Reeve 16-gauge steel table leg 18" h x 1" square sat in zinc leg-18-znc

Reeve 16-Gauge Steel Table Leg 18 For Work Surfaces

Reeve 16-gauge steel table leg 18 is an 18 inch high, 1 inch square table leg designed for building or supporting work surfaces and tables. The leg is made of cold rolled steel, which provides a solid steel structure for stable support under typical work surface loads. A satin zinc finish on the leg presents a clean metallic look that suits commercial, shop, or utility environments where a straightforward appearance is important. This model is part of the Reeve Store Equipment Company table leg line, so it aligns with their work surface and table hardware system. The leg is identified by manufacturer part number LEG-18-ZNC, which ties directly to the 18 inch height and satin zinc finish for consistent reordering. As a table leg, it fits into work surface and tables applications where a straight, square profile is preferred.

Key Details That Matter For Table Projects

• The leg is made of cold rolled steel, which delivers a solid metal section that helps a table or work surface feel firm under normal use and resists flexing in typical shop and commercial settings.
• The tube is 1 inch square, giving a compact profile that fits tight layouts while still offering a defined corner edge that aligns neatly with square table frames and straight apron designs.
• The leg height is 18 inches, which suits low work surfaces or bench levels where a shorter support is needed, such as auxiliary tables or stepped work areas in a shop.
• The finish is satin zinc, providing a consistent metallic appearance that coordinates with other zinc-coated hardware and helps maintain a uniform look across multiple tables.
• The product belongs to the Work Surface & Tables category and the Table Legs product class, so its geometry and build match applications where discrete, stand-alone leg supports are required.

Mounting Plate Welded For Direct Leg Attachment

Each Reeve steel table leg uses a mounting plate welded directly to the leg, creating a fixed junction that keeps the leg and plate aligned during installation. The plate measures 3 inches by 4 inches, so it spreads the loading footprint against the underside of the work surface or table structure. The plate has four 3/16 inch diameter screw holes, providing multiple fastener points so the leg can be secured at all four corners of the plate. Because the plate is welded to the 1 inch square tube, the leg location stays consistent from project to project, which supports repeatable layouts along a run of tables or workstations.

Using This Reeve Table Leg In Workstations

Square Satin Zinc Leg For Work Surfaces

This Reeve Store Equipment Company leg is specified as an 18 inch high, 1 inch square component within the Work Surface & Tables category, so it is intended to serve as a primary support under tables or similar tops. The cold rolled steel construction gives the square tube a dense, uniform wall that helps the leg carry typical vertical loads in workshops, service counters, or utility benches. With its satin zinc finish, the leg presents a consistent tone that fits where visible metal supports are acceptable, such as open workstations or storage tables. Because Reeve offers legs in multiple lengths, the 18 inch size can be used in stepped-height layouts where different surfaces are set at varying working levels. The square profile also makes it straightforward to align the leg faces parallel with table edges, which can be important when legs are visible along the front of a run.

Welded Plate And Hole Layout For Repeatable Installs

The welded 3 inch by 4 inch mounting plate on this leg provides a fixed interface that keeps the tube square to the surface during installation, which helps maintain consistent leg plumb from one unit to the next. Four 3/16 inch diameter screw holes in the plate define a regular fastener pattern, so installers can repeat the same drilling layout on multiple tops without reworking measurements. Because the plate is attached at the factory, there is no separate alignment step between tube and plate, which simplifies the workflow when setting multiple legs on a job. Identifying this leg by manufacturer part number LEG-18-ZNC gives a precise reference to the 18 inch height, 1 inch square format, satin zinc finish, and welded plate configuration, supporting consistent replacement or expansion of existing table runs built with the same line.

Installer Questions About This Reeve Table Leg

Select This Leg For Steel Work Surface Support

The Reeve 16-gauge steel table leg 18 combines an 18 inch high, 1 inch square cold rolled steel tube with a welded 3 inch by 4 inch mounting plate, giving a defined interface for building or extending work surfaces. Its satin zinc finish and fixed hole pattern help repeat projects with consistent appearance and alignment. For table builds that rely on Reeve Store Equipment Company components, this LEG-18-ZNC model provides a clear, cataloged choice when a compact, low-height steel support is required.