orders.
Key Details Of This Reeve Steel Table Leg
- The table leg is made of cold rolled steel, which delivers a consistent section that drills, cuts, and aligns predictably during fabrication and installation.
- The leg is 16 gauge, so the wall thickness supports load-bearing table or work surface frames without adding unnecessary bulk to the structure.
- The leg measures 1 inch square, giving a compact column that fits near walls, gables, or corner panels where space is limited but support is still required.
- The overall leg height is 6 inches, so it lifts a surface just enough for low stands, risers, or tiered counters without creating a tall, open understructure.
- The mounting plate is welded to the leg, creating a fixed joint that keeps the leg and plate aligned when the assembly is attached to the underside of a work surface.
- The mounting plate measures 3 inches by 4 inches, spreading loads over a broader area of the substrate to help reduce localized stress at each mounting point.
- The plate has four 3/16 inch diameter screw holes, giving four-point fastening that helps resist rotation and racking when the table is moved or loaded.
- The leg is finished in black powder coat, providing a dark, uniform appearance that visually blends under many surfaces while also shielding the steel from direct contact.
Mounting Plate And Screw Hole Layout In Use
The welded mounting plate on this Reeve 1 inch square table leg ties the 6 inch column directly to the underside of a surface, so the load path remains stable under typical working conditions. The 3 inch by 4 inch plate size lets the installer spread the connection over more substrate area, which helps the surface resist crushing or pull-through at each leg location. Four 3/16 inch diameter screw holes are set into the plate, allowing a four-corner screw pattern that locks the leg against twisting when the table or platform is bumped or shifted. Because the plate is welded to the cold rolled steel leg, the interface is fixed at the factory, so the installer positions only one integrated component when setting leg locations.
How This 6 Inch Reeve Table Leg Fits Projects
Using The 1 Inch Square Steel Leg On Surfaces
This Reeve 16-gauge steel table leg 6 in works on work surfaces and tables that need a low, fixed rise in the support structure. The 1 inch square profile allows the leg to sit near cabinet sides, returns, or partitions without taking up much lateral space. Cold rolled steel construction means the leg starts with straight edges and uniform dimensions, which helps align multiple legs in a row along a counter or bench. The black powder coated finish allows the leg to visually disappear under dark tops, while still presenting a defined edge where exposed. With a welded 3 inch by 4 inch plate, the leg stays square to the underside of the top, supporting consistent vertical loading.
Why Gauge, Finish, And Plate Design Support Repeatable Results
The 16 gauge wall on this 1 inch square leg provides a balance between strength and profile size, so the same part can be used repeatedly across a run of tables or fixtures. The cold rolled steel material offers a consistent base for the black powder coated finish, which helps the surface maintain a uniform color appearance across multiple legs on the same project. Because the mounting plates are welded to the legs, each LEG-6-BK-16 assembly arrives with the same plate alignment relative to the tube, giving repeatable orientation when laid out along a surface. The four 3/16 inch diameter screw holes in the 3 inch by 4 inch plate remain in the same pattern on every leg, which simplifies drilling operations on tops or frames. This repeatability reduces layout variation from station to station when the same Reeve Store Equipment Company leg is used throughout a workspace.
Common Questions About The LEG-6-BK-16 Table Leg
What material is the Reeve LEG-6-BK-16 table leg made from?
The Reeve LEG-6-BK-16 table leg is made of cold rolled steel, which provides a straight, uniform section that supports stable, predictable performance in table and work surface frames.
How tall and wide is this Reeve steel table leg?
The table leg is 6 inches high and 1 inch square, creating a low, compact vertical support suited to short platforms, risers, or stepped work surfaces.
What is the gauge of the Reeve 1 inch square leg?
The Reeve 1 inch square leg is 16 gauge, giving a wall thickness that supports typical table and work surface loads while keeping the profile relatively slim.
How is the mounting plate configured on this table leg?
The table leg has a welded 3 inch by 4 inch mounting plate with four 3/16 inch diameter screw holes, creating a fixed, four-point mounting interface under the surface.
What finish does the Reeve LEG-6-BK-16 table leg have?
The LEG-6-BK-16 leg has a black powder coated finish, giving a dark, even appearance that covers the cold rolled steel surface on all visible sides.
Who manufactures this 6 inch black steel table leg?
This 6 inch black steel table leg is produced by Reeve Store Equipment Company, providing a specific brand and part number reference for repeat projects.
Selecting This Reeve Leg For Low Work Surfaces
The Reeve 16-gauge steel table leg 6 in with 1 inch square profile and welded 3 inch by 4 inch plate gives a defined support option for low platforms or work surfaces. Cold rolled steel construction and black powder coated finish provide a consistent look across multiple legs on a project. The four 3/16 inch diameter screw holes in the plate support secure attachment under tops or frames at each leg location. When a compact, black Reeve Store Equipment Company leg is needed at a 6 inch height, the LEG-6-BK-16 part number offers a clear, repeatable choice.
