Reeve 16-gauge steel table leg 18" h x 1" square black leg-18-bk-16

Reeve 18 Inch Steel Table Leg For Work Surfaces

Reeve 16-gauge steel table leg 18 in is a cold rolled steel leg designed to support work surfaces and tables where an 18 inch height matches the layout. The 1 inch square profile keeps the footprint compact, which matters when you are fitting legs under cabinets, counters, or tight shop benches. The leg is finished in black using a powder coated process, giving it a uniform look that matches black casework and metal fixtures in commercial or shop environments. The manufacturer specifies a 16 gauge thickness, so the wall of the tube offers more substance than lighter sheet metal, which matters when the leg is carrying regular loads on retail fixtures or work tables. The leg is identified by manufacturer part LEG-18-BK-16, which helps you line up the same component across repeat jobs or when matching legs on an existing installation.

Practical Details That Shape Table Leg Performance

• The table leg is made of cold rolled steel, which provides a consistent surface for the black powder coated finish, helping the leg present cleanly on visible retail or office fixtures.
• The leg uses 16 gauge steel, so the tube wall is thicker than light-gauge stock, supporting repeated use on work surfaces that see regular loading in woodworking or commercial environments.
• The 1 inch square shape keeps the leg visually slim while still providing four flat faces, which simplifies aligning the leg along cabinet edges or metal aprons during layout.
• The welded mounting plate at the top locks the plate position relative to the tube, which keeps the leg square to the surface once it is fastened through the screw holes.
• The leg is finished in black powder coat, so the color runs across the steel and plate in a single tone, helping projects maintain a consistent appearance across multiple legs.
• The overall length is 18 inches, which suits mid-height work surfaces and tables where a lower profile than standard desk height is part of the design.

Mounting Plate And Screw Hole Layout For Installers

The welded mounting plate measures 3 x 4 inches, giving a rectangular footprint that spreads load across more surface area on the underside of the top. Four 3/16 inch diameter screw holes are formed in the plate, providing defined fastener points without drilling through heavy steel on site. Because the plate is welded to the 1 inch square tube, the leg stays aligned with the plate edges, which simplifies orienting the long side of the plate parallel to aprons or cabinet faces. The fixed geometry between the 18 inch leg and the mounting plate means each leg registers the same, which matters when you are lining up multiple legs on one panel and want the finished heights to match.

Using This Reeve Table Leg In Real Projects

Where This 18 Inch Reeve Steel Table Leg Fits Best

This Reeve Store Equipment table leg sits in the work surface and tables class, so it is intended for supporting tops in woodworking, retail, and shop settings. At 18 inches high, the leg works for lower workstations, bench seats, or intermediate shelves under full-height counters where a standard 28 or 36 inch leg would be too tall. The 1 inch square form factor keeps it appropriate for narrow tops or compact fixtures where larger tubing would crowd the design. Because the mounting plate is 3 x 4 inches, installers can fasten it to solid wood tops, laminated panels, or metal frames that provide a flat pad within those dimensions, helping the leg serve as a straightforward support in many layout styles.

Why The 1 Inch Square, 16 Gauge Design Supports Repeatable Results

The combination of 1 inch square tubing and 16 gauge cold rolled steel gives the leg a predictable outside dimension and wall thickness, which helps when fabricating jigs or drilling patterns that will be reused across jobs. The welded 3 x 4 inch mounting plate with four 3/16 inch screw holes keeps the fastener pattern identical from leg to leg, so tops can be pre-drilled using that footprint and then fitted with multiple legs in a consistent sequence. The black powder coated finish runs over both the tube and plate, so installers do not need to address raw steel at the joint, which saves finishing steps once the leg is bolted to the work surface. With the manufacturer part number LEG-18-BK-16 clearly defining this 18 inch black version, ordering repeat quantities for matching fixtures stays straightforward when rolling out a design across several locations.

Common Questions About This Reeve Steel Table Leg

Selecting This Reeve Leg For Your Next Install

This Reeve 16-gauge steel table leg 18 in combines a 1 inch square tube, welded 3 x 4 inch plate, and black powder coated finish to support low-height work surfaces with a consistent footprint. For projects that call for matching legs across multiple fixtures, the defined 18 inch length, 16 gauge cold rolled construction, and part number LEG-18-BK-16 give you a clearly specified component to use wherever this height and look are required.