Reeve square steel single table leg 1" dia.x 28" h black leg-28-bk-16

Reeve Square Steel Single Table Leg For Work

Reeve square steel single table leg gives a 1 inch square, 28 inch high support point, so a work surface or table can be built to a consistent height using a compact steel profile. The leg is made of cold rolled steel, which provides a dense, uniform material so welded joints and screw-driven connections remain stable under normal use. The black finish is powder coated, so the color is baked on and resists typical shop scuffs in woodworking or commercial environments. The leg is part of the Reeve Store Equipment Company line, so it aligns with other Reeve components on a job. As a single leg, it can be paired with other structural elements to support corners or free-standing ends where a square profile is preferred for layout.

Key Reeve Table Leg Details For Jobs

• The 1 inch square profile helps layouts where a compact, consistent leg shape keeps corners tight and leaves more open space under the surface for storage or equipment movement.
• The 28 inch height matches common work surface heights, so installers can build tables or counters that line up with adjacent cabinets or existing workstations.
• The leg is made of cold rolled steel, giving a solid base that works well with welded mounting plates in typical shop, office, or light commercial applications.
• The black powder coated finish provides an even color that can visually match dark tops or frames while handling normal contact in traffic areas.
• The Manufacturer Part # LEG-28-BK-16 identifies this exact 28 inch black 16 gauge leg, simplifying reorders or matching legs across multiple stations on a project.

Mounting Plate And Screw Interface Details

Each Reeve square steel single table leg has a mounting plate welded to the leg, so the plate and tube act as one piece when fastened to a work surface. The plate measures 3 inches by 4 inches, giving a broad footprint that spreads load across more of the underside of the top. Four 3/16 inch diameter screw holes are formed in the plate, so installers have a defined pattern for driving fasteners into typical wood or composite tops. With the welded plate and pre-formed holes, layout is straightforward: position the plate, drive the fasteners through the 3/16 inch holes, and the leg seats tight against the underside of the work surface without separate brackets.

Using This Reeve Table Leg In Real Projects

Where A 1 Inch Square 28 Inch Leg Fits

This Reeve square steel single table leg works in work surface and table builds where a 28 inch height matches the design. The 1 inch square tube suits layouts that favor a slim, straight profile, such as office tables, shop benches with front clearance, or light workstations. Because the plate is 3 inches by 4 inches, it fits many substrate widths without overhang, which helps when tying into narrow rails or the edge of a laminated top. The black powder coated finish lets the leg visually recede under darker tops, which is useful in retail or commercial spaces where hardware should stay unobtrusive but functional. Installers working with multiple leg lengths in the Reeve line can choose this 28 inch version when the goal is a standard seated-height surface.

Details That Support Consistent Table Results

The welded mounting plate on the Reeve square steel single table leg removes a joint between plate and tube, so there is one rigid assembly that resists twist when the table is moved. Four 3/16 inch diameter screw holes set a repeatable pattern, which helps when building runs of identical tables because each leg seats in the same relative position. The cold rolled steel material works well with the welded plate, giving clean welds and a uniform bearing surface under the top. The 1 inch square section keeps all legs the same footprint at the floor and under the top, so alignment along edges is simple on repetitive installations. The 28 inch height simplifies planning when matching an existing standard-height work area, reducing layout time for multi-station jobs.

Common Questions About This Reeve Table Leg

Selecting This Black Table Leg For Your Job

The Reeve square steel single table leg combines 1 inch square cold rolled steel, a welded 3 inch by 4 inch plate, and four 3/16 inch screw holes, so it offers a defined way to support 28 inch high work surfaces. The black powder coated finish fits projects where dark, low-visibility support is preferred under tops. For jobs needing a repeatable leg solution with a known part number, LEG-28-BK-16 provides a clear reference for planning quantities and matching legs across an installation. Add this leg to your layout when a square, welded-plate Reeve support matches the design and height targets.