Reeve square steel single table leg 1" dia.x 28" h sat in zinc leg-28-znc

Reeve Square Steel Single Table Leg For Work Surfaces

Reeve square steel single table leg is a cold rolled steel leg designed to support work surfaces and tables where a straight, square profile is preferred. The 1 inch square shape creates a compact footprint that fits under narrow tops while still providing a defined edge for layout. The 28 inch height matches common table and work surface heights, which helps keep projects level with surrounding benches and cabinetry. The satin zinc finish gives the leg a neutral metallic look that suits a range of shop, office, or light commercial interiors without drawing attention away from the surface. The leg is built from 16 gauge steel, so the wall thickness is set for typical table applications where a balance of strength and manageable weight is important. Branded by Reeve Store Equipment Company, it ties into a line of coordinated table legs used across work surface and table installations.

Key Reeve Table Leg Details For Projects

• The table leg is made of cold rolled steel, which provides a consistent, smooth surface that accepts the satin zinc finish cleanly for a uniform appearance on exposed table bases.
• The welded mounting plate on the leg creates a fixed interface between leg and plate, reducing movement at the joint and helping tables feel solid under load.
• The 3 inch by 4 inch mounting plate size spreads load across a broader area of the underside, which helps the top resist localized stress at each leg position.
• Four 3/16 inch diameter screw holes in the plate give a defined fastening pattern, helping installers line up fasteners and achieve repeatable leg placement on multiple units.
• The 1 inch square leg profile keeps the support visually light while still giving a defined corner, which can simplify aligning legs to edges or aprons during layout.
• The satin zinc finish provides a clean metallic look that coordinates with other zinc-toned components in shops, offices, or light commercial spaces.

Mounting Plate And Screw Hole Layout For Installation

This Reeve Store Equipment Company leg uses a welded mounting plate that is permanently attached to the steel tube, so installers work with a single integrated piece during layout. The plate measures 3 inches by 4 inches, giving a rectangular footprint that can be oriented along the length or width of a top to suit the structure underneath. Four 3/16 inch diameter screw holes are pre-formed in the plate, defining where fasteners sit and saving layout time on repetitive assemblies. Because the holes are sized at 3/16 inch diameter, fastener selection can be matched to that clearance, which helps achieve consistent clamping of the plate to the underside of the top. The cold rolled steel construction around the plate keeps the contact area flat, helping the plate seat evenly against the mounting surface.

Using The LEG-28-ZNC Table Leg In Work Surfaces

Where This 28 Inch Reeve Table Leg Fits Best

The LEG-28-ZNC table leg is specified at 28 inches in height, which aligns with many standard table and work surface designs used in shops and offices. The 1 inch square profile suits installations where a straight, linear look under the top is preferred instead of a tapered or turned leg. Because the leg is categorized as a table leg in the Work Surface & Tables class, it slots naturally into new workbenches, desks, and light-duty assembly tables built around that height. The satin zinc finish presents a neutral metallic tone that works in spaces where exposed supports are visible but not intended to be a design focal point. In multi-station layouts using several identical tables, the consistent finish and square profile help keep the row of work surfaces visually aligned.

Why The Welded Plate And Steel Gauge Support Results

The leg is made from cold rolled steel in a 16 gauge thickness, and this controlled wall thickness supports predictable behavior when the table is loaded in normal use. The welded mounting plate creates a single structural unit, reducing relative movement between leg and plate compared with separate components. This helps the table feel stable when weight is applied near corners or edges supported by the legs. With the plate sized at 3 inches by 4 inches, each leg transfers load into a broader section of the underside rather than concentrating force in a narrow strip, which is useful on tops where fastener bite is limited to specific areas. The four 3/16 inch diameter screw holes set a defined pattern, so an installer can repeat hole positions across multiple tops, improving consistency when assembling sets of tables or aligning legs with underlying frames. Together, the square tube, welded plate, and satin zinc finish provide a leg that combines a clean appearance with a predictable mounting interface for repeatable builds.

Common Questions About The Reeve 1 Inch Square Leg

Selecting The LEG-28-ZNC Leg For Your Table Build

The Reeve square steel single table leg in satin zinc brings together a 1 inch square profile, 28 inch height, and welded mounting plate to support practical table builds. The 3 inch by 4 inch plate with four 3/16 inch diameter screw holes offers a clear fastening pattern, which is useful when repeating layouts across several tops. With cold rolled 16 gauge steel and a neutral satin zinc finish, this leg suits work surfaces and tables that need straightforward support and a consistent appearance. For projects built around standard table heights and square, linear underframes, this LEG-28-ZNC configuration aligns table structure with a defined mounting interface.