Kuehn Bevel Edge Moldings in Sand Crystal Matte give laminate countertops a finished beveled edge using a dedicated molding profile, so you can match surfaces and edges for a consistent look on jobs using laminate. This Type 1 3517 molding is part of Kuehn Bevels laminate edge moldings line, so it is designed to work as a decorative edge solution in laminate countertop projects. The 12 foot length lets you run long stretches of countertop edge in one piece, which reduces joints along the front edge. The 1-9/16 inch width and 5/16 inch thickness define the molding face and depth, guiding layout, cutting, and profile alignment along the countertop front.
This Kuehn Bevel Type 1 3517 molding measures 12 feet long by 1-9/16 inches wide by 5/16 inch thick, so those fixed dimensions guide your cutting list and edge layout. The 12 foot span supports long straight countertop edges before cutting to size. The 1-9/16 inch width lets you plan the reveal and face coverage against the laminate top. The 5/16 inch thickness defines the build at the front edge, so you can coordinate the edge profile with the countertop substrate and laminate overlay during fabrication.
This Kuehn Bevel edge molding is a laminate edge molding intended for decorative laminate countertop applications, so it fits projects where you are finishing the front edge of laminate tops. Kuehn Bevel manufactures this as one of 14 different styles of bevel and backsplash product types designed to be used with laminate countertops, which places it squarely in laminate kitchen, bath, or work-surface fabrication. Being part of the Type 1 design family means it aligns with Kuehn Bevels Type 1 bevel edge profile, so it suits jobs already laid out for that profile. The Sand Crystal Matte finish targets projects using Sand Crystal matte laminate, so color and sheen can be coordinated from deck to edge within the same job.
This molding is part of Kuehn Bevels laminate edge moldings, so it is purpose-built to finish laminate countertop edges in a consistent, repeatable way across similar projects. The Type 1 3517 designation ties the profile and color together, which helps you reorder the same edge for future work without requalifying a profile. Kuehn Bevel products are made of moisture resistant MDF, so the core material is designed for use in environments where laminate countertops are common and occasional moisture contact can occur. The 12 foot length gives predictable stock for cutting multiple pieces from a single stick, supporting efficient layout on site or in the shop. The defined 1-9/16 inch by 5/16 inch cross section gives a consistent edge geometry, which helps reduce on-site adjustment when you repeat the same build on multiple tops.
The KB TYPE 1 3517-58 is a Kuehn Bevel laminate edge molding in the Type 1 3517 profile, so it serves as a decorative beveled edge for laminate countertops.
The Kuehn Bevel Sand Crystal Matte molding measures 12 feet long by 1-9/16 inches wide by 5/16 inch thick, so these dimensions guide layout, cutting, and edge build-up planning.
Kuehn Bevel products are made of moisture resistant MDF, so the core is suited to typical laminate countertop environments where occasional moisture contact may occur.
This Kuehn Bevel laminate edge molding is designed to be used with laminate countertops, so it finishes the front edge with a matched bevel and Sand Crystal Matte appearance.
Type 1 3517 identifies a specific Kuehn Bevel edge style and color, so you can repeatedly select the same bevel profile and Sand Crystal Matte finish for matching jobs.
Kuehn Bevel manufactures 14 different styles of bevel and backsplash product types for laminate countertops, and this Type 1 3517 molding is one of those coordinated options.
The Kuehn Bevel Edge Moldings Type 1 3517 in Sand Crystal Matte provides a defined 12 foot by 1-9/16 inch by 5/16 inch laminate edge solution, so you can plan clean, consistent front edges on laminate countertops. The moisture resistant MDF core and laminate edge molding design align this part with real-world laminate countertop work. When a project calls for a Sand Crystal Matte finish and a Type 1 bevel, this specific KB TYPE 1 3517-58 molding lets you match color, profile, and dimensions across the run.
Sold In: 1 Each