Reeve square steel single table leg 1" dia.x 36" h black leg-36-bk-16

Reeve Square Steel Single Table Leg For Work Surfaces

Reeve square steel single table leg is a 1 inch square, 36 inch high leg made from cold rolled steel, so it supports a typical work surface or table while keeping dimensions consistent from leg to leg. The leg is finished in black, described as a powder coated option, which helps the leg visually disappear under darker casework or tops while providing a uniform surface for everyday shop or commercial environments. The leg is part of Reeve's table legs line in the work surface and tables category, which keeps it aligned with common shop-built tops and fixtures. The single-leg format works wherever an installer or fabricator needs a straightforward vertical support under a corner or edge of a work surface. The 16 gauge construction noted in the description describes the steel thickness, which matters when planning for repeated everyday use.

Key Reeve Table Leg Details That Help On Site

• The table leg is made of cold rolled steel, which provides a consistent, straight section that simplifies layout when aligning multiple legs under a shared work surface or table top in a shop or job setting.
• The 1 inch square profile gives a predictable footprint at the floor and mounting point, which helps when laying out corners, clearances, and skirting details around the perimeter of cabinets or frames.
• The leg length is 36 inches, so it targets common stand-up work surface or table heights once a typical top thickness is added, reducing custom cutting in many standard bench or table builds.
• The black finish is described as a powder coated option in the Reeve line, so this color choice supports darker design schemes and helps the leg blend with other black components in a workspace.
• The leg is part of a family that exists in 6, 18, 28, and 36 inch lengths, which helps shops standardize on one style across different height applications while keeping a similar visual and structural theme.
• Glides are sold separately, a detail that allows installers to choose specific glide solutions based on floor type or adjustment requirements at the job location.

Mounting Plate And Screw Hole Layout For Installation

Each Reeve table leg has a mounting plate welded to the top of the leg, so the plate and tube act as a single unit during installation, reducing movement at the connection point. The plate is 3 inches by 4 inches, which creates a defined mounting footprint to spread load into the underside of the work surface or table frame. Four 3/16 inch diameter screw holes are provided in the plate, giving a clear fastening pattern that fits many common wood screw sizes for securing into wood or composite substrates. The welded plate design saves fabrication time because there is no separate bracket to align, and the rectangular plate shape makes it easier to orient legs consistently along edges or corners.

Using The Reeve 36 Inch Black Table Leg In Projects

Where This 1 Inch Square Steel Table Leg Fits Best

This Reeve 1 inch square steel table leg is suited to work surfaces and tables where a 36 inch high support is needed under a top, which aligns with many bench-height and counter-height builds once top thickness is considered. Its square profile helps when legs align alongside cabinet ends, rails, or simple frames, because the straight sides sit neatly against flat surfaces. The cold rolled steel construction gives a uniform, straight member, which supports cleaner lines on open-leg tables or island-style workstations. Within the Reeve table legs range, this leg occupies the taller end compared with the 6, 18, and 28 inch options, so it can match other pieces in the same line when projects combine seated and standing-height stations. The black powder coated finish option is useful in environments where dark casework, black hardware, or dark flooring dominate, creating a consistent appearance under the top and along the room perimeter.

Why Welded Plate And Hole Layout Support Repeatable Results

The welded mounting plate on the Reeve table leg creates a fixed relationship between the 1 inch square tube and the 3 by 4 inch plate, which helps installers repeat the same offset from edges on each leg without adjusting separate brackets. Because the plate has four 3/16 inch diameter screw holes, the fastener pattern is predetermined, which reduces layout time and gives a predictable clamping area on the underside of the work surface or support frame. The rectangular 3 by 4 inch plate shape makes orientation straightforward, so legs can be positioned with the longer dimension parallel or perpendicular to an edge depending on the direction of expected load. The 16 gauge description signals the wall thickness of the steel leg in this Reeve model, which is helpful when matching leg strength expectations across the 6, 18, 28, and 36 inch length family. Across multiple installations, these consistent details help fabricators and installers repeat their layout jigs, drilling patterns, and assembly steps from bench to bench or table to table.

Common Questions About This Reeve Table Leg

Selecting This Reeve Table Leg For Your Next Build

The Reeve square steel single table leg in 1 inch square by 36 inch high cold rolled steel with a black finish offers a straightforward solution for supporting work surfaces and tables. Its welded 3 by 4 inch mounting plate with four 3/16 inch diameter screw holes simplifies fastening into wood or similar tops, helping keep installation steps predictable from job to job. With 16 gauge construction and membership in a family of 6, 18, 28, and 36 inch lengths, this leg lets shops and installers keep a consistent look while meeting different height requirements. For projects calling for a black, square steel support at bench height, this Reeve LEG-36-BK-16 table leg provides a clear, specification-driven option to integrate into your next work surface layout.