Kuehn Bevel edge moldings in the KURV 4 Series Type 1 1879 Trinidad Lapidus Mirage profile provide a laminate edge molding solution sized at 12 feet x 1-9/16 inches x 5/16 inch, so long, consistent runs match a planned layout. This laminate edge molding is part of Kuehn Bevel decorative edge moldings, so the profile is purpose-shaped for visible edges rather than rough substrate transitions. The standard KURV 4 subtle double Kurv shape forms a soft bullnose, which helps reduce sharp edges on exposed laminate surfaces where hands frequently pass. Moisture resistant MDF construction supports use in typical woodworking environments where occasional moisture contact can occur at countertop or trim edges. The molded bevel detail is factory-formed, so installers work with a repeatable profile instead of building up and shaping edges on site.
The 12 foot length of this Kuehn Bevel edge molding lets installers span long runs with fewer joints, which reduces layout time around seams. The 1-9/16 inch width gives enough face to cover standard substrate thicknesses while leaving room to align the KURV 4 profile visually with adjacent surfaces. A 5/16 inch thickness provides a substantial molding body, which helps the profile maintain shape along straight sections and gentle transitions. The subtle double Kurv soft bullnose is formed into the piece, so routing or complex shaping is not part of the edge work and installers can focus on straight, accurate cuts and adhesive application.
This KURV 4 Series Type 1 1879 Trinidad Lapidus Mirage molding works as a laminate edge molding wherever a decorative edge is needed alongside laminate, solid surfaces, or wood, so one profile can move from counters to trim. Its role as part of laminate edge moldings means it is designed to finish exposed sheet edges rather than field surfaces, which supports use on worktops, shelving fronts, or panel perimeters. The ability to serve as decorative backsplash, baseboard molding, or chair rail allows one color and profile to repeat along walls and casework for a coordinated appearance. Using moisture resistant MDF as the molding core supports installation in typical interior spaces where edges may see routine cleaning and light splashes around counters or wall trim.
The seamless one piece molding design with soft eased curves at the beveled points gives a continuous sculpted edge, which simplifies alignment because there are no joints interrupting the profile along a straight run. The stocked KURV 4 subtle double Kurv soft bullnose is a consistent factory shape, so multiple sticks share the same contour, helping mitered corners and returns meet cleanly. Creating matching or contrasting edges in laminate, solid surfaces, or wood removes the brown seams visible in today's product, which can otherwise draw attention to joints at the edge. The defined 12 foot x 1-9/16 inch x 5/16 inch dimensions give installers clear starting measurements, reducing layout guesswork when planning cuts, corners, and transitions between horizontal and vertical runs on the same job.
The KURV 4 Series Type 1 1879 molding is a Kuehn Bevel laminate edge molding with a subtle double Kurv soft bullnose profile, used to finish exposed edges on laminate, solid surface, or wood projects.
The Kuehn Bevel Trinidad Lapidus Mirage molding is 12 feet long, which helps span countertops or wall runs with fewer joints for a cleaner finished line.
The molding measures 1-9/16 inches wide by 5/16 inch thick, giving enough face to cover typical substrate edges while preserving the KURV 4 sculpted profile.
Kuehn Bevel edge moldings are made of moisture resistant MDF, providing a stable core for decorative edges in standard interior woodworking installations.
This molding can create decorative edges for laminate, solid surfaces, or wood and can also build a decorative backsplash, baseboard molding, or chair rail for coordinated trim.
The seamless one piece design with soft eased curves keeps the profile unbroken along a run, supporting smooth visual lines and reducing profile matching work at the edge.
This Kuehn Bevel edge molding in the KURV 4 Series Type 1 1879 Trinidad Lapidus Mirage finish offers a defined 12 foot x 1-9/16 inch x 5/16 inch profile, so projects can be planned around known dimensions. The subtle double Kurv soft bullnose and seamless one piece construction give installers a consistent decorative edge for laminate, solid surface, or wood applications. Using moisture resistant MDF as the base material supports typical interior woodworking environments where edges stay visible and functional over time. Choose this laminate edge molding when matching or contrasting trim and decorative backsplash, baseboard, or chair rail details are needed from a single coordinated profile.
Sold In: 1 Each