Kuehn Bevel edge moldings provide a finished decorative edge for laminate countertops by matching common laminate colors and profiles, so installers can carry the visual design from the deck through the front edge in one continuous look. This laminate edge molding is identified as Type 1 6227, which defines a specific bevel style that coordinates with Kuehn Bevels Type 1 product family, helping maintain consistency across projects using the same profile. The Amber Kashmire Etchings color ties into regularly stocked Formica and Wilsonart laminate colors, so the molding integrates with those surfaces for a coordinated appearance on residential or commercial tops. The molding measures 12 feet long, which lets installers run extended counter sections with fewer joints to fill or align. The 1-9/16 inch by 5/16 inch size sets the visible face and thickness, guiding layout, edge build-up, and machining steps.
This Kuehn Bevel edge molding is specified at 12 feet in length, which supports long straight runs on laminate countertops and reduces the number of edge seams that need alignment and finishing. The 1-9/16 inch dimension sets the overall face coverage at the countertop edge, guiding how far the molding will extend from deck to underside build-up in typical laminate constructions. The 5/16 inch thickness defines how the molding nests against the substrate and adjacent laminate, affecting routing depth, adhesive coverage, and transition to the deck surface. As a laminate edge molding, it is intended to pair with laminate countertops so the profile and scale feel proportional to standard tops in kitchen, bath, or workroom layouts.
The Type 1 bevel edge molding matches Kuehn Bevels Type 1 bevel style, so it fits projects already using that profile on other runs or future additions, keeping a consistent edge line across all visible sides. As a laminate edge molding for countertops, it is suited to front edges where a defined bevel detail is desired, giving the transition between horizontal laminate and vertical face a crisp, uniform profile. The Amber Kashmire Etchings color supports installations using coordinated Formica or Wilsonart laminates in similar tones, helping designers and fabricators carry a continuous color story from the top surface through the edge. Because the molding is part of Kuehn Bevels laminate edge moldings class, it aligns with typical countertop fabrication workflows that are already set up for laminate decks, substrate build-ups, and edge profiling.
The 12 foot length of this molding allows many standard countertop sections to be run in a single piece, which reduces layout time devoted to locating joints and helps keep the visual grain or pattern running smoothly along the edge. The 1-9/16 inch height gives fabricators a predictable coverage zone for the front edge, so build-up strips and substrate sizing can be planned so the bevel lands where expected relative to the deck laminate. With a 5/16 inch thickness, the molding presents a substantial yet manageable edge, influencing router bit selection and adhesive spread so the profile blends cleanly to the laminate surface. The moisture resistant MDF core supports normal countertop use where cleaning and occasional splashes occur, providing an appropriate base under the decorative surface in kitchen, bath, and utility spaces. Being identified by manufacturer part 6227-46-T1, the molding can be reordered accurately, which helps shops match previous installations or service existing tops with the same profile and color.
The Kuehn Bevel edge moldings are specified at 12 feet long, which supports long countertop runs and reduces the number of seams that need alignment along the front edge.
The Amber Kashmire molding is made of moisture resistant MDF, giving the edge a stable core suited to typical countertop environments with routine cleaning and moisture contact.
The Type 1 6227 bevel edge measures 1-9/16 inches wide by 5/16 inch thick, which guides edge build-up height, routing depth, and how the bevel meets the laminate surface.
This laminate edge molding is designed for laminate countertops, so it works on kitchen, bath, or work surfaces where a decorative bevel profile is desired at the front edge.
The Amber Kashmire Etchings color aligns with regularly stocked Formica and Wilsonart colors, helping fabricators coordinate the edge with matching laminate tops on projects.
The Type 1 designation identifies a specific Kuehn Bevel bevel edge style, so using Type 1 keeps the edge profile consistent across multiple sections or future matching work.
Kuehn Bevel edge moldings in the Type 1 6227 Amber Kashmire Etchings profile give shops a defined laminate edge solution built around 12 foot lengths, moisture resistant MDF, and a color tuned to popular laminates. Those verified details support planning, fabrication, and repeat work where a consistent bevel style and appearance are required across multiple laminate countertop installations.
Sold In: 1 Each