Kuehn Bevel edge moldings in the Sand Crystal Etchings design provide a decorative laminate edge solution for laminate countertops, so installers can match the countertop style while finishing exposed front edges with a consistent look. This Type 1 3517 profile is part of Kuehn Bevels bevel and backsplash product types designed to be used with laminate countertops, giving shops a repeatable profile when laying out runs on standard kitchen or bath projects. The molding measures 12 feet long by 1-9/16 inch by 5/16 inch, so one length spans typical base cabinet runs and provides enough height and thickness to cover the laminate build and substrate cleanly. The product is classified as laminate edge moldings, which aligns it with standard laminate surfacing practices on wood-based substrates. Kuehn Bevel manufactures this molding for use where a bevel-style decorative front edge is preferred over a square or self-edge treatment.
This laminate edge molding is specified at 12 feet in length, which allows long, continuous runs along base cabinets and islands, reducing the number of field joints in the visible front edge. The 1-9/16 inch face dimension provides coverage from the top surface down the front of a typical laminate countertop build, so the decorative profile can be aligned with common substrate thicknesses and overhangs. At 5/16 inch thick, the molding has a defined build that pairs with laminate surfacing practices on moisture resistant MDF or other wood-based cores, supporting a consistent reveal from piece to piece. The Type 1 designation identifies the profile family within Kuehn Bevels laminate edge moldings, giving fabricators a clear reference when matching existing installations or repeating a successful detail on new counters.
This Kuehn Bevel Type 1 3517 Sand Crystal Etchings molding is designed to be used with laminate countertops, so it is suited to residential or commercial laminate work where a decorative bevel is desired along the front edge. As a laminate edge molding within the decorative edge moldings category, it occupies the transition zone between the horizontal laminate surface and the vertical front exposure, helping define the finished look at counter fronts. The 12 foot length means it works well on standard kitchen runs, longer commercial tops, or combined sections where continuous appearance is a priority. Being part of Kuehn Bevels system of bevel and backsplash product types, it fits into projects that use matching or coordinated components at the rear edge or wall side, supporting a cohesive laminate installation.
Kuehn Bevel products are made of moisture resistant MDF, which gives this Type 1 3517 molding a core material suited to typical kitchen and bath environments where humidity and occasional moisture are present around laminate countertops. Using moisture resistant MDF in a laminate edge molding helps the profile maintain its shape and integrity when bonded to laminate surfaces in these settings, supporting a stable front edge over time. The MDF core works with standard woodworking tools and laminate fabrication methods, so shops can cut, miter, and fit the molding as part of their normal countertop workflow on moisture resistant MDF or other compatible substrates. Within laminate edge moldings, this material choice ties the decorative front piece to the same general material family used under many laminate tops, promoting uniform behavior across the assembly.
The Kuehn Bevel Type 1 3517 molding is a laminate edge molding in the decorative edge moldings category, so it serves as a finished front edge piece for laminate countertops.
The Sand Crystal Etchings molding is 12 feet long by 1-9/16 inch high by 5/16 inch thick, allowing long runs and coverage for typical laminate countertop front edges.
Kuehn Bevel products are made of moisture resistant MDF, supporting laminate countertop applications in kitchen and bath environments where humidity is common.
This Type 1 bevel edge molding is designed to be used with laminate countertops, providing a decorative front edge that transitions from the laminate surface to the vertical face.
The Type 1 designation identifies this molding as part of Kuehn Bevels Type 1 bevel profile family, which helps fabricators reference and repeat the same edge style.
The Sand Crystal Etchings design aligns with stocked Formica and Wilsonart color offerings, supporting coordinated countertop and edge appearance on laminate projects.
This Kuehn Bevel edge molding in Sand Crystal Etchings gives laminate countertop projects a defined Type 1 bevel profile, so installers can align the decorative front edge with the chosen laminate color and core construction. With a 12 foot length and a 1-9/16 inch by 5/16 inch section, it fits straightforwardly into laminate countertop runs that use moisture resistant MDF or similar substrates. Selecting the KB TYPE 1 3517-46 molding ties your job to Kuehn Bevels laminate edge moldings system, supporting consistent appearance from one installation to the next.
Sold In: 1 Each