Kuehn Bevel edge moldings in the Carrara Envision Matte pattern create a defined laminate countertop edge that visually finishes the run and sets a clear boundary at the front. The Type 1 7494 profile is a laminate edge molding style designed to work with laminate countertops, so the molding matches that application rather than general-purpose trim. The 12 foot length spans longer counter sections in one continuous piece, which reduces joints along the edge and helps keep the visual line consistent. The 1-9/16 inch width gives coverage from the deck edge toward the face, so the molding can visually bridge the transition at the front of the laminate top. The 5/16 inch thickness provides a substantial face for the bevel detail, supporting a pronounced edge appearance instead of a thin strip look.
The 12 foot overall length lets installers plan cuts so joints fall at corners or less visible points, which supports cleaner visual breaks along laminate countertops. The 1-9/16 inch width defines how far the molding reaches from the laminate deck toward the front, helping layout decisions for overhang, nose position, and face reveal. With a 5/16 inch thickness, the molding offers a consistent dimension to register tools against when trimming or aligning to the laminate surface. Because this product is a laminate edge molding, fabricators can treat it as the finished trim element at the countertop front, integrating it into the normal laminate fabrication workflow rather than adapting generic trim stock.
This Kuehn Bevel edge molding is part of a family of 14 bevel and backsplash product types engineered for laminate countertops, so it fits naturally into laminate shop processes focused on those tops. The Type 1 7494 configuration is a specific variant within that family, giving a consistent profile choice when multiple counters on the same project need the same edge look. Carrara Envision Matte coloring lets installers match projects that use that pattern on laminate surfaces, aligning the edge treatment with the chosen decor scheme. As a laminate edge molding, this piece functions at the counter perimeter rather than in cabinet carcasses, so it suits installations where the laminate deck is already part of the plan.
The Type 1 profile designation means this molding shares a known geometry that Kuehn Bevel repeats across that product type, helping shops standardize jigs and setups around that edge style. Being part of Kuehn Bevels laminate edge moldings class ties this product directly to laminate countertop work, streamlining ordering decisions when a bevel edge is required instead of a square band. The 12 foot length provides room to nest multiple finished pieces from one stick, which can reduce offcut waste on average-size counters while keeping the visible seams to a minimum. The 1-9/16 inch width and 5/16 inch thickness give predictable dimensions for saw settings and edge alignment, which supports repeatable cuts and reduces rework from mis-sized edges.
The KB TYPE 1 7494-58 molding is a Kuehn Bevel laminate edge molding, so it serves as the decorative and functional finishing edge on laminate countertops using that specific profile.
Each Kuehn Bevel Carrara Envision Matte Type 1 molding is 12 feet long, which helps span most countertop runs with fewer joints and provides stock for multiple cut lengths from one piece.
This laminate edge molding measures 12 feet in length, 1-9/16 inches in width, and 5/16 inch in thickness, giving installers defined sizing for layout, cutting, and edge alignment work.
Kuehn Bevel products are made of moisture resistant MDF, so the molding core is engineered to handle typical moisture exposure conditions around laminate countertop installations in normal use.
The Carrara Envision Matte design provides a specific decorative pattern at the counter edge, helping align the molding appearance with matching laminate surfaces and maintaining a unified visual scheme on the job.
Type 1 is one of 14 different Kuehn Bevel bevel and backsplash product types, giving shops a defined edge style choice within a broader system of profiles for laminate countertops.
Choosing this Kuehn Bevel edge molding in Carrara Envision Matte gives you a laminate edge component sized at 12 feet by 1-9/16 inches by 5/16 inch, ready to match laminate countertop projects using that pattern. The moisture resistant MDF construction aligns with Kuehn Bevels approach to edge moldings for laminate work. The Type 1 7494 designation connects this piece to a specific profile within their 14-style lineup, supporting repeatable results across multiple counters. For laminate-focused shops and installers, this molding provides a defined option when a bevel-style laminate edge is required on new work or matching jobs.
Sold In: 1 Each